유한요소법을 이용하여 대전력용 트리가트론의 전극 전압의 극성 변화와 전극 구조의 변화에 따른 전계 분포를 해석하였다. 시동 특성을 좋게 하기 위해서는 트리거 전극과 접지 전극 사이의 적절한 거리를 찾아야 한다. 유한요소법을 이용한 전계 분포를 가지고 이 거리를 정할 수 있다. 본 논문은 트리거 갭과 주 갭(트리거 전극과 반대 주전극 사이)에서 동시에 절연 파괴가 일어날 때 트리가트론이 최적으로 동작한다는 연구 결과를 바탕으로 한다. 본 논문은 실험을 위한 예비 단계로서, 시뮬레이션을 통하여 최적의 전극 구조를 찾는데 드는 비용과 시간을 줄일 수 있다.
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.572-572
/
2013
본 연구에서는 Plasma damage-free 선형 대향 타겟 스퍼터(Linear Facing Target sputtering: LFTS) 시스템을 이용하여 성막시킨 GaN-LED의 투명전극용 Ga-doped ZnO (GZO) 박막의 특성을 연구하였다. LFTS 시스템을 이용한 GZO 성막 공정 중 LED소자의 플라즈마 노출에 의한 데미지를 최소화 하기 위해 일정한 타겟간 거리(Target-to-Target distance: 65 mm)에서 타겟과 기판간 거리(Target-to-Substrate distance)를 50 mm에서 120 mm로 변화시키며 GZO 투명 전극을 성막해 박막의 특성과 소자의 특성을 동시에 분석하였다. LFTS에서 플라즈마는 GZO 타겟 사이에 형성된 일방향의 자장에 의해 효과적으로 구속되기 때문에 기판과 타겟 거리를 최적화 할 경우 플라즈마 데미지를 최소화하며 GaN-LED의 제작이 가능하다. 기판과 타겟 사이의 거리가 120 mm에서 최적화된 200 nm 두께의 GZO 투명 전극은 DC 파워 250 W, 공정 압력 0.3 mTorr, Ar 20 sccm 실험 조건하에서 LED 소자 위해 성막되었으며, 이후 $600^{\circ}C$ 수소 분위기에서 1분간 급속 열처리하였고 면저항(37 Ohm/sq.)과 450 nm 파장에서의 투과도(83%)를 나타냄을 확인할 수 있었다. LED 소자와 타겟 사이의 거리가 50 mm에서 120 mm로 증가할수록 성막공정 중 LED 소자에 미치는 플라즈마 데미지의 감소로 인해 GaN-LED 소자의 turn on voltage가 8.2 V에서 3.4 V로 감소한 것을 확인하였으며, 또한 radiant intensity는 20 mA의 전류를 인가하였을 시 0.02 mW/sr에서 8 mW/sr로 400배 향상되었다. 이러한 소자 특성은 대향 타겟 스퍼터 시스템으로 성장시킨 GZO 투명전극이 LED 소자의 투명 전극 층(Transparent Conductive Layer: TCL)에 적용될 수 있음을 말해준다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.20
no.4
/
pp.29-36
/
2006
This paper deals with the potential interferences between grounding electrodes in various grounding electrodes. The ground potential rise and potential interference coefficients were measured by using and electrolytic tank and calculated by CDEGS program as functions of the configuration and size of grounding electrodes and the distance between grounding electrodes. The ground potential rise and potential interference coefficient strongly depend on the distance between grounding electrodes, the shape and size of grounding electrodes. The potential rise interferences between grounding grid and grounding grid is lower than those between grounding grid and ground rod.
