• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.6
• /
• pp.309-314
• /
• 2018

The wind load and structural characteristics of a twin building are more complex than those of conventional high-rise buildings. The pressure load due to wind on a twin building was therefore measured via wind tunnel experiments to analyze such characteristics. The wind pressure pattern was then deduced from measured data using proper orthogonal decomposition. Channeling and vortex shedding were observed in the first and second modes, respectively. The along-wind loads on the two buildings featured a positive correlation and the cross-wind loads featured no correlation. Such a correlation affected the wind-induced displacement. The structural member connecting the two buildings had an insignificant effect on the positive correlation, but it notably reduced the wind-induced displacement with a negative correlation.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1773-1777
• /
• 2008

The proper orthogonal decomposition(POD) is used to the modal analysis of microcantilever of dynamic mode atomic force microscopy(AFM). The proper orthogonal modes(POM) are extracted from vibrating signals of microcantilever when it resonates and taps the sample. We present recent ideas based on POD and detailed experiments that yield new perspectives into the microscale structures. The linearized modeling technique based on POD is very useful to show the principal characteristics of the complex dynamic responses.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.164-169
• /
• 2010

Proper Orthogonal Decomposition (POD) is applied to the analysis of 2-dimensional cylinder wake flow. Time histories of flow variables were obtained by the incompressible CFD analysis. By using the method of snapshots the correlation matrix was constructed, and then eigenvalues, POD modes and time coefficients were calculated. Finally the flow field was reconstructed by using a few of the lower POD modes, and compared to the original ones.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.171-174
• /
• 2010

적절한 근사화 과정을 통하여 구축된 축소 시스템은 전체 시스템의 거동을 적은 수의 정보를 통하여 효과적으로 표현할 수 있다. 효과적인 시스템 축소를 위하여 본 연구에서는 주파수 영역 Karhunen-Loeve (Frequency-domain Karhunen-Loeve, FDKL) 기법과 시스템 등가 확장 축소 과정(System equivalent expansion reduction process, SEREP)을 연동한 축소 기법을 제안한다. 적합직교분해(Proper orthogonal decomposition)의 한 방법인 FDKL기법을 통하여 최적모드(Optimal mode)를 구하고 이에 SEREP을 적용하여 자유도 변환 행렬을 구한다. 이때 주자유도 선정은 2단계 축소기법을 적용한다. 최종적으로 제안된 기법은 수치예제를 통하여 검증한다.

• Electronics and Telecommunications Trends
• /
• v.13 no.5 s.53
• /
• pp.53-64
• /
• 1998

본 고에서는 한파장 폐루프 공진기의 기본특성과 이를 활용한 이중모드 필터 구조 및 필터의 주요특징을 기술하였다. 또한 독립적인 직교공진모드를 이용한 폐루프 공진기의 특성과 공진기의 크기를 소형화 하는 기법 및 소형화 된 공진기의 공진조건 등을 기술하였고, 소형화 된 공진기를 이용한 듀플렉서의 응용 예 등에 대해 기술하였다. 폐루프 공진기를 이용한 이중모드필터 등은 마이크로 스트립 형태로 구현이 가능하기 때문에 MIC 또는 MMIC 등에 적합한 구조이며, 능동소자 등의 삽입이 가능하기 때문에 능동필터, VCO, 튜닝필터 등의 구현이 가능하고 소형의 듀플렉서 설계가 가능하기 때문에 향후 마이크로파 부품분야에서 기대되는 부품이라 할 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.729-738
• /
• 2021

Feedback flow control using an artificial neural network was numerically investigated for NACA0015 Airfoil to suppress flow separation on an airfoil. In order to achieve goal of flow control which is aimed to reduce the size of separation on the airfoil, Blowing&Suction actuator was implemented near the separation point. In the system modeling step, the proper orthogonal decomposition was applied to the pressure field. Then, some POD modes that are necessary for flow control are extracted to analyze the unsteady characteristics. NARX neural network based on decomposed modes are trained to represent the flow dynamics and finally operated in the feedback control loop. Predicted control signal was numerically applied on CFD simulation so that control effect was analyzed through comparing the characteristic of aerodynamic force and spatial modes depending on the presence of the control. The feedback control showed effectiveness in pressure drag reduction up to 29%. Numerical results confirm that the effect is due to dramatic pressure recovery around the trailing edge of the airfoil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.512-522
• /
• 2005

In this paper, an optimal determination method of the subband-frame size and mode-switching level is proposed for adaptive OFDM-TDD systems in frequency-selective time-varying channels. The optimization problem considering frequency selectivity. user's mobility, and the signaling overhead caused by the mode change information is formulated in the maximum spectral efficiency sense satisfying the target BER. Assuming that subband-frame size is given, the mode-switching level is first optimized so that the spectral efficiency can be maximized satisfying the target BER. The subband-frame size among candidates is then determined, which maximizes the spectral efficiency. Simulation results show that the proposed scheme outperforms conventional schemes, in terms of the spectral efficiency and the BER.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.461-466
• /
• 2015

Atomic force microscopy (AFM) is powerful tool for determining properties of samples based on interactions between the sample surface and an approaching probe tip. In this study, we modeled the interactions between the sample and the tip of the AFM microcantilever as a single nonlinear spring with an equivalent stiffness element and simulated the dynamic behaviors of the AFM microcantilevers using the finite element method (FEM) and ANSYS software. With the simulation results, we analyzed the complex dynamic responses of the AFM cantilever using proper orthogonal decomposition (POD). In addition, we compared the simulation and experimental results using the same method. Consequently, we suggest an effective method to express the interaction between the tip and sample, and we confirm that the influence of the higher order model due to the interaction between the tip and sample is increased.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.94-110
• /
• 2003

This study utilizes the dataset of Topex/Poseidon(T/P) altimeter sea surface height (1992-2000 yr., 286 cycles)to investigate the tempore-spatial variability in the East (Japan) Sea. Optimal interpolation (Ol) technique was applied to the pre-processed T/P dataset (level 2) to produce sea surface height anomaly (SSHA) map on regular grids. Spectral analyses of the timeseries of the SSHA at chosen stations and empirical orthogonal function (EOF) analysis of the SSHA in the entire East Sea were made. Distribution of the SSHA can be divided by the southern and northern regions sharply by the polar front situated in the middle of the East Sea. The southern region under the direct influence of the Tsushima Current exhibits higher amplitude of the SSHA fluctuation, while the northern region does relatively smaller one. The spatio-temporal variability of the SSHA in the East Sea can be characterized by the five modes of the EOFs accounting for more than 85% of the total variance. The first mode dominates the SSHA variation in the entire domain with strong seasonal and inter-annual periods accounting for the 72.3% of the total variance. The other modes (up to 5th account for 14%) are responsible for the SSHA variation associated with the local current system, meandering of the polar frontal axis, and mesoscale eddies. Spectral peaks with significant confluence level show semi-annual, annual and interannual (2, 3-4 years) periods.