• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.10
• /
• pp.1550-1557
• /
• 2015

This study was conducted to evaluate the improvement effects of bitter taste of doraji (Platycodon grandiflorum) with different freezing temperature conditions ($-5^{\circ}C$, $-10^{\circ}C$, $-20^{\circ}C$, and $-70^{\circ}C$). After freezing for 4 h, frozen doraji was thawed and dehydrated. Doraji frozen at $-20^{\circ}C$ showed higher contents of crude fat, crude protein, crude ash, crude fiber, and nitrogen free extract. Moisture, crude saponin, and total polyphenol contents of doraji frozen at $-5^{\circ}C$ were higher than in other samples. Weight loss of doraji was significantly different as freezing temperature decreased and the process repeated. Doraji frozen at $-5^{\circ}C$ showed higher contents of saponin and phenol than the control. Hardness of doraji increased as freezing temperature decreased. According to the preference test, Doraji frozen at $-5^{\circ}C$ showed higher preference and less bitter taste intensity than other samples. These results mean that doraji frozen at $-5^{\circ}C$ with less bitter taste could be utilized widely as a food material.

• 한국해양학회지
• /
• v.8 no.1
• /
• pp.33-45
• /
• 1973

Plankton samples used for the present study were collected by the NORPAC net during the CSK cruises in the Korean waters in March and August, 1967. Regional and seasonal variations in the zooplankton biomass (wet weight, mg/㎥) were noticed in the Korean waters. In March the highest biomass, 130mg/㎥ on the average, occurred in the southern part of Japan Sea, but the lowest biomass of less than 50mg/㎥ occurred in the Yellow Sea and the western sea of Cheju Island Contrally, in August, the average biomass of 120mg/㎥ was measured in the Yellow Sea, the western sea of Cheju Island and the coastal waters of southern Korea, while the biomass of Japan Sea was the lowest of the regions surveyed. In comparison with the zooplankton biomass, total number of zooplankton per cubic meter of water strained also showed regional and seasonal fluctuations. In general, variations in the number of zooplankton specimens follows the same trend as in the biomass. The largest number, up to 800mg/㎥ on the average, occurred in the southern part of Japan Sea in March and the lowest number, less than 200mg/㎥ occurred in the Yellow Sea and the western sea of Cheju Island. In August, as shown by the biomass fluctuations, the largest number of zooplankton 850mg/㎥ on the average occurred in the Yellow Sea, the western sea of Cheju Island and the coastal region of southern Korea. But the lowest number of less than 500mg/㎥ was found in the Japan Sea. Among the various groups of zooplankton examined, the following were dominant components of the zooplankton population: Copepoda, Chaetognatha, Siphonophora, Euphausiacea, Cladocera, Appendicularia, and Amphipoda. The zooplankton conposition was significantly differed between the Japan Sea and Yellow Sea. Copepods which usually occupied over 66% in the Japan Sea and thd Korean Strait samples occupied only 42% of the catches in August, while cladocerans and chaetognaths were relatively abundant, i. e., 15 and 18% of the total organisms. The most dominant species of copepods and chaetognaths were Paracalanus parvus, Oithona similis, Acartia clausi, Calanus helgolandicus, Sagitta enflata, S. bedoti, S. elegans and S. crassa.

• Journal of Animal Science and Technology
• /
• v.51 no.4
• /
• pp.265-272
• /
• 2009

