• Title/Summary/Keyword: 적층성

Search Result 1,119, Processing Time 0.027 seconds

Buildability for Concrete 3D Printing According to Printing Time Gap (콘크리트 3D프린팅의 적층시간 간격에 따른 적층 성능)

  • Lee, Yoon Jung;Song, Jin-Soo;Choi, Seung-Ho;Kim, Kang Su
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.23 no.4
    • /
    • pp.131-136
    • /
    • 2019
  • Buildability of fresh concrete, a key element of Concrete 3D printing, is the ability to build filaments at a desirable height without excessive deformation or collapse. Buildability is closely related to yield stress, and the higher the yield stress, the better. Also, the shear stress of fresh concrete increases as it hardens over the time after extruded, and consequently the buildability increases. Therefore, in concrete 3D printing, proper time gaps between printed layers (Printing Time Gap, PTG) are required to ensure the buildability of fresh concrete. As the PTG increases, the buildability increases; however, an excessive PTG reduces the bond performance between the printed layers, and the extrudability can be lowered as the printing time increases. In this research, therefore, 3D printing experiments were conducted with the variable of PTG to examine the buildability of 100 MPa-high strength concrete. In addition, a pseudo-layer loading method was applied to simulate the buildability test for 3D concrete printing and its applicability was examined.

Stacking method of thick composite laminates considering interlaminar normal stresses (층간수직응력을 고려한 두꺼운 복합적층판의 적층방법)

  • 김동민;홍창선
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.12 no.5
    • /
    • pp.944-951
    • /
    • 1988
  • Global-Local Laminate Variational Model is utilized to investigate the characteristics of interlaminar stresses in thick composite laminates under uniform axial extension. Various laminates with different fiber orientation and stacking sequences are analyzed to observe the behavior of interlaminar normal stresses. From this result, the interlaminar normal stress distribution along the laminate interfaces is examined and discussed with an existing approximation model. The repeated stacking of Poisson's ratio symmetric sublaminates is found to be the best stacking method of thick composite laminates to reduce the interlaminar normal stresses for the prevention of the free-edge delamination.

Optimization of Microwave Absorbing Performance in Polymer Matrix Composite Laminate (고분자 기기 복합재료 적층판의 전자파 흡수 최적화)

  • 김진봉;김태욱
    • Composites Research
    • /
    • v.14 no.6
    • /
    • pp.38-46
    • /
    • 2001
  • In this study, An optimization code that can design microwave absorbing composite laminates is developed, and 3-layered microwave absorbing composite laminates are developed by optimizing the thickness of each layer. The layers are 3 different composite laminates. Many variables including lay-up angles of electromagnetically orthotropic composite layer can be considered in this code. The developed laminate is composed of an impedance matching layer of glass/epoxy fabric laminate, a glass/epoxy fabric laminate layer containing aluminum filler and carbon/epoxy fabric laminate layer. Permittivities of the materials are obtained using a network analyzer and a coaxial air line.

