• Journal of the Korean Chemical Society
• /
• v.50 no.2
• /
• pp.107-115
• /
• 2006

Complexes of Sn(II) with L1 = acac-o-phdnH2 [N,N'-o-phenylene bis(acetylacetoneimine)], L2 = acac-m-phdnH2 [N,N'-m-phenylene bis(acetylacetoneimine)] and L3 = acac-p-phdnH2 [N,N'-p-phenylene bis(acetylacetoneimine)] have been prepared and characterized by elemental analyses, vibrational, electronic spectra and thermal studies (TGA and DTA). Vibrational spectra indicated the coordination mode of imine and carbonyl oxygen for ligands giving (ONNO) that belong to C2V point group symmetry. The [Sn(L3)] complex has a maximum activation energy and [Sn(L2)] complex has a minimum activation energy.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.106-110
• /
• 2023

Lignin is compatible with various polymeric materials and useful as a carbon precursor. In this work, carbon monolith films were produced from polyacrylonitrile (PAN)@lignin precursor films by a controlled carbonization cycle. In addition, their morphological features, electrical properties, and adsorption behavior were analyzed and compared with those of carbonized PAN films. The successful formation of PAN@lignin precursor was confirmed by Fourier-transform infrared (FT-IR) spectroscopy. SEM was used to examine the morphology of precursor and carbonized films, revealing that both precursor and carbonized films retained structural stability following carbonization. A trace of lignin in the carbonized films was also found. The pore structure of the carbonized PAN@lignin film was measured using the BET method, indicating the formation of fairly uniform pores. The electrical properties were also analyzed to obtain the Ohmic relation, which demonstrated that the electrical signal was influenced by incoming materials. Finally, the carbonized PAN@lignin films were useful as adsorbents to remove metal ions. This study provides important information for future initiatives in relevant research fields.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.115-124
• /
• 2007

A series of α, β-unsaturated ketones are synthesized by Crossed - Aldol condensation reaction, from ecofriendly 6-methoxy-2-naphthyl ketones and substituted benzaldehydes under solvent free conditions using silica-sulfuric acid as a catalytic reagent. The yields of ketones are more than 90% and the catalyst was reusable for further run. There is no appreciable decrease in the yield of product and the activity of catalyst. These chalcones were characterized by their physical constants and spectral data (IR, 1H-, 13C-NMR and Mass). These spectral data are subjected to correlate various Hammett substituent constants with single and multiparameter correlation equations. From the results of statistical analysis the influence of electronic effects of substituents on the spectral data of the ketones were explained.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1127-1130
• /
• 2010

본 연구에서는 CNT의 분산성을 개선하고자 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWNT)에 butyllithium solution 및 hexyllithium solution을 이용하여 표면을 화학적으로 개질하였다. 개질된 MWNT는 적외선 분광 분석 및 Raman spectrophotometer를 이용하여 MWNT에 작용기가 도입되었는지를 확인하였다. 또한, 열중량분석기(Thermogravimetric analysis, TGA)를 이용하여 작용기가 도입된 MWNT의 열적 성질을 측정하였으며, MWNT 및 개질된 MWNT를 다양한 용매에 따른 분산성을 확인하였다.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.648-658
• /
• 2021

In this study, we aimed to analyze the chemical changes that occur in Korean paper in an accelerated deterioration environment of 105℃. We selected the Korean paper produced with different types of cooking agents (plant lye, Na₂CO₃) and during different manufacturing seasons (winter, summer). The degree of deterioration of the Korean paper was confirmed by measuring the brightness, yellowness, and pH level, and the degree of change in each vibrational region of cellulose as deterioration progressed through infrared (FT-IR) spectroscopy. The FT-IR analysis showed that, as deterioration progressed, the absorbance of the amorphous region in cellulose decreased, whereas the absorbance of the crystalline region slightly increased. X-Ray diffraction (XRD) analysis and Raman spectroscopy were performed to verify the changes in the crystalline and amorphous regions in cellulose indicated by the FT-IR results. Furthermore, the crystallinity index (CI) was calculated; it showed a slight increase after deterioration; therefore, CI was confirmed to follow the same trend as that observed for absorbance in the FT-IR results. In addition, as a result of Raman spectroscopic analysis, the degree of decomposition of the amorphous region in the cellulose under the manufacturing conditions was confirmed by the fluorescence measured after the deterioration.

