• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.291-298
• /
• 2020

ZITO/Ag/ZITO multilayer transparent electrodes at room temperature on glass substrates were prepared using RF/DC magnetron sputtering. Transparent conductive films with a sheet resistance of 9.4 Ω/㎡ and a transmittance of 83.2% at 550 nm were obtained for the multilayer structure comprising ZITO/Ag/ZITO (100/8/42 nm). The sheet resistance and transmittance of ZITO/Ag/ZITO multilayer films meant that they would be highly applicable for use in polymer-dispersed liquid crystal (PDLC)-based smart windows due to the ability to effectively block infrared rays (heat rays) and thereby act as an energy-saving smart glass. Effects of the thickness of the PDLC layer and the intensity of ultraviolet light (UV) on electro-optical properties, photopolymerization kinetics, and morphologies of difunctional urethane acrylate-based PDLC systems were investigated using new transparent conducting electrodes. A PDLC cell photo-cured using UV at an intensity of 2.0 mW/c㎡ with a 15 ㎛-thick PDLC layer showed outstanding off-state opacity, good on-state transmittance, and favorable driving voltage. Also, the PDLC-based smart window optimized in this study formed liquid crystal droplets with a favorable microstructure, having an average size range of 2~5 ㎛ for scattering light efficiently, which could contribute to its superior final performance.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.309.1-309.1
• /
• 2014

III-N계 기반의 광 반도체는 직접 천이형 넓은 밴드갭 구조를 갖고 있기 때문에 자외선에서 가시광을 포함한 적외선까지 포함한 폭 넓은 발광이 가능하여 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있다. 하지만 p형 GaN의 경우, 상온에서 도펀트로 사용되는 마그네슘(Mg)이 수소(H)와 결합하여 보상 효과를 나타내기 때문에 높은 정공농도를 갖기에 어려움이 있다고 알려져 있다. 따라서, 대부분의 연구 그룹에서는 GaN계 LED 소자를 성장 후 rapid thermal annealing 공정이 요구되고 있고, 최근에는 박막 성장 후 반응로 내에서 자체적으로 열처리를 진행하고 있는 실정이다. 하지만, 열처리 조건은 LED 소자의 발광특성에 큰 영향을 주기 때문에 본 연구에서는 반응로에서 열처리가 된 LED 샘플에 대해 추가적인 열처리 공정의 유무에 따른 GaN계 LED소자의 광학적 및 전기적 특성에 대해 알아보고자 하였다. 금속유기화학증착법을 이용하여 c-면 사파이어 기판에 저온 GaN 완충층 및 $2.0{\mu}m$두께의 GaN 박막을 성장한 후, $3.0{\mu}m$두께의 n-형 GaN에피층과 InGaN/GaN 5주기의 양자우물구조를 형성하고 $0.1{\mu}m$두께의 p형 GaN층을 성장하였다. P-형 GaN층 성장 후 온도를 내리면서 $750^{\circ}C$, N2 분위기에서 5분간 Mg 활성화를 위한 열처리를 반응로에서 in-situ로 진행하였다. 그 후 급속열처리 장비에 장입하여 $650^{\circ}C$, N2 분위기에서 5분간 추가적인 열처리를 진행하여 추가 열처리 유무에 따른 LED소자의 특성을 분석하였다. 추가적인 열처리 유무에 따른 LED소자의 레이저 여기에 의한 포토루미네선스 스펙트럼과 전계발광 스펙트럼을 조사한 바, 포토루미네선스 스펙트럼의 경우 추가적인 열처리를 진행하였을 경우, 이전보다 발광 세기가 감소함을 나타내었다. 이는 추가적인 열처리에 의해 InGaN/GaN 활성층이 손상되었기 때문이라고 추측된다. 그러나 전계발광 스펙트럼에서는 활성층이 손상되었음에도 불구하고 전계 발광세기가 3배 가량 증가한 것을 확인할 수 있었다. 또한, 20 mA 인가 시 4.2 V 에서 3.7 V로 전압이 감소하였다. 상기 결과로 미루어 볼 때 열처리에 의한 InGaN/GaN 활성층 손상에도 불구하고 광 세기가 크게 증가한 것은 금속유기화학증착장치의 in-situ 열처리에 의한 Mg가 충분히 활성화되지 못하였고, 추가적인 열처리에 의하여 p형 GaN에서 Mg-H 복합체의 분리로 인한 Mg 활성화가 더욱더 효과적으로 이루어졌기 때문이라고 추측된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.101-112
• /
• 2015

