• Journal of the Microelectronics and Packaging Society
• /
• v.2 no.2
• /
• pp.1-8
• /
• 1995

전자세라믹 부품으로 널리 사용되는 압전세라믹 발음체 디바이스의 응용과 그종류 를 분류하였고 특징, 구조와 작동원리 압전체로 사용되는 재료의 조성, 전극재료, 금속진동 판의 종류와 물성 압전반응체의 제조공정, 음향설계와 향후의 전망에 대하여 해설하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.91.2-91.2
• /
• 2010

SOFC는 높은 반응온도($600{\sim}1000^{\circ}C$)에서 작동되어 발전효율이 높고 다양한 연료를 사용할 수 있는 것이 장점이다. 하지만 고온에서의 운전은 구성요소의 열변형과 온도구배에 의한 전극촉매의 열화 그리고 밀봉재의 수명에 영향을 주어 결국 스택의 내구성을 감소시킨다. 특히 스택의 온도구배가 심화되면 국부적인 Hot spot를 형성하여 셀에 심각한 손상을 주게 된다. 본 과제에서는 SOFC 스택의 온도구배를 완화시키기 위한 내부개질기의 개발 및 고온용 분리판 소재의 정밀성형기술을 확보하고자 한다. 열/유동해석을 통하여 반응가스의 농도, 유속, 구조변경 등 내부개질기 온도구배에 대한 주요인자를 확인하였고, 장기 운전평가를 통하여 개질 촉매의 고온 활성 및 내구성에 대한 성능평가를 진행 중이다. 분리판의 경우, 고온용 소재(페라이트계 스테인레스)에 대한 기초실험을 실시하여 성형품질의 주요 인자를 파악하였으며 Proto-type 금형 설계 및 개발을 통하여 성형 기초기술을 확보하였다. 그리고 스택 내부온도를 구현할 수 있는 시뮬레이터를 설계 중에 있으며 이를 이용하여 개발된 내부개질기 및 분리판을 스택 운전환경에서 평가할 예정이다.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.72-78
• /
• 1999

The frequency characteristics of surface corona discharge from the electrodes on the ceramic substrate ozonator were investigated. The frequency characteristics of dark current were compared with that of corona discharge. Switching frequency which was the fraction of resonant frequency was found to be effective for corona discharge. This is regarded to distort the electric field distribution on the discharge plate which is essential for corona discharge. The measurement showed the efficiency of 28mg/W ozone generation when the switching frequency was 1/5 of the resonant frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.887-893
• /
• 1999

The characteristics of ozone generator targeted for air or water sterilizing in the vessel utilizing the surface corona discharge between the electrodes on the ceramic substrate was investigated by using the frequency control method. The frequency control was achieved by controlling the degree of resonance between the secondary winding inductance of transformer and the electrode capacitance of ceramic discharge plate, and the range of control was found to be 5 times of discharge current. This frequency control method showed the efficiency of 28 mP ozone generation and the stability within 3.4 % when the input voltage was varied within 40% range. The frequency control method is regarded to be more efficient way of corona discharge control compared to the conventional on/off control or voltage control methods.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.749-755
• /
• 2013

The purposes of this research are to know the optimal gab and electric pressure (voltage) of electrode-plates coated with activated carbon and also to study their arrangement through dust removal efficiency. From the experimental results of attached dust mass at different electrode-plate gab, the frequency of attachment and detachment of dust was more increased as electrode-plate gab was closer. In attached dust mass per unit area of electrode-plate, the farther electrode gab, the more increased. But in total attached dust mass, the closer electrode gab, the more removed. From the experimental results, the optimal electrode arrangement in dust removal chamber was considered that the forward parts of chamber need to be increased the number of electrode-plate, the backward parts to be increased them. The dust attachment have no relation with electric pressure while showing high removal efficiency under condition of 5 kV of voltage and 2 cm of electrode-plates gab.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.251-264
• /
• 2000

