• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.79-86
• /
• 2006

This paper studies the sensitivity analysis of an infrared rays (IR) sensor (SHARP-GD2D12) with bluetooth communication. To evaluate the performance of the IR sensor-bluetooth module, the distance and angle data between the sensor and the fixed object are measured with an IR sensor and the measured data are transferred to PC via bluetooth within 100 meters. This experiment shows that the IR sensor-bluetooth system can be used to measure the distance and angle for a fixed object within 100 meters.

• Journal of Internet Computing and Services
• /
• v.14 no.2
• /
• pp.45-51
• /
• 2013

In this paper, the combination of ultraviolet and infrared sensors based design for flame signal detection algorithms was proposed with the application of light-wavelength from burning. And, the performance result of image detection was compared by an ultraviolet sensor, an infrared sensor, and the proposed dual-mode sensors(combination of ultraviolet and infrared sensors).

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.205-215
• /
• 2011

Films are sensitive to ultraviolet rays and in contrast, digital camera sensors are extremely sensitive to infrared rays due to the differences in spectral characteristics. As a result, all digital cameras that use CCD or CMOS are equipped with IR Cut-Off Filter on the overall sensor. Complete block out of infrared rays is ideal, but the actual experiment results showed that infrared rays were not being blocked out completely. Infrared permeability was also different for each camera. Therefore, this study aims to analyze the effect of the minute quantities of infrared rays, which get transmitted due to mechanical properties of IR Cut-Off Filters that are installed on digital cameras, on digital picture images. The results obtained by carrying out a comparative analysis of a UV Filter (infrared transmitting state) and a UV-IR Filter (infrared blocked out state) are as follows. It was confirmed that the minute quantities of infrared rays do affect dynamic range and resolution to some extent, despite the little or no difference in noise and color reproduction.

• Journal of Digital Contents Society
• /
• v.13 no.3
• /
• pp.271-278
• /
• 2012

Recently, infrared (IR)-based depth sensors have proliferated as consumer electronics thanks to decreased price, which led to various applications including gesture recognition in television virtual studios. However, the depth sensors fail to capture depth information correctly under strong light conditions emitting infrared light which are very common in television studios. This paper analyzes the mechanism of such interference between the depth sensors relying on certain IR frequencies and infrared light emitting sources, and provides methods to get correct depth information by applying filters. Also, it describes experiment methods and presents the results of applying multiple combinations of filters with different cut-off frequencies. Finally, it proves that the interference due to IR can be filtered out using proposed filtering method practically by experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.240-245
• /
• 2013

Each pixel of InfraRed(IR) sensor differently responds to IR light as time elapses or the sensor on/off operation is repeated. As a result, the quality of IR sensor image is deteriorated, and therefore NUC(Non-uniformity Correction) is periodically needed for IR sensor. In this paper, in order to perform NUC in the Satellite, on-board V-grooved blackbody is designed with a baffle so that the emissivity of black body is to be higher than 0.995 as well as the temperature deviation is less than $1^{\circ}C$ in the range of the infrared wave length from 3.3 to $5.2{\mu}m$. To check its performance, the emissivity and the surface temperature of the blackbody by TRT(Transfer Reference Thermometer) and IR Micrometer scanner are measured, respectively. From the results, black body design is verified and the uncertainty of NUC is estimated through the measurement results.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.432-435
• /
• 2009

This paper proposes a hand posture recognition with pattern-matching method, embedding a simple paradigm using an Infrared sensor array. Our pattern-matching based hand posture recognition is specification supports fun and the user experience when communicating between humans and telecommunication devices, including robots. Our non-contact type input device (IR-Sensor Array) transmits commands to control mobile robots. It can also control Google Earth’s map searching programs, and other applications.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.191-197
• /
• 2013

In this paper, we implemented a paper currency recognition system using IR(infrared) sensor. The system has 32 channel IR sensor to measure the reflection and penetration quantity of light. The IR image of paper currency of 10-bit gray scale is used to differentiate the real and counterfeit paper currency with image information from 0 to 4095. The characteristics of IR image are recognized by brightness and darkness and the positions of bright and dark portions are different between real and counterfeit paper currency. The price of IR sensors were relatively high, however, it is good price in these days due to mass production to apply to counterfeit detection area. We used a software table having the IR characteristics of real paper currency to compare with the IR images of the input paper currency. The performance of the implemented system shows 1-2% error rates for Euro real paper currency and 0% error rates for various counterfeit paper currencies of several countries.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.870-878
• /
• 2012

Recently, very rapid development of computer and sensor technologies induces various kinds of user interface (UI) technologies based on user experience (UX). In this study, we investigate and develop a smart touch projector system technology on the basis of IR sensor and image processing. In the proposed system, a user can control computer by understanding the control events based on gesture of IR pen as an input device. In the IR image, we extract the movement (or gesture) of the devised pen and track it for recognizing gesture pattern. Also, to correct the error between the coordinate of input image sensor and display device (projector), we propose a coordinate correction algorithm to improve the accuracy of operation. Through this system technology as the next generation human-computer interaction, we can control the events of the equipped computer on the projected image screen without manipulating the computer directly.

• Journal of Sensor Science and Technology
• /
• v.30 no.1
• /
• pp.36-41
• /
• 2021

The motivation of this paper is to easily analyze the properties of nondispersive infrared gas sensor that has more than two different optical path length and to suggest the criterion and definition of infrared light absorbance in order to minimize the measurement errors. With the output voltage ratios and the normalized derivatives of infrared ray (IR) absorbance, when the normalized derivatives of IR absorbance decreases from 0.28 to 0.10, the lower and higher limits of errors were decreased from -5.62% and 2.39% to -4.27% and 2.78%. When the normalized derivatives of IR absorbance were 0.10, the output voltage could be partitioned into two regions with one exponential equation and the temperature compensation error was less than 5%.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.359-362
• /
• 2001

본 논문에서는 광학센서와 적외선 센서를 사용하는 Multi-sensor 시스템에서 영상 정보를 통한 물체의 추적 및 인식에 필요한 영상을 분리하는데 필요한 전처리와 object 기반의 추적 방법을 제안하였다. 일반적인 추적 알고리즘의 목표는 consistency를 유지하는데 있다. 그러나 인식에 필요한 영상을 분리하기 위해서는 물체의 범위를 정확히 판단 할 수 있는 능력이 중요하다. 이를 위해 CCD와 IR영상에 동시에 적용 가능한 전처리 기법과 object 기반의 two-step 추적 알고리즘을 통해 consistency외에도, 물체의 범위를 estimation하여 인식에 필요한 범위를 분리해 낸다. 본 논문에서는 ITS 의 ETCS application을 위해 이종 센서인 CCD와 IR의 야간 차량 영상정보를 이용하여 알고리즘을 test 하였다.