II~VI compound semiconductors, $Zn_xCd_{1-x}S$ thin films have been synthesized onto indium-tin-oxide(ITO) coated glass substrates using thermal evaporation technique. The composition ratio x($0{\leq}x{\leq}1$) was varied to fabricate different kinds of $Zn_xCd_{1-x}S$ thin films including CdS(x=0) and ZnS(x=1) thin films. Then, the deposited thin films were thermally annealed at $400^{\circ}C$ to enhance their crystallinity. The chemical composition and electronic structure of films were investigated by using X-ray photoelectron spectroscopy(XPS). The optical energy gaps of the samples were determined by ultra violet-visible-near infrared(UV-Vis-NIR) spectroscopy and were found to vary in the range of 2.44 to 3.98 eV when x changes from 0 to 1. Finally, we measured the THz characteristics of the $Zn_xCd_{1-x}S$ thin films using THz-TDS(time domain spectroscopy) system to identify the capability for electronic and optical devices in THz region.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.455-460
• /
• 2004

We have developed a mode-locked ultra-short pulse C $r^{4+}$:YAG laser, as well as a continuous wave C $r^{4+}$:YAG laser. The laser was pumped by a Nd:YAG laser and its characteristics were investigated. In continuous wave mode, we obtained as much as 600 mW at 1.436 ${\mu}{\textrm}{m}$ with pumping power of 6 W, by using an output coupler with a reflectivity of 98%. The power slope efficiency was 10%, when the gain medium was cooled to 19$^{\circ}C$. The tuning range was varied from 1.39 ${\mu}{\textrm}{m}$ to 1.55 ${\mu}{\textrm}{m}$ and the maximum power was 400 mW at 1.492 ${\mu}{\textrm}{m}$ with a 3-plate birefringent filter. The C $r^{4+}$:YAG laser was mode-locked by a Kerr lens mode locking method. Mode locking at 1.436 ${\mu}{\textrm}{m}$was initiated by slightly rocking a mirror mount. But the pulses were very unstable because of the strong water absorption at this region. So we shifted the lasing wavelength to 1.492 ${\mu}{\textrm}{m}$ by using a 3-plate birefringent filter. Then we obtained stable state mode-locking with the maximum average power of 280 mW for a pumping power of 6 W. The pulse width of 43 fs was measured using an autocorrelator and the repetition rate was 104.5 MHz.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.54-59
• /
• 2008

We report on the measurements of absorption spectra from acetylene ($^{12}C_2H_2$) and hydrogen cyanide ($H^{13}C^{14}N$) for wavelength reference in the C-band (conventional band) region using a supercontinuum optical source generated from a mode-locked $Cr^{4+}$:YAG laser. The center wavelength of the mode-locked $Cr^{4+}$:YAG laser was 1510 nm and the pulse duration was 75 fs at 100 MHz repetition rate. The supercontinuum source achieved a flatness of ${\pm}5dB$ over a wavelength range of more than 400 nm, using a 20 m long photonic crystal fiber. The measured absorption spectra from acetylene ($^{12}C_2H_2$) and hydrogen cyanide ($H^{13}C^{14}N$) had more than 50 lines and were analyzed for wavelength standardization.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.209-216
• /
• 2005

A new second generation advanced thermal imager, which can be used for battle tank sight has been developed by ADD. This system uses a $480\times6$ TDI HgCdTe detector, operating in the $7.7-10.3{\mu}m$ wavelength made by Sofradir. The IR optics has dual field of views such as $2.67\times2^{\circ}$ in NFOV and $10\times7.5^{\circ}$ in WFOV. And also, this optics is used for athermalization of the system. It is certain that our sensor can be used in wide temperature range without any degradation of the system performance. The scanning system to be able to display 470,000 pixels is developed so that the pixel number is greatly increased comparing with the first generation thermal imaging system. In order to correct non-uniformity of detector arrays, the two point correction method has been developed by using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we have proposed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained the highest quality thermal image. The MRTD of the LWIR thermal sight shows good results below 0.05K at spatial frequency 2 cycles/mrad at the narrow field of view.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.3
• /
• pp.45-50
• /
• 2008

