• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.169-171
• /
• 2001

38GHz 밀리미터파의 국내 적용을 위한 서울지역의 전파환경시험을 통한 적정거리 도출을 위한 기초 Data를 수집하여 전파환경시험을 수행함으로써 기후 및 적응거리등에 따른 기술자료 확보 및 적정거리 도출을 통하여 전송망 구축 설계시 반영하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.65-72
• /
• 2011

When an expressway intersects another expressway, a unique connector needs to be designed between the two consecutive exit ramps. In such a case, it is important to design a connector such that there is enough distance for drivers to find their way safely. A current design manual in Korea prescribes the minimum length of the connector as 240 m. In this research, we have suggested a method for calculating the minimum length of a connector in order to check the feasibility of the currently prescribed length. For this purpose, we have attempted to determine the total perception-reaction time and lane-changing time required by a driver. For determining the driver's perception-reaction time, we have used the driver's decision time in addition to the conventional 2.5 s of perception-reaction time for stopping sight distances. We have considered both the design speed and the average travel speed for the calculation of the length. To evaluate the accuracy of the new method, we have chosen four sites on expressways for which relatively high accident rates were recorded. As a result, we could verify that the current limit (240 m) was sufficient for drivers to be able to change lanes in the given specific geometry. However, the prescribed limit should be revised in case the drivers' decision time is considered to be their perception-reaction time. All new approaches for calculating the ideal length of a connector have been carried out by taking into account the design speed as well as the average travel speed. Owing to the characteristics of the specific geometry for two consecutive exit ramps and the large difference between the design speed and the average travel speed in the objective areas, it is more realistic to use the proposed method by keeping the decision time equal to a driver's perception-reaction time, in order to determine the ideal distance that should be maintained between two consecutive exit ramps.

• Journal of the Korea Society for Simulation
• /
• v.30 no.3
• /
• pp.31-39
• /
• 2021

During artillery fire, an excessive level of impulse noise propagating in the form of a storm wave is generated. Since the sound of impact from the fire affects the stability of the surrounding structures, the artillery and the structures must be separated from each other by the proper distance to avoid damages from friendly fire. However, if they have already been built within the distance, it is possible to prevent the damages by building sound barriers between them. In this study, the proper separation distance between the artillery and the structure was calculated, and the insertion losses due to various heights and shapes of the sound barrier were simulated by using the BEM(Boundary Element Method), and conclusively the optimal sound barrier was selected.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.130-132
• /
• 2006

Objective of this study was conducted to determine the proper transplanting distance for turf cultivation in the bare land. For investigating the proper transplanting distance of turf cultivation, it were measured the growth characteristics as plant height, root length, number of branching, number of nodule and length of stolon, and yield properties such as fresh weight and dry matter. In $30{\times}30cm$ of transplanting distance plot, plant height, root length, number of branching, number of nodule and length of stolen were 14.1cm, 22.0cm, 7.0, 31 and 77.5cm, and also the fresh weight and dry matter were 16.1 and 11.0g/plant, respectively. It was observed that growth characteristics and yield properties were highest at $30{\times}30cm$ of transplanting distance, respectively. Therefore, it considered that the proper transplanting distance was $30{\times}30cm$ for turf cultivation in the bare soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.335-338
• /
• 1992

A Cheju-leading mungbean cultivar Seonhwanogdu was seeded at 20, 30, 40, 50 and 60cm row width with within-row plant spacing of 10cm in mid-June of 1988 to 1990 to determine effects of row width on growth and seed yield of mungbean in Cheju area. Initial flowering and maturing dates were not influenced by the row width. Stem length, pods per plant, seeds per pod, 1000-seed weight linearly decreased as row width decreased because planting density increased. The relationship between seed yield and row width was quadratic, and the optimum row width with within-row plant spacing of 10cm for higher yield of mungbean was 40cm in Cheju.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.62-70
• /
• 2016

Increased bus traffic leads inefficiency at near-side bus stops in median exclusive bus lane because buses are waiting for a signal does not have a vehicle arrived. This study suggests a method for estimating a proper spacing between bus stops and signalized intersection to prevent the inefficiency. We modified the Poisson model for a proper spacing by using both dwell time and waiting time of signal instead of using dwell time only. The waiting time of signal changes by spacing and it was measured using micro simulation program. The iterative algorithm using the change of waiting time of signal was also suggested. By applying the proposed method, measure waiting time by simulation and iterative algorithm, the spacing of near-side bus stops, proper spacing is suggested according to flow rate level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.707-714
• /
• 2021