Sin, Hyeon-Su;Seo, Gi-Won;Lee, Ju-Hyeon;Kim, Han-Gi
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.533-533
/
2013
본 연구에서는 선형 대향 타겟 스퍼터 시스템을 이용하여 hetero sputtering방법으로 증착한Al-Ga-Zn-O (AGZO) 박막의 기판-타겟간 거리(Target-to-Substrate distance)에 따른 전기적, 광학적, 구조적 특성을 분석하였다. 타겟과 기판 사이의 거리 변화(30~120 mm)에 따른 AGZO 박막의 특성 변화를 관찰하기 위하여 일정한 DC 파워 250 W, 공정압력 0.3 mTorr, Ar 20 sccm에서 서로 다른 AZO 타겟과 GZO 타겟을 이용하여 hetero-sputtering 공정을 진행하였다. 최적의 타겟과 기판 사이의 거리를 결정하기 위해 AGZO 박막의 투과도(T)와 면저항($R_{sh}$)을 기반으로 figure of merit ($T^{10}/R_{sh}$)값을 계산하였다. 기판-타겟간 거리는 AGZO 박막의 밀도에 영향을 주는 핵심 인자로 30 mm에서 120 mm로 증가수록 밀도가 낮은 AGZO 박막이 형성되었다. 최적의 타겟과 기판 사이의 거리(30 mm)에서 AGZO 박막은 132 Ohm/sq의 낮은 면저항과 87.2%의 높은 투과도를 나타내었다. 그러나 기판-타겟간 거리가 증가할수록 같은 두께에서 면저항은 급격히 증가함을 발견할 수 있었으며 이러한 특성 변화는 스퍼터되어 기판에 도달하는 입자의 에너지 차이로 설명이 가능하다. 따라서 본 연구에서는 기판-타겟간 거리에 따른 AGZO 박막의 특성 변화를 설명할 수 있는 메커니즘을 다양한 분석을 통해 제시하였다. 또한 적화된 AGZO 투명 전극을 이용해 제작한 GaN-LED의 Damage free sputtering 기술에 대해서 소개한다.
Journal of Korean Tunnelling and Underground Space Association
/
v.21
no.2
/
pp.267-278
/
2019
Variety of tunnel ahead prediction methods have been performed for safe tunnel construction during tunnel excavation. Pole-pole array among the electrical resistivity survey, which is one of the tunnel ahead prediction method, has been utilized to predict water-bearing sediments or weak zone located within 5 times of tunnel diameter. One of the most important processes is the estimation of virgin ground resistivity and it can be obtained from the following process: 1) calculation of contact area between the electrodes and the medium, and 2) assumption of the electrodes as equivalent spherical electrodes which have a same surface area with the electrodes. This assumption is valid in a small contact area and sufficient distance between the electrodes. Since the measured resistance, in general, varies with the electrode size, shape, and distance between the electrodes, it is necessary to evaluate the influence of these factors. In this study, theoretical equations were derived and experimental tests were conducted considering the electrode size, shape, and distance of cylindrical electrodes which is the most commonly utilized electrode shape. Through this theoretical and experimental study, it is known that one should be careful to use the assumption of the equivalent half-spherical electrode with large ratio between the penetrated depth and radius of the cylindrical electrode, as the error may get larger.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
1999.05a
/
pp.96-98
/
1999
유기전계발광소자(OELD)의 성능 향상을 위한 많은 연구가 진행되고 있지만 아직까지 금속전극과 유기발 광층 사이의 접촉저항(Contact Resistance)에 관한 연구는 거의 보고되지 않고 있다. Ohmic 접합에서 접촉 저항은 효율적이고 신뢰성 있는 소자제작에 있어서 간과되어서는 안될 매우 중요한 부분이다. 본 연구에서는 금속전극과 유기발광충 사이의 접촉저항에 관해서 논의하고자 한다. 본 연구에서 제작된 샘플은 금속전극으로 Ag, 유기발광재료로서 Alq$_3$를 사용하였으며, Alq3의 두께를 100 $\AA$에서 500 $\AA$까지 각각 다르게 하여 서로 다른 두께의 유기발광층을 가지는 샘플을 제작하였다. 금속전극의 매트릭스 구조에 의해 형성된 적선의 크기는 3 mm x 2 mm이며, 제작된 샘플의 접촉비저항은 TLM(Transmission Line Measurement) 방법을 이용하여 구하였다. Planar한 TLM model로부터 새로운 vertical model을 유추하였으며, 이를 근거로 접촉저항 및 transfer length 등을 계산하였다. 상온에서 측정된 전체 저항값은 유기발광층의 두께가 증가함 에 따라 증가하는 경향을 나타냈으며, 이 때 계산된 접촉비저항은 1.49$\times$$10^1$$\Omega$-$\textrm{cm}^2$ 이다. 접촉저항은 전극 사이의 거리의 증가에 따라 증가하지만, 측정시간의 thermal budget의 영향으로 상대적으로 전체저항이 감 소하였으나, 저항감소분의 포화에 따라서, 거리에 비례하여 다시 저항이 증가하였다.