Purpose: A soft contact lens was manufactured by adding naringin known as natural anti-bacterial material to resin solution. With solution eluted from manufactured contact lens, we examined its optical properties, physical and chemical states of naringin in the polymer, and elution properties. Methods: The soft contact lens with naringin was synthesized by bulk polymerization method. IR spectrum and HPLC were used to define the bonding type of naringin itself in the soft contact lens contained naringin, elution process of naringin to the saline solution, and the amount of naringin solution eluted from the lens with elapsed time. Results: Naringin was continuously eluted with constant concentration from the soft contact lens for about a month and the structure ofnaringin which is eluted was as same as before it was added to resin solution. Any change in optical properties such as transmittance couldn't be found. Bonding state and the structure of naringin in contact lens were explained with IR spectrum and HPLC results. Conclusions: In the contact lens with naringin, naringin remained in the contact lens bonding with weak hydrogen bonding and/or van der Waals force between naringin and polymer. Naringin was continuously eluted from the contact lens contained naringin during about 1 month. Even after 1 month, it showed that the concentration of the naringin eluted was approximately 10 ppm in a day. From the results, adding naringin to the soft contact lens resin is very effective method for manufacturing the soft contact lens which has anti-bacterial function for a period of time.

• Korean Journal of Remote Sensing
• /
• v.21 no.4
• /
• pp.273-285
• /
• 2005

This study has investigated the suitable wavelength for detecting biomass burning aerosols. We have performed the analysis of the wavelength at 380nm in near-UV, 400nm, 412nm, 460nm, and 490nm in visible, and 2100nm in shortwave infrared regions from the Global Imager measurements. It is well known that the UV bands have the advantage of the aerosols retrieval due to the low surface reflectance and a weak effect of Bidirectional Reflectivity Distribution Function. However, the pure surface reflectances of shortwave visible bands, except 412nm, are as low as that of 380nm in near-UV over northeast Asia. In order to detect the aerosol signal, we have retrieved the aerosol reflectance as a function of wavelength based on the surface reflectivity contrast method for the period of May 2003. It is interesting that the retrieved aerosol reflectance with 460nm is slightly more sensitive than that with 380nm. Additionally, we have applied the TOMS aerosol index method to determine the best pair for biomass burning aerosols and found that the pair of 380 and 460nm results in the best signal for retrieving aerosols.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.50-57
• /
• 2022

Ti-In-Zn-O (TIZO)/Ag/TIZO multilayer transparent electrodes were prepared on glass substrates at room temperature using RF/DC magnetron sputtering. Obtained multilayer structure comprising TIZO/Ag/TIZO (10 nm/10 nm/40 nm) with the total thickness of 60 nm showed a transmittance of 86.5% at 650 nm and a sheet resistance of 8.1 Ω/□. The multilayer films were expected to be applicable for use in energy-saving smart window based on polymer-dispersed liquid crystal (PDLC) because of their transmittance properties to effectively block infrared rays (heat rays). We investigated the effects of the content ratio of prepolymer, the thickness of the PDLC coating layer, and the ultraviolet (UV) light intensity on electro-optical properties, and the surface morphology of polyester acrylate-based PDLC systems using new TIZO/Ag/TIZO transparent conducting electrodes. A PDLC cell with a thickness of 15 ㎛ PDLC layer photocured at an UV intensity of 1.5 mW/cm² exhibited good driving voltage, favorable on-state transmittance, and excellent off-haze. The LC droplets formed on the surface of the polymer matrix of the PDLC composite had a size range of 1 to 3 ㎛ capable of efficiently scattering incident light. Also, the PDLC-based smart window manufactured using TIZO/Ag/TIZO multi-layered transparent electrodes in this study exhibited a light brown, which will have an advantage in terms of aesthetics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.219-224
• /
• 2022

CaF₂ single crystal has a large band gap (12 eV), and it is used for optical windows, prisms, and lenses due to its excellent transmittance in a wide wavelength range and low refractive index. Moreover, it is expected to be one of the materials for ultraviolet transmissive laser optical components. CaF₂ belongs to the fluoride compounds and has a face-centered cubic (FCC) structure with three sub-lattices. The representative method for CaF₂ single crystal growth is Czochralski, which method has the advantages of high production efficiency and the ability to make large crystals. In this study, X-ray diffraction (XRD), X-ray rocking curves (XRC) measurement, and chemical etching were performed to analyze the crystallinity and defect density of the CaF₂ single crystals, grown by the Czochralski method. Fourier-transform infrared spectroscopy (FT-IR) and UV-VIS-NIR spectroscopy systems were used to investigate the optical properties of the CaF₂ crystal. The provability of various applications, including UV application, was systematically investigated with various analysis results.