• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.30-37
• /
• 2003

In this paper, a discrete wavelet transform (DWT)-based watermarking system is proposed. The main feature of proposed system is that the embedding system uses adaptive thresholds to control the trade-off between the qualify of the watermarked image and the capacity of the watermark, and the trade-off between the quality and robustness of the watermarked image. Also, the extracting system rebuilds threshold according to various attacks and decides a watermark bit from the least distorted coefficient after measuring the distortion of coefficient. Finally, a new measure to detect the uniqueness of watermark is proposed. The experimental result shows that the proposed watermarking system is robust against conventional signal processing and intentional attacks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1518-1526
• /
• 1993

It has been known that the amplifiers for high power signal in satellite communication channels suffer from nonlinear distortions, which reduce the performance of the communication channel significantly. In order to compensate the nonlinear distortion, a new data predistortion method with the LMS algorithm is proposed in this paper, Whereas the previous approach handles this problem by assigning corresponding predistorter to each symbol for the case of 16-QAM, the proposed approach uses the same memory for the symbols, which have identical amplitudes, and predistors the input of high-power amplifiers by the amplitude and phase differences, resulting in better adaptive data predistorter with small number of digital memory (3 predistorters) and fast convergence rate. Superiority of the proposed approach in the paper is demonstrated by comparing it with the previous approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.276-281
• /
• 2014

In this research, we describe a force feedback control for industrial robots has been proposed as a system which is suitable to work utilizing pressure sensitive alternative to human. Conventionally, polished surface of the workpiece are recognized, chamfer ridge, machining processes such as deburring, and it is most difficult to automate because of its complexity, has been largely dependent on the human. To aim to build automatic vacuum system robotic force control was gripping the grinding tool, the present study we examined the adaptability to the polishing process to understand the characteristics of the control system feedback signal obtained from the force sensor mainly. Furthermore, as a field, which holds the key to the commercialization, I went ahead with the application to robotic sweeping machine. As a result, the final sweeping utilizing a robot machine to obtain a very good grinded surface was revealed.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.458-467
• /
• 2010

In this paper, a new audio reproduction system was developed in which the cross-talk signals would be reasonably cancelled at an arbitrary listener position. To adaptively remove the cross-talk signals according to the listener's position, a method of tracking the listener position was employed. This was achieved using the two microphones, where the listener direction was estimated using the time-delay between the two signals from the two microphones, respectively. Moreover, room reverberation effects were taken into consideration where linear prediction analysis was involved. To remove the cross-talk signals at the left-and right-ears, the paths between the sources and the ears were represented using the KEMAR head-related transfer functions (HRTFs) which were measured from the artificial dummy head. To evaluate the usefulness of the proposed listener tracking system, the performance of cross-talk cancellation was evaluated at the estimated listener positions. The performance was evaluated in terms of the channel separation ration (CSR), a -10 dB of CSR was experimentally achieved although the listener positions were more or less deviated. A real-time system was implemented using a floating-point digital signal processor (DSP). It was confirmed that the average errors of the listener direction was 5 degree and the subjects indicated that 80 % of the stimuli was perceived as the correct directions.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.173-180
• /
• 2006

An airborne radar is an essential aviation electronic system of the aircraft to perform various missions in all weather environments. This paper presents the design, development, and test results of the multi-mode pulsed Doppler radar system test model for helicopter-borne flight test. This radar system consists of 4 LRU units, which include ANTU(Antenna Unit), TRU(Tx Rx Unit), RSDU(Radar Signal & Data Processing Unit) and DISU(Display Unit). The developed technologies include the TACCAR processor, planar array antenna, TWTA transmitter, coherent I/Q detector, digital pulse compression, DSP based Doppler FFT filtering, adaptive CFAR, IMU, and tracking capability. The design performance of the developed radar system is verified through various helicopter-borne field tests including MTD (Moving Target Detector) capability for the Doppler compensation due to the moving platform motion.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.75-84
• /
• 2003