• Clean Technology
• /
• v.20 no.2
• /
• pp.103-107
• /
• 2014

Acrylic acid is a commodity chemical which is applicable for various industries such as polymer and textile industry. Currently, it has been produced by chemical synthesis from petroleum. However, due to the high price of petroleum and global $CO_2$ emission, renewable materials such as sugar are interesting alternative carbon sources for the biological production of acrylic acid. For an economic production of acrylic acid from renewable carbon sources, a cost effective separation process for acrylic acid should be needed. In this study, reactive extraction by TOA (tri-n-octylamine) was used for the recovery of acrylic acid from its aqueous solutions. The effects of polarity of diluents and concentration of TOA on extraction equilibrium were investigated. The extraction efficiency was proportional to concentration of TOA and polarity of diluents and its value was more than 95% in the case of sufficient concentration of TOA. From IR spectroscopy, it was concluded that the ratio of (1,1) acid-amine complex was increased and the ratio of acid dimer was decreased with concentration of TOA. Equilibrium model based on IR spectroscopy was well fitted with experimental data.

• Electronics and Telecommunications Trends
• /
• v.27 no.5
• /
• pp.73-84
• /
• 2012

테라헤르츠파는 0.1~10THz 대역의 미개발 주파수 자원으로 전자기파 스펙트럼에서 적외선과 밀리미터파의 중간 영역에 위치한다. 전파의 투과성과 광파의 직진성을 동시에 가지고 있어 독특한 물리적 특성을 보유한 테라헤르츠파는 THz 소자, 분광, 영상 기술 등의 기초 과학과 의공학, 보안, 환경/우주, 정보통신 등의 응용 과학 분야에서 이미 그 중요성이 검증되어 향후 폭넓은 산업 응용으로 다양한 분야에서 새로운 형태의 시장이 형성될 것으로 기대된다. 이러한 테라헤르츠파 기술의 사회, 경제적 파급력을 극대화하기 위해서는 테라헤르츠 대역 소자의 특성을 향상시키고, 크기와 가격을 낮추는 것이 매우 중요하다. 본고에서는 크기와 가격을 낮출 수 있는 포토닉스 기반의 테라헤르츠 가변형 연속파 신호원 및 검출기 기술과 이를 기반으로 구현 가능한 응용 기술 동향에 대하여 기술하였다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.25-25
• /
• 2012

농업용 비닐하우스에 사용되는 EVA (ethylene-vinylacetate copolymer)고분자 필름의 무적성을 향상시킬 목적으로 EVA 및 PVAc (polyvinylacetate)필름을 가성소다 용액으로 가수분해하여 친수성을 검토하였다. EVA는 분말상의 고분자를 프레스로 압착하여 필름으로 성형하였으며, PVAc는 아세톤에 용해한 후에 필름으로 성형하였다. 가수분해에 따른 필름의 구조변화는 적외선 분광분석으로, 친수성 변화는 접촉각으로 평가하였다. 가수분해 시간이 증가함에 따라 친수성이 증가하였다. 이는 가수분해에 의해 소수성인 아세테이트기가 친수성인 수산기로 변했기 때문으로 생각되었다. 한편, 가수분해시킨 EVA 및 PVAc를 사용하여 프레스로 압착하여 제조한 필름에서는 친수성이 그다지 크게 증가하지 않았다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.265-271
• /
• 2002

Density, water resistance, Raman and infrared spectroscopy were used to investigate the change of structural characteristics with the composition of phosphate galss samples made by melting method. The structural abnormality of the density and water resistance were rapidly increased and shown near the 60mol% of $P_2O_5$. This result could be explained by the structural changes owing to the strong shrinkage of glass network by the coordination of DBO(Double-Bonded Oxygen) around $Mg^{2+}$ cations. In addition, it seems that the DBOs coordinating $Mg^{2+}$ cations lose its characteristics of double bonding and resonate with other NBOs(Non-Bonding Oxygen).

• Composites Research
• /
• v.24 no.1
• /
• pp.31-36
• /
• 2011

Adhesive shear strengths of the established adhesives and the alternative adhesives were evaluated and their chemical structures were analyzed in order to investigate the possibility of replacing the established adhesives with the alternative adhesives applicable to the seeker for the guided missiles. Two types of the adhesives such as the structural adhesives and the sealant adhesives were considered. Those adhesives were exposed to the combined environmental factors consisting of temperature, moisture and ultraviolet over 1000 hours. Adhesive shear test was conducted to evaluate adhesive shear strengths and ATR FT-IR was utilized to investigate chemical structures. According to the results, the adhesive shear strengths of the alternative adhesives revealed higher than those of the established adhesives. Also the alternative adhesives were more stable to the combined environmental condition than the established adhesives. Therefore, it is found that the established adhesives were able to be replaced by the alternative adhesives.