• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.49-49
• /
• 2010

본 논문은 진공챔버 내부에서 위성 표면의 온도를 제어하기 위한 할로겐램프를 이용한 적외선 발열장치의 개발에 관한 것으로, 인공위성이 우주궤도에서 받게 되는 복사에너지를 지상의 진공챔버 내에서 모사하기 위한 비접촉 적외선 발열장치에 관한 것이다. 진공챔버 내에서의 비접촉식 발열 방법 중, 진공환경에서의 오염을 발생시키지 않고, 발열 시간 및 냉각 시간이 가장 짧으며, 높은 열효율로 태양복사에너지를 가장 근사하게 모사할 수 있는 할로겐 램프를 이용한 발열 방법을 적용하였으며, 램프에서 방사되는 열에너지가 위성표면에 균일하게 분포될 수 있도록 위성 표면으로부터의 거리와 램프의 개수, 램프의 배열에 따른 에너지 분포 계산식을 도출하여 적용하였다. 공급 전압에 따른 램프의 저항특성을 파악하여, 원격으로 제어되는 150 VDC, 5 A의 직류전원공급기를 이용해 램프의 발열량을 조절하였으며, 발열량에 따른 위성 표면온도에 대한 해석을 수행하였다. 램프를 이용한 비접촉식 적외선 발열장치 개발을 통해 진공환경에서의 시험대상에 대한 효율적인 열에너지 부과방법 수립이 가능하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.1
• /
• pp.12-19
• /
• 2012

This study conducted infrared (IR) thermography tests using pipe and plate specimens with artificial wall-thinning defects to find an optimal condition for IR thermography test on the wall-thinned nuclear piping components. In the experiment halogen lamp was used to heat the specimens. The distance between the specimen and the lamp and the intensity of halogen lamp were regarded as experimental parameter. When the distance was set to 1~2 m and the lamp intensity was above 60 % of full power, a single scanning of IR thermography detected all artificial wall-thinning defects, whose minimum dimension was $2{\Theta}=90^{\circ}$, d/t=0.5, and $L/D_o=0.25$, within the pipe of 500 mm in length. Regardless of the distance between the specimen and the lamp, the image of wall-thinning defect in IR thermography became distinctive as the intensity of halogen lamp increased. The detectability of IR thermography was similar for both plate and pipe specimens, but the optimal test condition for IR thermography depended on the type of specimen.

• Journal of Oral Medicine and Pain
• /
• v.31 no.1
• /
• pp.47-57
• /
• 2006

The purpose of this study was to assess the effects of the superficial heat therapy on the cutaneous blood flow and the skin temperature at pre-auricular region. Two types of the superficial heat therapy-moist hot pack & infrared lamp- were applied to 20 healthy subjects(male: 10, female: 10). For each subject, the two parameters of cutaneous blood flow and skin temperature were measured before and after heat therapy, using laser doppler flowmetry(LDF). The author analyzed the differences of the effects between the two therapies and also characteristics of responsiveness between the two parameters. The results were as follows : 1. The two parameters were significantly increased after both superficial heat therapies. 2. Skin temperature showed a maximum peak immediately after both superficial heat therapies, but cutaneous blood flow showed a maximum peak 4 minutes after both superficial heat therapies. 3. Increased cutaneous blood flow after application of moist hot pack lasted longer than infrared lamp. 4. Increased skin temperature after both superficial heat therapies lasted for 60 minutes, but increased skin temperature after infrared lamp decreased more rapidly than moist hot pack. 5. Amount of changes in cutaneous blood flow after infrared lamp was larger in female than in male, but no significant gender difference was found since 20 minutes after infrared lamp. Both moist hot pack and infrared lamp showed favorable effectiveness in raising cutaneous blood flow and skin temperature. Moist hot pack was slightly superior in maintaining this effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.45-50
• /
• 2013

The reflector of infrared lamp is designed to the optimal circular shape through the analyses of lumination distributions with a triangular, rectangular and circular configurations of infrared lamps respectively by using Photopia. PLC is used to compare and amplify the difference between soldering temperature profile and feedback value. It is fed to IR lamp controller which adjusts the soldering temperature of PV cell. The soldering temperature measured using an infrared temperature sensor is then fed back to the PLC. The closed control loop of soldering temperature on a PV cell is implemented. The noncontact soldering device of PV cells using infrared lamp which is easily operated by HMI operation panel and controlled robustly by PLC and IR lamp controller is developed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.10 no.3
• /
• pp.53-59
• /
• 2006