  • PDF

X-선 회절분석을 이용한 일라이트-스멕타이트 기본입자의 적층성에 관한 연구

  • 강일모;문희수
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2003.05a
    • /
    • pp.10-10
    • /
    • 2003
  • 일라이트-스멕타이트 혼합층광물(I-S)은 열역학적으로 상호 대립적인 두 가지 모델로 이해되고 있다. 첫째, MacEwan 결정자 모델은 I-S를 5-20개의 스멕타이트와 일라이트 층으로 구성된 결정자로 해석한다. 이러한 모델은 분산과 재응집 과정을 기초로 하는 X-선 회절분석(XRD)에서 기인한 것으로 Reynolds의 XRD 모델과 동일하다. 둘째, 기본입자 모델은 I-S를 물리적으로 분리될 수 있는 최소 입자인 기본입자가 $c^{*-}$축 방향으로 응집된 응집체로 해석한다. 이러한 모델은 분산 과정을 기초로 하는 주사전자현미경(TEM) 관찰에서 기인한 모델이다. 강일모 등(2002)은 이 두 가지 모델을 비교함으로써 1< $N_{F}$<100/% $S_{XRD}$ ( $N_{F}$=평균 기본입자 층개수, %$S_{XRD}$=XRD 분석을 통하여 측정된 팽창성)을 도출하였다. 이 식은 기본입자모델과 Eberl & Srodon(1988)이 제시한 최대 팽창성(%$S_{MAX}$)을 동시에 해석할 수 있게 해준다. %$S_{MAX}$는 XRD 모델에서는 고려하지 않는 I-S 결정자 상$\cdot$하부에 존재하는 두 개의 0.5nm 규산염층을 하나의 스멕타이트 층으로 간주하여 얻어진 팽창성이다. Srodon et al.(1992)은 %$S_{MAX}$=100/ $N_{F}$을 제시하였으며, 강일모 등(2002)은 %$S_{MAX}$는 기하학적으로 기본입자가 무한적층을 하였을 때 관찰되는 %$S_{XRD}$와 동일함을 밝힌 바 있다. 만약, XRD 분석을 위한 시료 준비과정에서 I-S 결정자가 분산되었다가 재응집을 한다면, XRD에서 관찰되는 결과는 일차적으로 기본입자의 적층성에 영향을 받게 된다. 따라서, 기본 입자의 적층성은 XRD 분석을 이용하여 I-S 구조를 해석하는데 매우 중요한 요인이다. 본 연구는 기본입자의 적층성을 정량화하기 위해 %$S_{XRD}$=A/ $N_{F}$ (0$S_{MAX}$=100/ $N_{F}$로부터 얼마나 벗어나 있는가는 지시해 준다 금성산화산암복합체에서 산출되는 11개 I-S 시료와 14개의 Drits et al.(1998) 자료로부터 1nA=-0.14 $N_{F}$+4.7의 실험식을 도출할 수 있었으며, 기본입자의 적층성은 일차적으로 기본입자의 두께에 의해 영향을 받는 것으로 관찰되었다. Nadeau(1985)는 기본입자두께분포로부터 I-S 결정자의 팽창성을 측정하기 위하여 Ps=$\Sigma$p(N)/N을 제시하였다(Ps=스멕타이트 층 비율, N=기본 입자 층개수, p(N)=N의 확율). 그러나 위식은 실질적으로 %$S_{MAX}$를 제공해주기 때문에 %$S_{XRD}$를 유추하는데는 부적합하다. 본 연구는 이를 변형하여 Ps=$\Sigma$p(N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.

  • PDF

Reliability Analysis of GFRP Laminated Composite Cylindrical Shells (GFRP적층복합재료관의 신뢰성 해석)

  • 조효남;이승재
    • Computational Structural Engineering
    • /
    • v.6 no.1
    • /
    • pp.117-125
    • /
    • 1993
  • In general, the strength and stiffness of laminated composite cylindrical shells are very sensitive to the variation of slenderness parameters, some coupling-stiffness parameters, lamination angles, stacking sequence and number of layers. In this paper, the effects of these factors on the strength and buckling reliabilities of GFRP laminated cylindrical shells are investigated based on the proposed strength and buckling limit state models. As these factors have various and complicated effects on the strength and buckling reliabilities of GFRP laminated cylindrical shells, the results should be incorporated into the design formula such that optimum design technique and design code which provide uniform consistent reliability for balanced design in practice

  • PDF

Thickness Assessment of Adhesive Layer in Inhomogeneous Layer by Guided Wave (유도초음파에 의한 비균질 적층의 접합층두께 평가)

  • Cho, Youn-Ho;Ham, Hyo-Sik;Choi, Heung-Ho
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.21 no.4
    • /
    • pp.391-397
    • /
    • 2001
  • The guided wave propagation in inhomogeneous multi-layered structures is experimentally explored based on theoretical dispersion curves. It turns out that proper selection of incident angel and frequency is critical for guided wave generation in multi-layered structures. Theoretical dispersion curves greatly depend on adhesive zone thickness, layer thickness and material properties. It was possible to determine the adhesive zone thickness of an inhomogeneous multi-layered structure by monitoring experimentally the change of dispersion curves.

  • PDF

Subparametric Element Based on Partial-linear Layerwise Theory for the Analysis of Orthotropic Laminate Composites (직교이방성 적층구조 해석을 위한 부분-선형 층별이론에 기초한 저매개변수요소)

  • Ahn, Jae-Seok;Woo, Kwang-Sung
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.22 no.2
    • /
    • pp.189-196
    • /
    • 2009
  • This paper presents the subparametric finite element model formulated by partial-linear layerwise theory for the analysis of laminate composites. The proposed model is based on refined approximations of two dimensional plane for orthotropic thick laminate plate as well as thin case. Three dimensional problem can be reduced to two dimensional case by assuming piecewise linear variation of in-plane displacement and a constant value of out-of-plane displacement across the thickness. The integrals of Legendre polynomials are chosen to define displacement fields and Gauss-Lobatto numerical integration is implemented in order to directly obtain maximum values occurred at the nodal points of each layer without other extrapolation techniques. The validity and characteristics of the proposed model have been tested by using orthotropic multilayered plate problem as compared to the values available in the published references. In this study, the convergence test has been carried out to determine the optimal layer model in terms of central deflection and stresses. Also, the distribution of displacements and stresses across the thickness has been investigated as the number of layer is increased.