A total of 486 milk records were collected from 16 diary farms in Imsil-gun, Jeollabuk-do. Results obtained were as follows: The average 3MG (amount of milk within the first three minute) was 7.44 kg and 55% of total milk yield was produced within 3 min. The average of SPL (% of foam in milk) was 33.93% and the average of MNG (strip yield) was 0.14 kg, which was less than 1% of total milk yield. The averages of HMF (highest milk flow), HMG (maximum milk flow rate in one minute) and DMHG (average milk flow in the main milking phase) were 3.03 kg/min, 2.94 kg/min and 2.05 kg/min, respectively and the average milking speed in Imsil-gun was slower than other regions. The average of tS500(time to reach 0.5 kg/min at beginning) was 0.23min (about 14 seconds) and that of tMGG (duration of the total milking) was 7.75min. The average tMBG (duration of the dry milking phase) was 0.58 min (35 seconds) and that of tMNG (duration of the stripping phase) was 0.42min (14 seconds). The averages of ELHMF (electrical conductivity at highest milk flow) and ELAP (beginning peak level of the electrical conductivity) were 6.81 mS/cm and 7.58 mS/cm, respectively. The average of ELMAX (maximum electrical conductivity) was 7.48 mS/cm and that of ELAD (beginning peak difference of the electrical conductivity) was 0.61 mS/cm. While the total milk yields for DMHG, tMHG (duration of the main milking phase), tPL (duration of the plateau phase), tAB (duration of the descending phase) and tMGG were positively correlated (0.35~0.54), those for tMBG and SPL were negatively correlated (-0.11 and -0.27). As the DMHG increased, tMHG, tPL, tAB, tMGG and SPL decreased. While the cows with higher electrical conductivity at the beginning of milking had less somatic cell counts, cows with higher electrical conductivity after the peak of milk yield had more somatic cell counts. The results of this experiment indicated that through milking based on milking and lactating standards and the regular checking of milking status, the qualities of milk and milk yields could be improved.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.448-454
• /
• 2000

This study was to examine the physicochemical characteristics of coagulation reaction between ignited oyster shell powder (IOSP) and red tide organisms (RTO), and its feasibility, in developing a technology for the removal of RTO bloom in coastal sea,IOSP was made from oyster shell and its physicochemical characteristics were examined for particle size distribution, surface characteristic by scanning electron microscope, zeta potential, and alkalinity and pH variations in sea water. Two kinds of RTO that were used in this study, Cylindrotheca closterium and Skeletonema costatum, were sampled in Masan bay and were cultured in laboratory. Coagulation experiments were conducted using various c(Incentrations of IOSP, RTO, and a jar tester. The supernatant and RTO culture solution were analyzed for pH, alkalinity, RTO cell number, IOSP showed positive zeta potentials of $11.1{\~}50.1\;mV\;at\;pH\;6.2{\~}12.7$, A positive zeta potential of IOSP slowly decreased with decreasing pNa 4,0 to 2,0. When pNa reached zero, the zeta potential approached zero, When a pMg value was decreased, the positive zeta potential of IOSP increased until pMg 3.0 and decreased below pMg 3.0. IOSP showed 4.8 mV of positive zeta potential while RTO showed -9.2 mV of negative zeta potential in sea water. A positive-negative EDL (electrical double-layer) interaction occurred between $Mg(OH)_2$ adsorption layer of IOSP and RTO in sea water so that EDL attractive force always worked between them. Hence, their coagulation reaction occurred at primary minimum on which an extreme attractive force acted because of charge neutralization by $Mg(OH)_2$ adsorption layer of IOSP. As a result, the coagulation reaction was rapidly processed and was irreversible according to DLVO (Deriaguin-Landau-Verwey-Overbeek) theory. Removal rates of RTO were exponentially increased with increasing both IOSP concentration and G-value. The removal rates were steeply increased until 50 mg/l of IOSP and reached $100{\%}\;at\;400\;mg/l$ of IOSP. Removal rates of RTO were $70.5,\;70.5,\;81.7,\;85.3{\%}$ for G-values of $1,\;6,\;29,\;139\;sec^(-1)$at IOSP 100 mg/l, respectively. This indicated that mixing (i.e., collision among particles) was very important for a coagulation reaction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.435-444
• /
• 2009

