• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4
• /
• pp.14-22
• /
• 1998

본 연구에서는 Texas Instruments 사의 저가형 부동소수점 디지털 신호 처리기 (Digital Singnal Processor, DSP)인 TMS320C32를 이용하여 실시간 화자종속 음성인식 하 드웨어 모듈(VR32)을 개발하였다. 하드웨어 모듈의 구성은 40MHz의 TMS320C32 DSP, 14bit 코덱인 TLC32044(또는 8bit μ-law PCM 코덱), EPROM과 SRAM 등의 메모리와 호 스트 인터페이스를 위한 로직 회로로 이루어졌다. 뿐만 아니라 이 하드웨어 모듈을 PC사에 서 평가해보기 위한 PC 인터페이스용 보드 및 소프트웨어도 개발하였다. 음성인식 알고리 즘의 구성은 에너지와 ZCR을 기반으로 한 끝점검출(Endpoint Detection) 침 10차 가중 LPC 켑스터럼(Weighted LPC Cepstrum) 분석이 실시간으로 이루어지며 이후 Dynamic Time Warping(DTW)를 통하여 최고 유사 단어를 결정하고 다시 검증과정을 거쳐 최종 인식을 수행한다. 끝점검출의 경우 적응 문턱값(Adaptive threshold)을 이용하여 잡음에 강인한 끝 점검출이 가능하며 DTW 알고리즘의 경우 C 및 어셈블리를 이용한 최적화를 통하여 계산 속도를 대폭 개선하였다. 현재 인식률은 일반 사무실 환경에서 통상 단축다이얼 용도로 사 용할 수 있는 30 단어에 대하여 95% 이상으로 매우 높은 편이며, 특히 배경음악이나 자동 차 소음과 같은 잡음환경에서도 잘 동작한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.4
• /
• pp.38-48
• /
• 1982

Performance and realization of finite impulse response (FIR) digital filters that use an adaptive delta modulator (ADM) as an analog/digital converter have been studied. This filter requires no multiplication and offers many advantages over conventional PCM filters in low power consumption, small size, and cost effectiveness. Analytical formulas have been derived for the expected mean-squared errors and also for the word length necessary to achieve the desired performance. Computer simultation has been done to optimize the parameter values and to verify the results of performance analysis. In addition, design of FIR ADM digital filters for processing single and multi-channel signals has been considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.10
• /
• pp.1518-1526
• /
• 1993

It has been known that the amplifiers for high power signal in satellite communication channels suffer from nonlinear distortions, which reduce the performance of the communication channel significantly. In order to compensate the nonlinear distortion, a new data predistortion method with the LMS algorithm is proposed in this paper, Whereas the previous approach handles this problem by assigning corresponding predistorter to each symbol for the case of 16-QAM, the proposed approach uses the same memory for the symbols, which have identical amplitudes, and predistors the input of high-power amplifiers by the amplitude and phase differences, resulting in better adaptive data predistorter with small number of digital memory (3 predistorters) and fast convergence rate. Superiority of the proposed approach in the paper is demonstrated by comparing it with the previous approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.276-281
• /
• 2014

In this research, we describe a force feedback control for industrial robots has been proposed as a system which is suitable to work utilizing pressure sensitive alternative to human. Conventionally, polished surface of the workpiece are recognized, chamfer ridge, machining processes such as deburring, and it is most difficult to automate because of its complexity, has been largely dependent on the human. To aim to build automatic vacuum system robotic force control was gripping the grinding tool, the present study we examined the adaptability to the polishing process to understand the characteristics of the control system feedback signal obtained from the force sensor mainly. Furthermore, as a field, which holds the key to the commercialization, I went ahead with the application to robotic sweeping machine. As a result, the final sweeping utilizing a robot machine to obtain a very good grinded surface was revealed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.2015-2024
• /
• 1999

Presented in this paper are a new complex-umber filter architecture, which is suitable for an efficient implementation of baseband signal processing of digital communication systems, and a chip-set design of adaptive decision-feedback equalizer (ADFE) employing the proposed structure. The basic concept behind the approach proposed in this paper is to apply redundant binary (RB) arithmetic instead of conventional 2’s complement arithmetic in order to achieve an efficient realization of complex-number multiplication and accumulation. With the proposed way, an N-tap complex-number filter can be realized using 2N RB multipliers and 2N-2 RB adders, and each filter tap has its critical delay of $T_{m.RB}+T_{a.RB}$ (where $T_{m.RB}, T_{a.RB}$are delays of a RB multiplier and a RB adder, respectively), making the filter structure simple, as well as resulting in enhanced speed by means of reduced arithmetic operations. To demonstrate the proposed idea, a prototype ADFE chip-set, FFEM (Feed-Forward Equalizer Module) and DFEM (Decision-Feedback Equalizer Module) that can be cascaded to implement longer filter taps, has been designed. Each module is composed of two complex-number filter taps with their LMS coefficient update circuits, and contains about 26,000 gates. The chip-set was modeled and verified using COSSAP and VHDL, and synthesized using 0.8- μm SOG (Sea-Of-Gate) cell library.