본 논문은 높은 전기 역학적 결합 계수를 갖고 있는 64°LiNbO3기판에 leaky표면 탄성파를 이용하여 종 결합 형태의 대역이 넓고, 손실이 적은 필터의 제작을 위한 연구이다. 이 기판 위에 1차 모드와 2차 모드를 이용하고 입력 IDT와 출력IDT사이의 거리, 그리고 전 극의 두께 및 전극 개수를 적절하게 조절하므로서 통과 대역 폭이 15MHz이상, 삽입 손실 1.28dB 및 저지대역 50dB인 특성을 얻을 수 있었다. 아울러, 전극의 두께는 파장과의 비를 고려해 2500Å으로 할 때 최적의 결과를 얻을 수 있었으며, IDT와 IDT 사이의 거리는 0.25 λ, IDT와 반사기 사이의 거리는 0.46λ로 할 때 가장 이상적인 결과를 얻을 수 있었다. 제 작한 필터는 329.3MHz의 중심 주파수를 갖고 있는 소자로서 소형이고 낮은 삽입 손실을 갖 고 있으며, 무선 호출기에 사용 가능하다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.23
no.2
/
pp.96-102
/
2009
In this paper, the effects of the position and the angle of the potential probes on the measurements of the ground resistance with the fall-of-potential method are described and the testing techniques to minimize the measuring errors are proposed. The fall-of-potential method is theoretically based on the potential and current measuring principle and the measuring error is primarily caused by the position and angle of auxiliary probes. In order to analyze the relative error for measuring value of ground resistance due to the position of the potential probe, ground resistance were measured in case that the distance of current probe was fixed at 50[m] and the distance of potential probe was located from l0[m] to 50[m]. Also, the potential probe was located at 30[$^{\circ}$], 45[$^{\circ}$], 60[$^{\circ}$], 90[$^{\circ}$] and 180[$^{\circ}$]. As a consequence, relative error decreased with increasing the distance of potential probe and decreasing the angle between current probe and potential probe. The results could be help to determine the position of potential probe when the ground resistance was measured at grounding system.
Journal of Korean Tunnelling and Underground Space Association
/
v.25
no.2
/
pp.101-120
/
2023
Electrical resistivity survey have been widely conducted at diverse scales, from a few centimeters for laboratory tests to kilometers for field tests. It measures electrical resistance through relationship of electric potential difference and current between two electrodes penetrated on the surface of medium, and eventually quantifies electrical resistivity known as inherent properties of the medium. In field or full-scale test, it assumes the electrodes as equivalent half-sphere electrodes that have a same surface area with different electrodes for ease of calculation because the contact area between electrode and medium is small and sufficient distance between two electrodes. However, small-scale laboratory test is significantly affected by the electrode geometries (penetrated depth, height, radius of electrode and distance between electrodes), which change the equipotential surface and electric current flow. Indeed, the electrode geometries may eventually cause a difference of electrical resistivity value. This study reviews the theoretical electrical resistance derived with various electrode geometries (half-sphere, cylinder, cylindrical with half-spherical tip, cylindrical with conical tip) and verifies the developed numerical module by comparing results with the theoretical electrical resistance. The distributions of electrical resistance around electrodes and among electrodes are analyzed. In addition, it is discussed how the electrical characteristic of cylindrical electrode with conical tip widely used in field test has effect on the electric current flow.
본 논문에서는 대기상태에서 불평등 전계를 형성하는 봉대봉 전극사이에 절연판 장벽을 삽입하였을 때 절연특성이 개선되는 장벽효과를 실험적으로 연구하였다. 본 실험에서 전극사이에 각각 절연 장벽을 삽입하였을 때와 삽입하지 않았을 때의 섬락정압을 측정하고 또 여러 종류의 장벽 재료에 대해 장벽의 높이와 두께를 변화 시켰을 때의 섬락전압을 측정함으로써 장벽효과를 연구 검토하였다. 실험결과, 절연체 장벽을 각각 삽입하였을 때와 삽입하지 않았을 때의 섬락전압의 비는 1.3-2.0 정도임을 확인하였고 또한 장벽의 높이가 전극간 거리와 같아질 때까지는 섬락전압이 상승하였으나 그 이상일 때에는 변화하지 않음을 알 수 있었다. 또 장벽이 두꺼울수록, 장벽 재료의 유전율이 작아질수록 섬락정압이 상승하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.