Statement of problem: The clinical use of electric and electomagnetic fields for fracture healing applications began in the early 1970s. Since then, several technologies have been developed and shown to promote healing of fractures. Developments of these devices have been aided in recent years by basic research and several well controlled clinical trials not only in the medical field but in dentistry. Purpose: The purpose of this study was to compare alveolar bone reduction following immediate implantation using implants onto which magnets were attached in fresh extracted sockets. Material and methods: Four mongrel dogs were involved. Full buccal and lingual mucoperiosteal flaps were elevated and third and fourth premolars of the mandible were removed. Implants with magnets and implants without magnets were installed in the fresh extracted sockets and after 3 months of healing the animals were sacrificed. The mandibles were dissected and each implant sites were sampled and processed for histological examination. Results: The marginal gaps that were present between the implant and walls of the sockets at the implantation stage disappeared in both groups as a result of bone fill and resorption of the bone crest. The buccal bone crests were located apical of its lingual counterparts. At the 12 week interval the mean of marginal bone resorption in the control group was significantly higher than that of the magnet group. The majority of specimens in magnet group presented early bone formation and less resorption of the buccal marginal bone compared to the control group. Conclusion: Within the limitations of this study, it could be concluded that implants with magnets attached in the early stages of implantation may provide more favorable conditions for early bone formation and reduce resorption and remodeling of marginal bone.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.95-103
• /
• 1994

The safety related components in the nuclear power plant should be designed to withstand the seismic load. Among these components the integrity of reactor internals under earthquake load is important in stand points of safety and economics, because these are classified to Seismic Class I components. So far the modelling methods of reactor internals have been investigated by many authors. In this paper, the dynamic behaviour of reactor internals of Yong Gwang 1&2 nuclear power plants under SSE(Safe Shutdown Earthquake) load is analyzed by using of the simpled Global Beam Model. For this, as a first step, the characteristic analysis of reactor internal components are performed by using of the finite element code ANSYS. And the Global Beam Model for reactor internals which includes beam elements, nonlinear impact springs which have gaps in upper and lower positions, and hydrodynamical couplings which simulate the fluid-filled cylinders of reactor vessel and core barrel structures is established. And for the exciting external force the response spectrum which is applied to reactor support is converted to the time history input. With this excitation and the model the dynamic behaviour of reactor internals is obtained. As the results, the structural integrity of reactor internal components under seismic excitation is verified and the input for the detailed duel assembly series model could be obtained. And the simplicity and effectiveness of Global Beam Model and the economics of the explicit Runge-Kutta-Gills algorithm in impact problem of high frequency interface components are confirmed.

• Management & Information Systems Review
• /
• v.33 no.4
• /
• pp.1-19
• /
• 2014

This Study focuses on the university students' job attitude and cost of employment preparation. Nowadays, many university and college students spend a big money improving their employment preparation such as studying on foreign language, getting various kinds of certificates and tooth correction, clothing etc. for employment interview. This study investigated the cost of employment preparation and Job attitude of the 484 students of universities and colleges, the analysis of the collected data was conducted with SPSS 12.0 program by using frequency analysis, factor analysis, reliability assessment, correlation test, t-test, one way ANOVA. The university students paid more costs of employment preparation such as a language training abroad, a private training, and clothing than the college students. Also, Allied social science students paid more costs of the language training abroad, and clothing than allied computer science and allied design students. The female students paid more money than male students for tooth correction. The costs of language training abroad, private training and clothing are affected the students' socioeconomic background of a home. Regarding the job attitude of students, the university students are feeling more positive than the college students of the employment efficacy and cognition of the education environment. As result, the differences in the cost of employment preparation by the university type, faculty major course, their sex, and socioeconomic background of a home. The student's employment-efficacy and cognition of the education environment are also differences between the university and the college students. So, to improve the job attitude, developing their ability for employment preparation, educational programs should be arranged in school and continuous researches are needed.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1245-1255
• /
• 1997