• Journal of Advanced Navigation Technology
• /
• v.10 no.2
• /
• pp.173-180
• /
• 2006

An airborne radar is an essential aviation electronic system of the aircraft to perform various missions in all weather environments. This paper presents the design, development, and test results of the multi-mode pulsed Doppler radar system test model for helicopter-borne flight test. This radar system consists of 4 LRU units, which include ANTU(Antenna Unit), TRU(Tx Rx Unit), RSDU(Radar Signal & Data Processing Unit) and DISU(Display Unit). The developed technologies include the TACCAR processor, planar array antenna, TWTA transmitter, coherent I/Q detector, digital pulse compression, DSP based Doppler FFT filtering, adaptive CFAR, IMU, and tracking capability. The design performance of the developed radar system is verified through various helicopter-borne field tests including MTD (Moving Target Detector) capability for the Doppler compensation due to the moving platform motion.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.1 s.2
• /
• pp.75-84
• /
• 2003

Current techniques for road-traffic monitoring rely on sensors which have limited capabilities, are costly and disruptive to install. The use of video cameras coupled with computer vision techniques offers an attractive alternative to current sensors. Video based traffic monitoring systems are now being considered key points of advanced traffic management systems. In this paper, we propose the new method which extract the traffic information using video camera. The proposed method uses an adaptive updating scheme for background in order to reduce the false alarm rate due to various noises in images. also, the proposed extraction method of traffic information calculates the traffic volume ratio of vehicles passing through predefined detection area, which is defined by the length of profile occupied by cars over that of overall detection area. Then the ratio is used to define 8 different states of traffic and to interpret the state of vehicle flows. The proposed method is verified by an experiment using CCTV traffic data from urban area.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

Blocking and ringing artifacts continue to be the most serious defects that occur in images and video streams compressed to low bit rates using block-based discrete cosine transform(DCT) compression standards. These artifacts contain the high frequency components near the block and the edge boundaries. Usually the lowpass filter can remove them. However, simple lowpass filter results into blur by removing important information such as edges at the same time. To overcome these problems, we propose a novel postfiltering algorithm that calculate the weight value based on the intensity similarity in the neighboring pixels and multiply this weight to the Gaussian lowpass filter coefficient. Experimental results show that the proposed technique provides satisfactory performance in both objective and subjective image quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.10
• /
• pp.1483-1489
• /
• 2022

Recently, due to the influence of the 4th industrial revolution and the development of communication media, various digital video equipment are being used in industrial fields. Image data is easily damaged by noise in the process of acquiring and transmitting and receiving from the camera and sensor, and since the damaged image has a great effect on the processing of the system, noise removal is essential. In this paper, a weight filter algorithm using a weight graph is proposed to restoration images damaged by high-density impulse noise. The proposed algorithm obtains a weight graph using pixel values inside the filtering mask of the image, and restores the image by applying the final weight to the filtering mask. Simulation was conducted to analyze the noise removal performance of the proposed algorithm, and the magnified image and PSNR were used to compare with the existing method. The resulting image of the proposed algorithm showed excellent performance by removing high-density impulse noise.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.437-443
• /
• 2018

Activation of macrophages plays an important role in the host-immune system. In this study, we investigated the functional roles and related signaling mechanism of hot-water extracts of bee pollen (BPW) in RAW 264.7 macrophages. Since BPW did not exert cytotoxicity at concentrations ranging from 62.5 to $250{\mu}g/mL$ in macrophage cells, a concentration of $250{\mu}g/mL$ was used as the maximum dose of BPW throughout subsequent experiments. BPW increased inducible nitric oxide synthase-mediated nitric oxide production in a concentration-dependent manner. Additionally, BPW was found to induce macrophage activation by augmenting the expression of cell surface molecules (cluster of differentiation; CD80/86, and major histocompatibility complex; MHC class I/II) and production of pro-inflammatory cytokines (tumor necrosis $factor-{\alpha}$, interleukin-6, and $IL-1{\beta}$) through mitogen-activated protein kinase and nuclear $factor-{\kappa}B$ signaling pathways in RAW 264.7 macrophages. Taken together, our results indicate that BPW could potentially be used as an immunomodulatory agent.