Control of Physical Properties in Green Sheets and Matching with Ag-Pd Electrode (적층 액츄에이터용 그린시트의 물성 및 전극 Matching성 제어)

  • Lim, Chang-Bin;Hyun, Se-Young;Yeo, Dong-Hun;Shin, Hyo-Soon;Hong, Youn-Woo;Cho, Yong-Soo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2010.06a
    • /
    • pp.329-329
    • /
    • 2010
  • 적층 액츄에이터는 우수한 압전특성 및 그 재료가 가진 고유한 특성 때문에 최근 이동통신 단말기용 햅틱 소자 및 PC 와 그 주변기기로 수요가 폭발적으로 증대되고 있으며, 향후에도 CATV 네트워크와 무선통신기기를 비롯한 디지털 통신분야로 응용분야가 확대되리라 예상된다. 적층 액츄에이터에서 발생되는 에너지는 세라믹 그린시트 두께와 전극 면적에 비례하여 변위 및 응력이 증가하게 되므로 고적층형에 대한 필요성이 증대되고 있다. 이러한 고적층 액츄에이터의 경우 소성과정에 서 warpage 및 de-lamination 같은 결함이 발생하기 쉬우므로 그린시트의 균일성 및 전극과의 matching성 확보가 중요한 요소이다. 본 연구에서는 슬러리의 분산성과 시트 내 유기물 함량 최적화 실험을 진행하여 적층 액츄에이터용 그린시트를 최적화 한 후 공정 적용성 및 저온소성 전극인 Ag-Pd 전극과의 매칭성을 확보하고자 하였다. 이러한 후막공정 기술 개선을 통해 적층 액츄에이터를 제조하여 압전 특성을 측정하였다.

  • PDF

Papers : Panel Flutter Analysis of Isotropic and Composite Plates Including Structural Damping (논문 : 구조감쇠를 고려한 등방성 평판 및 복합적층판의 패널 플러터 해석)

  • Gu, Gyo-Nam
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.30 no.3
    • /
    • pp.115-122
    • /
    • 2002
  • 구조감쇠가 복합적층판의 초음속 패널 플러터에 미치는 영향을 연구하기 위해 에너지법을 활용하여 지배방정식을 유도하였다. 구조 모델링은 일반적인 고전 적층판 이론을 적용하고 이의 해석은 진동 모우드를 가정하는 Rayleigh-Ritz법을 이용하였다. 비정상 공기력은 피스톤 이론(piston theory)을 적용하였다. 구조감쇠가 패널의 플러터에 미치는 일반적인 영향을 고찰하기 위해 등방성 평판의 구조감쇠의 크기에 따른 임계동압을 계산하였으며 이로부터 구조감쇠가 플러터 안정성을 감소시킬 수 있음을 확인하였다. 또한 복합적층판의 적층각에 따른 임계동압을 계산하여 패널 플러터와 구조감쇠와의 관계를 파악하였다. 구조감쇠는 낮은 공력감쇠에서는 플러터 안정성에 중요한 역할을 하지만 높은 공력감쇠에서는 거의 영향을 미치지 않았다.

원공노치를 가진 CFRP의 적층방향에 따른 기계적 특성 평가

  • 태영일;윤유성;권오헌
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 2001.11a
    • /
    • pp.349.2-363
    • /
    • 2001
  • 안전성의 측면에서 기계설비 및 구조물의 파손을 유발할 수 있는 재료손상에 대한 평가는 매우 중요하기 때문에, 사용 목적에 부합되는 우수한 첨단재료의 개발과 그 특성을 파악할 필요성이 있다 그 중에서 섬유강화 복합재료는 금속재료보다 높은 비강도와 비강성을 가지며 적층각도, 적층순서 및 경화방법에 따라서 원하는 강도와 강성을 가질 수 있다 특히, 탄소섬유강화복합재료(CFRP)는 스포츠용품에서 최신 항공기의 구조재료에 이르기까지 경량화 관점에서 기존의 재료를 대체해 나가고 있다.(중략)

  • PDF