Background : Rifampicin(RFP) is a key component of the antituberculous short-course chemotherapy and the RFP resistance is a marker of multi-drug resistant(MDR) tuberculosis. RPoB gene encodes the $\beta$-subunit of RNA polymerase of M. tuberculosis which is the target of RFP. And rpoB gene mutations are the cause of RFP resistance of M. tuberculosis. Although several reports showed that PCR-SSCP would be a rapid diagnostic method for identifying the RFP resistance, there were few reports Performed using direct, clinical specimens. So we Performed PCR-SSCP analysis of rpoB gene of M. tuberculosis in direct, clinical specimens. Methods : 75 clinical specimens were collected from patients at Asan Medical Center from June to August 1996. After PCR of IS 6110 fragments, 43 both AFB smear-positive and IS6110 fragment PCR-positive specimens were evaluated. The RFP susceptibility test was referred to the referral laboratory of the Korean Tuberculosis Institute. DNA was extracted by bead beater method. And heminested PCR was done using 0.1ul(1uCi) [$\alpha-^{32}P$]-dCTP. SSCP analysis was done using non-denaturating MDE gel electrophoresis. Results : The results of PCR of IS6110 fragments of M. tuberculosis were positive in 55(73%) cases of 75 AFB smear-positive clinical specimens. Of the 55 specimens, RFP susceptibility was confirmed in only 43 specimens. Of the 43 AFB smear-positive and IS6110 fragment-positive specimens, 29 were RFP susceptible and 14 were RFP resistant. All the RFP susceptible 29 strains showed the same mobility compared with that of RFP sensitive H37Rv in SSCP analysis of ropB gene. And all the other RFP resistant 13 strains showed the different mobility. In other words they showed 100% identical results between PCR-SSCP analysis and traditional susceptibility test. Conclusion : The PCR-sseP analysis of rpoB gene in direct clinical specimens could be used as a rapid diagnostic method for detecting RFP resistant M. tuberculosis.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.67-91
• /
• 2008

The purpose of this research is to find the identity through the inductive analysis on the curriculum of the industrial high schools in Gyeonggi province. The departments of electricity, electron, and correspondence of the 22 industrial high schools in Gyeonggi province are selected as the subject school of this research. The result of this research is as follows. First, 11 out of 18 industrial schools currently arrange larger completion unit of special curriculum than common one, and 2 out of 4 general high schools do. Second, industrial schools reduced 2-4 units of required subjects of the departments, general high schools did 2 units. 11 out of 18 industrial schools arranged larger student's elective subjects than school's in the completion unit of common curriculum, and 3 out of 4 general high schools did. 31 out of 32 departments of 18 industrial schools arranged larger student's elective subjects than school's in the completion unit of common curriculum. Third, 4 out of 18 industrial schools used the certified textbooks for newly organized subjects. But 25 departments of 15 schools out of 36 departments of 22 schools changed the industrial departments into high-tech ones. Fourth, in the classification of the school curriculum by 3-type curriculum, 12 out of 18 industrial schools adopted employment-centered curriculum, 7 out of 18 schools did foundation-centered curriculum. 2 out of 4 general schools adopted employment-centered curriculum, 2 out of 4 schools did college preparation-centered curriculum. Therefore, Schools are estimated to have much effort to find their identities through the arrangement of school curriculum.

• Clean Technology
• /
• v.27 no.2
• /
• pp.107-114
• /
• 2021

Material Life Cycle Assessment (MLCA) was performed to analyze the environmental impact characteristics of the Mg₂NiH_x-5 wt% CaO hydrogen storage composites' manufacturing process. The MLCA was carried out by Gabi software. It was based on Eco-Indicator 99' (EI99) and CML 2001 methodology. The Mg₂NiH_x-5 wt% CaO composites were synthesized by Hydrogen Induced Mechanical Alloying (HIMA). The metallurgical, thermochemical characteristics of the composites were analyzed by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), specific surface area analysis (Bruner-Emmett-Teller, BET), and thermogravimetric analysis (TGA). As a result of the CML 2001 methodology, the environmental impact was 78% for Global Warming Potential (GWP) and 22% for Eutrophication Potential (ETP). In addition, as a result of applying the EI 99' methodology, the acidification was the highest at 43%, and the ecotoxicity was 31%. Accordingly, the amount of electricity used in the manufacturing process may have an absolute effect on environmental pollution. Also, it is judged that the leading cause of Mg₂NiH_x-5 wt% CaO is the addition of CaO. Ultimately, it is necessary to research environmental factors by optimizing the process, shortening the manufacturing process time, and exploring eco-friendly alternative materials.