Current techniques for road-traffic monitoring rely on sensors which have limited capabilities, are costly and disruptive to install. The use of video cameras coupled with computer vision techniques offers an attractive alternative to current sensors. Video based traffic monitoring systems are now being considered key points of advanced traffic management systems. In this paper, we propose the new method which extract the traffic information using video camera. The proposed method uses an adaptive updating scheme for background in order to reduce the false alarm rate due to various noises in images. also, the proposed extraction method of traffic information calculates the traffic volume ratio of vehicles passing through predefined detection area, which is defined by the length of profile occupied by cars over that of overall detection area. Then the ratio is used to define 8 different states of traffic and to interpret the state of vehicle flows. The proposed method is verified by an experiment using CCTV traffic data from urban area.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

Blocking and ringing artifacts continue to be the most serious defects that occur in images and video streams compressed to low bit rates using block-based discrete cosine transform(DCT) compression standards. These artifacts contain the high frequency components near the block and the edge boundaries. Usually the lowpass filter can remove them. However, simple lowpass filter results into blur by removing important information such as edges at the same time. To overcome these problems, we propose a novel postfiltering algorithm that calculate the weight value based on the intensity similarity in the neighboring pixels and multiply this weight to the Gaussian lowpass filter coefficient. Experimental results show that the proposed technique provides satisfactory performance in both objective and subjective image quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1483-1489
• /
• 2022

Recently, due to the influence of the 4th industrial revolution and the development of communication media, various digital video equipment are being used in industrial fields. Image data is easily damaged by noise in the process of acquiring and transmitting and receiving from the camera and sensor, and since the damaged image has a great effect on the processing of the system, noise removal is essential. In this paper, a weight filter algorithm using a weight graph is proposed to restoration images damaged by high-density impulse noise. The proposed algorithm obtains a weight graph using pixel values inside the filtering mask of the image, and restores the image by applying the final weight to the filtering mask. Simulation was conducted to analyze the noise removal performance of the proposed algorithm, and the magnified image and PSNR were used to compare with the existing method. The resulting image of the proposed algorithm showed excellent performance by removing high-density impulse noise.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.437-443
• /
• 2018

Activation of macrophages plays an important role in the host-immune system. In this study, we investigated the functional roles and related signaling mechanism of hot-water extracts of bee pollen (BPW) in RAW 264.7 macrophages. Since BPW did not exert cytotoxicity at concentrations ranging from 62.5 to $250{\mu}g/mL$ in macrophage cells, a concentration of $250{\mu}g/mL$ was used as the maximum dose of BPW throughout subsequent experiments. BPW increased inducible nitric oxide synthase-mediated nitric oxide production in a concentration-dependent manner. Additionally, BPW was found to induce macrophage activation by augmenting the expression of cell surface molecules (cluster of differentiation; CD80/86, and major histocompatibility complex; MHC class I/II) and production of pro-inflammatory cytokines (tumor necrosis $factor-{\alpha}$, interleukin-6, and $IL-1{\beta}$) through mitogen-activated protein kinase and nuclear $factor-{\kappa}B$ signaling pathways in RAW 264.7 macrophages. Taken together, our results indicate that BPW could potentially be used as an immunomodulatory agent.