An important factor that causes delays at roundabouts is unbalanced traffic conditions. The majority of domestic studies have tendedto focus on the proportion of entering traffic rather than conflicting traffic in order to explain unbalanced traffic conditions. Also, there is scant research on the proper distance between a signalized intersection and a roundabout. In this study, therefore, unbalanced traffic conditions and optimal distance between two intersections were analyzed using SIDRA software based on the Gajwa-ro roundabout in Icheon, where unbalanced traffic conditions occur during afternoon peak hours, and its position is 295 m from a signalized intersection. It was found that a state of unbalanced traffic conditions in the form of conflicting traffic caused delays at Gajwa-ro roundabout, and the queuing length on each approach was removed when there was 850 m of distance between two intersections.

• Journal of Korean Society of Transportation
• /
• v.17 no.1
• /
• pp.67-74
• /
• 1999

Where an interchange is located just after a tunnel not only it is impossible to install the traffic signs in tunnel sections but also sufficient sight distance to identify the interchange can't be provided. The objective of this study is to suggest the safety based spacing between tunnel and interchange. For this study accident rate was used as an index representing characteristics for vehicle operation to suggest the appropriate spacing. Traffic volume and the number of accidents on freeway from 1992 to 1997 were analyzed. The relationship between accident rate and spacing represents negative logarithm function such that shorter spacing increases accident rate. An appropriate safety based spacing between tunnel and interchange for four lane freeway with the design speed of 100kph was found as 2.6km.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.140-143
• /
• 2011

산불의 확산형태 중 지표화 확산을 방지하기 위해 대표적인 진화방법으로는 방화선을 구축하는 것이다. 지표화는 산림의 연료중 낙엽층, 잔가지 등 지표면의 연료층이 열분해되면서 확산되기 때문에 방화선 구축을 통해 연료층을 제거하면 지표화 확산을 저지할 수 있다. 하지만 방화선 구축 폭에 따라 산불확산 방지 효과가 크게 달라질 수 있으므로 적정한 방화선 구축 폭을 설정하여야 한다. 본 연구에서는 적정 방화선 구축 폭을 살펴보기 위해 풍동시험장치를 이용하여 풍속 0, 1, 2, 3m/s조건에서 지표화 화염으로부터 이격 거리에 따른 온도측정과 함께 방화선 구축 폭에 따른 확산가능 여부를 평가하였다. 50cm 폭의 소나무 낙엽에 대한 풍속별 지표화 방화선 구축 실험결과, 풍속 3m/s에서 화염으로부터 소나무 낙엽의 착화온도인 $311^{\circ}C$에 도달하는 거리가 약 0.65m로 나타났고 풍속이 낮을수록 착화온도 도달거리가 줄어드는 것을 알 수 있다. 실제 0.6m 방화선 구축의 경우, 화염이 계속 확산되었고 0.65m 이상의 방화선 구축시에는 화염확산이 이루어지지 않았다. 따라서 향후, 수치해석을 이용한 열유속 평가 결과와 함께 본 연구의 실험결과와 비교평가 함으로써 지표화 산불확산 방지를 위한 적정 방화선 구축 폭 산정을 평가하고자 한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.430-433
• /
• 2011

산불 진화에 사용되는 지상 주력 장비를 대상으로 수원으로부터 호스 거리 및 고도에 따른 성능을 정량화하기 위한 현장 적용 실험을 실시하였다. 대조군으로는 담수지 형태의 수원을 사용하고 수원으로부터 고도차가 40m 수준인 예비실험을 대상으로 성능값을 비교하였다. 본 현장 적용 실험에서는 산림 내 계곡지를 수원으로 하였으며, 고도차가 150m 로 예비실험의 3.75배인 지형을 선택하였다. 고도에 따른 영향이 크지 않은 예비 실험과 비교하였을 때 고도가 높아질수록 동일 거리에서 측정한 성능값은 평균 50% 이상의 감소를 나타내었다. 그러나 수평 및 수직 거리는 20% 이내 수준의 감소를 나타내어 진화에 큰 장애 요소로는 작용하지 않았으며, 펌프압력은 소형펌프의 압력 상승이 가장 큰 상승률을 나타내었다. 이와 같은 결과는 수원의 형태에 따라 용수 공급차에 기인한 것으로 안정적 용수공급 저하, 펌핑압 부하 증가, 이물질 삽입 등이 원인인 것으로 사료되며, 고도에 따른 영향 인자도 반영된 것으로 해석된다. 또한 실험을 통해 진화장비별 실제 진화대원의 적정 사용거리와 거리별 적정 소요인원을 산출할 수 있었다.