This paper presents the IR-Lamp test results of evaluating heat protection performance and measuring of mechanical/thermal properties in the heat protection material of missile external surface. The results showed that increasing the contents of microballoons improved the heat protection performance, but the mechanical properties were deteriorated. Among the kinds of microballoons, Epoxy/Phenolic Microballoons mixture showed the best mechanical properties and low thermal conductivity. Epoxy/Cork mixture showed the best heat protection in the IR-Lamp test, though it has low mechanical properties and high thermal conductivity.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.178-180
• /
• 2006

광은 식물의 광합성 작용뿐만 아니라 조직이나 기관의 분화, 종자의 발달 등 식물의 형태형성에도 관여하는 중요한 요인 중 하나이다. 불량한 광환경조건 하에서는 작물의 생육부진 뿐만 아니라 다양한 생리장해 및 병발생 등을 유발하기 때문에 경제적으로 광효율을 증가시키기 위하여 적절한 시설구조를 채택해야 한다. 또한 작물의 생육과 품질을 향상시키기 위하여 보광 및 차광 등 광환경 관리기술 개발이 요구된다. 본 연구에서 도입한 적외선램프는 새로운 인공광원으로서 태양광과 80% 정도 유사하고 용도에 따라 근적외선, 중적외선 및 원적외선이 방사되도록 할 수 있으며, 적은 전력소모량과 발생되는 열원은 겨울철 온풍난방기를 보조하거나 대체할 수 있어 에너지 절감효과를 동시에 기대할 수 있다. 따라서 본 연구는 인공광원에 대한 기초연구로서 인공광원의 종류별 분광특성을 비교 분석하고, 일몰 후 적외선램프의 조사 시간이 배추와 상추 유묘의 생장에 미치는 영향을 구명하고자 실시하였다.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

At this time, digital cameras are used in art and forensic science. However, the digital camera has some limitations which need to understand of photograph and lighting. It is a useful paper to make an infrared flatbed scanner. The following processes offer an infrared flatbed scanner development. First, the infrared flatbed scanner changes visible fluorescent lamp to infrared LED. Second, it equips a long-pass filter, which is available to pass over 810nm wavelength, on the glass to complete the optimal infrared flatbed scanner. In addition, it must copy from digital camera to computer directly. The infrared digital camera has disadvantage to always irradiate infrared lamp. Because of difference between visible length and infrared length characteristic, they have different focal distance. This devised scanner for solving mentioned problems does not need to irradiate infrared lamp, and there is not a problem about focal point because the depth of field of flatbed scanner is minimum 2mm. Lastly, the infrared flatbed scanner can make high resolution which is 12,800dpi unlike digital camera. Accordingly, the infrared scanner looks forward to be used in many field of study.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.8
• /
• pp.528-533
• /
• 2014

Recently, people interest in environmental pollution and attempt to improve the indoor air quality contaminated with various pollutants since it is very important to construct healthy and comfortable living environment. In the current study, we used the technology that has first received the certification of green technology for improving the removal efficiency of malodor causing substances. This green technology is a new technology to increase the reactivity of the odorous substances with OH radicals for oxidation reaction by using an infrared lamp in the existing air purification system. Comparing the efficiency of the green technology with the infrared lamp to that of the existing technology of air cleaner, there was a difference in the decomposition efficiency depending on the initial concentrations and speciation of the odorous substances. The removal efficiencies of contaminants were enhanced by 16.9 and 13.2% at low and high concentrations, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.304-304
• /
• 2009

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.329-336
• /
• 2022

Unreadable Khitan scripts of ancient documents written by indian ink on parchment(sheepskin) are visualized by active infrared thermography without contacting and damaging the document which are deteriorated and aged presumably over many years. Sinusoidal infrared thermal wave using Halogen lamp is applied to the surface of the document in order to selectively magnify and record the thermal response of indian ink. The infrared image of the document captured in real time by infrared camera under the active external excitation shows the better sharpness and readability of Khitan characters than the optical image, from which many Khitan letters like ' ' and ' ' sounding as 'd' and 'ri' in English alphabet are detected and deciphered. It is concluded from the experiment that the active infrared thermography can be used as a promising method for digital reconstruction and preservation of ancient documents in the future.