• 전기의세계
• /
• v.29 no.3
• /
• pp.170-176
• /
• 1980

이 논문은 제어신호가 이상적인 포화특성을 갖은 제작조건하의 시불변, 선형 제어계의 시최적화 제어기구의 설계이론을 비교 연구하는데 목적을 두었다. 어떤 초기상태에 있는 계를 특정된 최종상태로, 최단시간내에 이행시켜 가는데 요구되는 제어기구의 설계문제는 여러해 동안 흥미있는 연구과제로 학계에 등장되었고 이러한 문제를 처리하는데에는 여러가지의 설계방법이 제안되어 왔다. 이 논문에서는 이러한 최적화 제어기구의 설계 이론중, 상태천이법에 의한 방법, 최대원리의 적용에 의한 방법 및 동적 프로그래밍기법에 의한 방법들을 서로 비교하여 2차계의 시최적화 설계사례에 이들을 적용시킴으로써 그 설계법상의 문제점을 비교 검토하여 보려는데 목적을 두었다. 설계사례 2차계는 시불변, 선형인 것으로 가정하였으며, 초기상태벡터 및 최종상태벡터는 모두 특정된 값으로 지정되고 제어신호는 이상적인 포화특성으로 제약받으며 스윗칭 시간이 유한크기가 아닌 정규형인 경우에 한정시켜 다루었다. 어느 설계이론을 적용시키나 시최적화를 위한 제어측은 단속제어방식으로 결과되었으나, 시최적화 문제의 특수성때문에 최대원리 및 동적 프로그래밍기법의 적용사례에서는 자연경계조건 및 Transversality 조건 등이 스윗칭시간 또는 최종시간을 직접 결정하여 주는 관건은 되지 못하였으며 계통의 상태방정식 또는 보조상태방정식을 구속제약된 양단상태량을 만족하도록 최적에어측을 적용하여 풀므로써 스윗칭시간과 최종시간이 얻어진다. 따라서 어느 한가지 방법의 적용만으로는 수학적인 처리상의 애로는 피할길이 없었으며 Hamiltonian함수의 변화성질을 보조적으로 활용하여 가면 이러한 번거로움이 덜하여 지긴하나, 다루는 계통의 차수가 높을 수록 이러한 수치해를 얻기위한 번거로움은 여간한 험로가 아닌 것으로 생각된다. 결론적으로 이러한 시최적화문제의 설계에는 몇가지의 혼용적용이 바람직하다고 결론된다. 이의 개발에 박차를 가하지 않을 수 없는 것이다.고, 우선 여기서는 당면문제로서 대처하지 않으면 안될 자동주파수제어문제및 계통의 경제운용문제만에 한정하여, 이것을 우리나라의 현상과 관련시켜 개설하고, 이들의 자동화에 관한 기본적인 문제를 간단히 적어 보겠다. 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다. 시대를 살아 갈 회원들이다. '컨텐츠의 시대'가 개막되는 것이며, 신세기통신과 SK텔레콤은 선의의 경쟁 과 협력을 통해 이동인터넷 서비스의 컨텐츠를 개발해 나가게 될 것이다. 3배가 높았다. 효소 활성에 필수적인 물의 양에 따른 DIAION WA30의 라세미화 효율에 관하여 실험한 결과, 물의 양이 증가할수록 그 효율은 감소하였다. DIAION WA30을 라세미화 촉매로 사용하여 아이소옥탄 내에서 라세믹 나프록센 2,2,2-트리플로로에틸 씨오에스터의 효소적 DKR 반응을 수행해 보았다. 그 결과 DIAION WA30을 사용하지 않은 경우에 비해 반응 전환율과 생성물의 광학 순도는 급격히 향상되었다. 전통적 광학분할 반응의 최대 50%라는 전환율의 제한이 본 연구에서 찾은 DIAION WA30을 첨가함으로써 성공적으로 극복되었다. 또한 고체 염기촉매인 DIAION WA30의 사용은 라세미화 촉매의 회수 및 재사용이 가능하게 해준다.해준다.다. TN5 세포주를 0.2 L 규모 (1 L spinner flask)oJl에서 세포간의 응집현상 없이 부유배양에 적응,배양시킨 후 세포성장 시기에 따른 발현을 조사한 결과 1 MOI의 감염조건 하에서는 $0.6\times10^6$cell/mL의 early exponential시기의 세포밀도에서 72시간 배양하였을 대 최대 발현양을 나타내었다. 나타내었다. $\beta$4 integrin의