• Title/Summary/Keyword: 적층 수

Search Result 1,391, Processing Time 0.029 seconds

Effects of processing parameters of alumina tape on the constrained sintering characteristics of LTCC (LTCC의 constrained sintering 특성에 미치는 알루미나 테잎의 공정변수영향)

  • Park, Seong-Dae;Cho, Hyun-Min;Yoo, Myong-Jae;Lee, Woo-Sung;Kang, Nam-Kee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2003.05c
    • /
    • pp.245-248
    • /
    • 2003
  • 저온동시소성 세라믹으로 제작된 모듈을 고주파 대역에 적용할 경우 dimension의 오차는 모듈 특성의 오차를 유발시킨다. Constrained sintering 기술은 XY 방향의 수축을 억제시킴으로써 세라믹 소결체의 dimensional tolerance를 향상시키기 위하여 개발된 기술이다. LTCC의 소성온도에서는 수축하지 않는 비소성층을 LTCC 적층체의 위 아래에 함께 적층시킴으로써 XY 방향의 수축은 기계적으로 억제되며, 두께 방향으로만 수축이 일어난다. 본 연구에서는 LTCC 기판을 constrained sintering 방법으로 소성하고, 그 특성값을 일반적인 소성방법으로 제작하였을 때와 비교하였다. 알루미나 테잎의 제조조건 빛 적층조건을 변화시켜 이에 따른 면수축 제어 특성의 변화를 고찰하였다. 실험결과 알루미나 테잎의 고형분 용량과 부착층의 두께가 면수축 제어를 위하여 고려되어야할 주요 인자임을 확인할 수 있었다.

  • PDF

Evaluation of Seismic Performance of Steel Frame before and after Application of Seismic Isolator (면진 장치 적용 전, 후의 철골조의 내진 성능 평가)

  • 김대곤;이상훈;안재현;박칠림
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.2 no.1
    • /
    • pp.47-62
    • /
    • 1998
  • The laminated elastomeric bearing and the lead-rubber bearing were designed to isolate one bay-two story steel frame which is designed for only gravity load. The seismic performance is evaluated for the designed steel frame before and after application of these seismic isolators between the super structure and the foundation. These isolators can improve the seismic capacity of the steel frame. Especially, by inserting the lead plug into the center of the laminated elastomeric bearing, the initial stiffness of th bearing can be increased, thus rather large lateral displacement can be prevented under the frequent service lateral load. During the strong earthquake, yielding of the lead can increase the capacity of the energy dissipation.

  • PDF

유연 OLED디스플레이 구현을 위한 박막 봉지 기술

  • Han, Ju-Hwan;Lee, Seong-Hyeon;Park, Jin-Seong
    • Information Display
    • /
    • v.20 no.3
    • /
    • pp.48-56
    • /
    • 2019
  • 유연 OLED 디스플레이 구현을 위한 박막 봉지 기술에 대해 두 가지 관점으로 살펴보았다. 첫 번째 다층 구조를 통한 박막 봉지 특성 개선에 대한 연구는 현재까지 다양한 연구들이 진행되어 왔으며 활발히 진행 중이다. 특히 우수한 투습 방지 특성을 가지며 동시에 기계적 내구성을 잃지 않기 위해 유 무기 적층구조는 중요한 연구 주제였다. 유기물 층은 다양한 소재, 증착 방법들이 연구되었으며 무기물 층은 ?고 좋은 특성을 가지기 위해 원자층 증착법을 활용하는 것이 중요하다. 특히 원자층 증착법이 대면적 증착이 가능하며, 균일도가 높다는 점에서 향후 양산에서도 활용이 가능하다는 점에서 원자층 증착법과 분자층 증착법을 통한 유 무기 적층 구조 연구가 중요하다고 할 수 있다. 또한 막에 구조적인 변화를 주어 가해자는 응력을 최소화하는 방법을 소개하였다. 이론적으로 전체막에서 외부 응력이 가해지더라도 받는 응력이 0이 되는 중립면을 활용하면 큰 외부 응력이 막에 가해지더라도 열화가 확연히 줄어든 연구 결과들이 있었다. 결론적으로 유연 OLED 디스플레이 구현하기 위해 박막 봉지 측면에서 이루어 져야 할 연구의 방향은 소재적으로 유 무기 적층 구조를 통한 막 내구성 및 투습 방지 특성 확보가 중요하고 구조적으로는 OLED 패널 제작 시 박막 봉지 층 이외에 상부 추가되는 막의 두께와 탄성 계수를 조절하여 기계적 내구성이 낮은 백플레인 부분과 박막 봉지 부분을 중립면에 위치시켜 외부 응력으로부터 자유로워 지도록 하는 방향으로 진행될 것으로 예상된다.