Organic removal from synthetic wastewater by electrochemical methods was investigated with various operating parameters, such as current density, retention time, electrode gap and $Cl^-/COD_{Cr}$ ratio. In electrolysis, dioxide iridium coated titanium ($IrO_2/Ti$) and stainless steel plate were used for anode and cathode respectively. The $COD_{Cr}$ removal efficiencies between plate type anode and net type anode were about same effect, but electrolytic power using net type anode is low than plate type anode. The $Cl^-/COD_{Cr}$ ratio was about $1.3kgCl^-/kgCOD_{Cr}$ when organic removal obtained 70 %, $Cl^-/COD_{Cr}$ ratio needs $2.2kgCl^-/kgCOD_{Cr}$ so as to organic completely remove. The removal efficiency of organics increased with current density, retention time and $Cl^-/COD_{Cr}$ ratio, but decreased with increasing electrode gap. The relationship of operating conditions and $COD_{Cr}$ removal efficiencies are as follows. $$COD_{Cr}(%)=80.0360(Current\;density)^{0.4451}{\times}(HRT)^{0.8102}{\times}(Gap)^{-0.4915}{\times}(Cl^-/COD_{Cr})^{0.5805}$$ There existed a competition between the removals for $COD_{Cr}$ and ammonium during electrolysis, the removal of ammonium was shown to be dominant and $COD_{Cr}$ removal was low. But $COD_{Cr}$ removal was raised as addition of alkalinity.

• Resources Recycling
• /
• v.10 no.3
• /
• pp.29-36
• /
• 2001

Cyclic voltammetry has been applied in the basic studies for the treatment and recovery of heavy metal component contained in wastewater by electrochemical reduction. The electrochemical behaviors of zinc ion for zinc metal electrode and carbon elec-trode were characterized by voltammograms and it was showed that zinc ions were reduced to metallic form below -0.76 V vs SHE. The change in the features of crystalline form of metallic zinc upon oxidation and reduction reaction was observed by X-ray diffraction method and the Am analysis verified that zinc ions were reduced to metal on copper plate. The results of this study were regarded to be important and meaningful in the treatment of heavy metal containing wastewater and, as a result, in the obtainment of metallic product by electrochemical method.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.193-200
• /
• 2021

As the degree of environmental pollution caused by the use of fossil fuels intensifies, many countries continue to invest in the development of alternative energy. PEMFC, one of the alternative energies, consists of four main components: bipolor plate, electrolyte, gas diffusion layer, and electrode. Among them, bipolor plate, the gas diffusion layer, and electrode are generally manufactured using carbon materials such as carbon black and carbon fiber. These carbon materials are expensive in manufacturing process or have disadvantages such as corrosion, and research is being conducted in many fields to improve this. This paper collects several research results conducted to improve the shortcomings of these three components and examines the trends of PEMFC by grasping what problems have been and how they have improved.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.563-569
• /
• 2005

In a direct sea water electrolysis system, deposits on the electrode cause decrease in the performance and increase in electrode damage. To reduce the deposition on the electrode, the modified cells were developed, namely: replaced grating type anodes with plate type ones; reduced the number of anodes from 9 to 8; widened the electrode gap from 2.4 mm to 3.0 mm; and reduced the number of spacers. that maintained the electrode gap, from 27 to 10. The developed cells were installed and tested at a power plant. The modified cells reduced deposition by 36~60%. The current efficiency increased by 15~20%. The electricity consumption reduced by 20%. In each case, the comparisons were between the modified cells and standard cells.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3731-3739
• /
• 2009

One-chambered sediment cells with a variety of anodic electrodes were tested for generation of electricity. Material used for anodes was iron, brass, zinc/iron, copper and graphite felt which was used for a common cathode. The estuarine sediment served as supplier of oxidants or electron-producing microbial habitat which evoked electrons via fast metal corrosion reactions or a complicated microbial electron transfer mechanism, respectively. Maximum power density and current density were found to be $6.90\;W/m^2$ (iron/zinc) and $7.76\;A/m^2$ (iron), respectively. Interestingly, copper wrapped with carbon cloth produced better electric performance than copper only, by 60%, possibly because the cloth not only prevented rapid corrosion on the copper surface by some degrees, but also helped growing some electron-emitting microbes on its surface. At anodes oxidation reduction potential(ORP) was kept to be stationary over time except at the very initial period. The pH reduction in the copper and copper/carbon electrodes could be a sign of organic acid production due to a chemical change in the sediment. The simple estimation of interfacial, electrical resistances of electrodes and electrolyte in the sediment cell that a key to the electricity generation should be in how to control corrosion rate or microbial electron transfer activity.