Vibration Analysis of Special Orthotropic Plates on Elastic Foundation with Arbitrary Boundaries (자유경계를 갖고 탄성기초에 놓인 특별직교이방성 적층복합판의 진동해석)

  • 김덕현;이정호;홍창우;심도식
    • Composites Research
    • /
    • v.12 no.4
    • /
    • pp.25-32
    • /
    • 1999
  • A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures, with irregular cross sections and with arbitrary boundary conditions was developed and reported by Kim, D. H. in 1974. In this paper, the result of application of this method to the special orthotropic plates on elastic foundation with free boundaries is presented. Such plates represent the concrete highway slab and hybrid composite pavement on bridges. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation and the aspect ratio of the plate on the natural frequency is thoroughly studied. The effect of neglecting the mass of the plates on the natural frequency, as the ratio of the point mass/masses to the plate mass increases, is also studied, in deep.

  • PDF

Development of Stacking and Transfer System for the Agile Fabrication (쾌속제작을 위한 적층 및 이송장치 개발)

  • 엄태준;주영철;민상현
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.3 no.2
    • /
    • pp.126-130
    • /
    • 2002
  • This paper presents the basic concept of new solid freeform fabrication system using rapid prototyping method. The system could fabricate an arbitrary ceramic form by laser cutting, transferring, stacking, and sintering of each slide. The system consists mainly of laser apparatus. X-Y table, a slide transferring system, and electric oven. The system could fabricate an object that has smooth surface with comparatively short period of time. The system is effective in terms of its direct fabrication capability without second mechanical process. The fabricated shape could directly be used as part of a whole assembly and therefore its method could be applied to various application areas.

  • PDF

MOCVD를 이용한 자발성장 InAs 양자점의 적층 성장 시 발생하는 파장변화량 제어

  • Choe, Jang-Hui;An, Seong-Su;Yu, Su-Gyeong;Lee, Jong-Min;Park, Jae-Gyu;Lee, Dong-Han;Jo, Byeong-Gu;Han, Won-Seok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.150-151
    • /
    • 2011
  • 양자점 Laser Diode(LD)는 낮은 문턱전류, 높은 미분 이득을 갖으며 또한 온도변화에도 안정적이기 때문에 광통신분야에서 광원으로 양자점 LD를 사용하기 위한 연구가 계속되고 있다. 양자점은 fill factor가 낮기 때문에 양자점의 밀도를 높이거나 양자점을 적층 성장하여 fill factor를 높인다. 그러나 양자점을 적층 성장하면 각 층간의 응력, 수직적 결합, 전기적인 결합이 생기며 이는 양자점의 전기적, 광학적 특성에 영향을 미친다. 본 연구에서는 metal organic chemical vapor deposition (MOCVD)을 이용하여 InP기판 위에 자발성장 법으로 InAs 양자점을 다주기 성장하였으며 photoluminescence (PL)을 이용하여 광학적 특성을 분석하였다. precursor는 trimethylindium (TMI), trimethylgalium (TMGa), $PH_3$, $AsH_3$를 사용하였으며 carrier gas는 $H_2$를 사용하였다. InAs 양자점은 1100 nm의 파장을 갖는 InGaAsP barrier 위에 성장하였고, InAs와 InGaAsP의 성장온도는 $520^{\circ}C$이며 InAs 양자점 성장시 V/III 비는 3.66으로 일정하게 유지하였다. 그림 1은 양자점 성장시간을 0.11분으로 고정하여 3주기(A), 5주기(B), 8주기(C) 성장한 구조이며 그림 2는 양자점 성장시간을 3주기마다 0.01분씩 줄여가며 3주기는 0.11분${\times}$3(D), 6주기는 0.11분${\times}$3+0.10분${\times}$3(E), 9주기는 0.11분${\times}$3+0.10분${\times}$3+0.09분${\times}$3(F) 으로 성장한 성장구조이다. 각 성장한 시료는 PL을 이용하여 파장과 반치폭을 측정하였다. 그림 3은 양자점 성장시간을 고정한 시료 A, B, C의 PL파장과 PL반치폭 데이터이다. PL파장은 A, B, C 시료 각각 1504 nm, 1571 nm, 1702 nm이며 반치폭은 각각 140 meV, 140 meV, 150 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 67 nm, 0 meV 6주기에서 9주기로 증가할 때는 131 nm, 10 meV 증가하였다. 다음 그림4는 양자점 성장시간을 조절하여 성장한 양자점 시료 D, E, F의 PL파장과 PL반치폭 데이터이다. PL파장은 D, E, F 시료 각각 1509 nm, 1556 nm, 1535 nm이며 반치폭은 각각 137 meV, 138 meV, 144 meV이다. PL파장과 반치폭은 각각 3주기에서 6주기로 증가할 때 47 nm, 1 meV 증가하였고, 6주기에서 9주기로 증가할 때는 21 nm 감소, 6 meV 증가하였다. 양자점 성장시간을 고정하여 다주기를 성장하였고 또 3주기마다 양자점 성장시간을 달리하여 다주기를 성장하였으며 PL을 이용해 광학적 특성을 연구하였다. 성장된 양자점의 PL 파장과 PL 반치폭 변화를 통해 적층구조에서 성장 주기가 늘어날수록 양자점의 크기가 증가하는 것을 확인하였고 또한 적층성장을 할 때 양자점 성장시간을 줄임으로써 양자점의 크기 변화를 제어 할 수 있었다.

  • PDF

A Study on the Implementation of an Agile SFFS Based on 5DOF Manipulator (5축 매니퓰레이터를 이용한 쾌속 임의형상제작시스템의 구현에 관한 연구)

  • Kim Seung-Woo;Jung Yong-Rae
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.42 no.1
    • /
    • pp.1-11
    • /
    • 2005
  • Several Solid Freeform Fabrication Systems(SFFS) are commercialized in a few companies for rapid prototyping. However, they have many technical problems including the limitation of applicable materials. A new method of agile prototyping is required for the recent manufacturing environments of multi-item and small quantity production. The objectives of this paper include the development of a novel method of SFFS, the CAFL/sup VM/(Computer Aided Fabrication of Lamination for Various Material), and the manufacture of the various material samples for the certification of the proposed system and the creation of new application areas. For these objectives, the technologies for a highly accurate robot path control, the optimization of support structure, CAD modeling, adaptive slicing was implemented. However, there is an important problem with the conventional 2D lamination method. That is the inaccuracy of 3D model surface, which is caused by the stair-type surface generated in virtue of vertical 2D cutting. In this paper, We design the new control algorithm that guarantees the constant speed, precise positioning and tangential cutting on the 5DOF SFFS. We develop the tangential cutting algorithm to be controlled with constant speed and successfully implemented in the 5DOF CAFL/sup VM/ system developed in this paper. Finally, this paper confirms its high-performance through the experimental results from the application into CAFL/sup VM/ system.

Seismic Response of Seismically-Isolated Nuclear Power Plants considering Age-related Degradation of High Damping Rubber Bearing (고감쇠고무 적층받침의 경년열화를 고려한 원전구조물의 지진응답)

  • Park, Junhee;Choun, Young-Sun;Choi, In-Kil
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.26 no.2
    • /
    • pp.131-138
    • /
    • 2013
  • The high damping rubber bearings contributed to reduce a seismic force transmitted to upper structures, the material properties of rubber changes with time and the rubber with age-related degradation can affect the seismic response of structures and equipments. Therefore the seismic response of structure considering age-related degradation of isolators should be evaluated. In this paper, the stiffness and damping for isolators were defined using the aging data proposed by other researchers. The reactor containment building and the auxiliary building were selected to conduct the nonlinear analysis and the natural frequency, maximum responses, floor response spectrum(FRS) were evaluated with time using the four earthquakes with different frequency contents. According to the analysis results, the seismic responses are increased by the age-related degradation of isolators and the detail inspections should be conducted up to 20 years because it was presented that the change of FRS was high during this period.

Buckling Analysis of Laminated Composite Plates under the In-plane Compression and Shear Loadings (면내 압축 및 전단하중을 받는 적층복합판의 좌굴 해석)

  • Lee, Won-Hong;Han, Sung-Cheon;Park, Weon-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.11 no.12
    • /
    • pp.5199-5206
    • /
    • 2010
  • In this paper, we investigate the buckling analysis of laminated composite plates, using a improved assumed natural strain shell element. In order to overcome membrane and shear locking phenomena, the assumed natural strain method is used. The eigenvalues of the laminated composite plates are calculated by varying the width-thickness ratio and angle of fiber. To improve an shell element for buckling analysis, the new combination of sampling points for assumed natural strain method was applied and the refined first-order shear deformation theory which allows the shear deformation without shear correction factor. In order to validate the present solutions, the reference solutions are used and discussed. The results of laminated composite plates under the in-plane shear loading may be the benchmark test for the buckling analysis.

A Study on the Standardized Finite Element Models for Carbody Structures of Railway Vehicle Made of Sandwich Composites (샌드위치 복합재 적용 철도차량 차체 구조물의 표준유한요소모델 제시 연구)

  • Jang, Hyung-Jin;Shin, Kwang-Bok;Ko, Hee-Young;Ko, Tae-Hwan
    • Journal of the Korean Society for Railway
    • /
    • v.13 no.4
    • /
    • pp.382-388
    • /
    • 2010
  • This paper describes the standardized finite element model for carbody structures of railway vehicle made of sandwich composites. Recently, sandwich composites were widely used to railway vehicle due to the improvement of energy efficiency, high specific stiffness and strength, weight reduction and space saving in korea. Therefore, structural integrity should be verified using finite element analysis prior to the manufacture of composite railway vehicle. The standardized finite element model for composite carbody structures was introduced through comparing the results of real structural test under vertical, compressive, twisting load and natural frequency test of various railway vehicles in this study. The results show that the quadratic shell element is suitable to model the reinforced metal frame used to improve the flexural stiffness of sandwich panel compared to beam element, and layered shell and solid element are recommended to model the skin and honeycomb core of sandwich panel compared to sandwich shell element. Also, the proposed standard finite element model has the merit of being applied to crashworthiness problem without modifications of finite element model.