• 설비공학논문집
• /
• 제17권11호
• /
• pp.1072-1078
• /
• 2005

The present study has been conducted to tune a PID controller for large thermal systems such as a thermal environment chamber. In spite of large thermal mass of the thermal chamber under test, its response delay time was found to be negligible mainly due to high air recirculation rate. In general, heating and cooling capacities tend to be small compared the size of a thermal environment chamber, which leads to long transient periods of one hour or so. In the study, a PI tuning method is suggested which makes system responses faster while reducing overshoots and hunting by utilizing efficiently proportional band of actuators.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.318-322
• /
• 1996

This paper presents a technique to control a robot which has a flexible manipulator moving in a vertical plane. The flexible manipulator is modeled as an Euler-Bernoulli beam. Elastic deformation is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID control technique. The proportional, integral and derivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and having a short settling time. The effectiveness of the developed control scheme is showed experimentally. In the position control experiment, three different end masses are used. The experimental results shows little overshoot, no steady state error, and less than 2.5 second settling time in case of having an end mass which is equivalent to 45% of the total system weight. Also the residual vibration of the end point is effectively controlled.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.155-163
• /
• 2005

Pressure heating rollers with temperature control were mounted to a flat cable laminating machine (FCLM). Pressure heating rollers should be heated up to the setting temperature $(175^{\circ}C)$ and kept on to producing good quality flexible flat cables (FFC). Existing Pressure heating rollers took more than 70minutes to the setting temperature and did not keep on the setting temperature in production. Temperature controller, electric power controller, material and diameter of rollers and heat capacities were changed to improve the temperature control of the pressure heat rollers for better production of the FFC. Thus, the reaching time to the setting temperature (RT), temperature stability time (TST) and temperature hunting (TH) were measured and compared with the existing pressure rollers case. The RT of A roller was shortened by 50minutes, and B roller was shortened by 15minutes. The TST of A roller was shortened by 13minutes, and B roller was shortened by 15minutes. The THs of both A and B rollers were settled up to ${\pm}5^{\circ}C$. Finally, the productivity of the FCLM and the quality of the FFC were increased.

• 항공우주시스템공학회지
• /
• 제3권1호
• /
• pp.36-41
• /
• 2009

Quad-rotor is one kind of a rotorcraft in Unmanned Aerial Vehicle (UAV), which consists of four rotors in total and fixed-pitch blades located at the four corners. This vehicle is emerging as popular platform for UAV research due to the simplicity of its construction, the ability of hovering and the vertical take-off and landing (VTOL) capability, etc. Because of those specific capabilities, this vehicle can be applied to many fields: search and rescue, mobile sensor networks, fire observation, etc. However a quad-rotor is much affected by the disturbance due to the characteristics of structure. So this vehicle needs attitude control for stabilizing. In this paper, we design the control law for automatic stabilization. The PID controller is used to control a brushless DC motor. And an accelerometer is used to measure the roll and pitch angles of a quad-rotor.

• 한국정밀공학회지
• /
• 제13권11호
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.34-41
• /
• 1997

This paper presents a technique to control a very flexible robot moving in a vertical plane. The flexible robot is modeled as an Euler-Bernoulli beam. Elastic deformation is approximated using the assmed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. A control algorithm is developed using a simple PID cnotrol tech- nique. The proportional, integral and deivative control gains are determined based on the dominant pole placement method and tuned to show no overshoot and no steady state error, and short settling time. The effectiveness of the developed control scheme is showed in the hub angular diaplacement control experiment. Three different end masses are uned in the experiment. The experimental results show that developed control algorithm is very effective showing little overshoot, no steady state error, and less than 2.5 second settl- ing time in case of having an end mass which is equivalent to 45% of the manipulator mass. Also the experimental results show that the residual vibration fo the end point is effectively controlled.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1147-1154
• /
• 2012

본 논문에서는 풍력발전기의 회전속도와 출력을 제어하기 위한 블레이드 피치 제어기 및 발전기 토크 제어 기법을 제시하고 비선형 시뮬레이션을 통하여 그 성능을 확인하였다. 회전속도 오차 및 출력오차를 이용한 양한정 함수를 정의하고 리아프노프 안정성 이론을 적용하여 정적 피치 제어기와 동적 토크 제어기를 설계하고, 제어기 설계 모델과 실제 적용 모델간의 차이를 보상할 수 있도록 시뮬레이션 기반 최적화를 이용하여 설계 인자 값을 결정하였다. 풍력발전기 제어기 설계에 가장 많이 사용되는 동력 전달계 모델을 기반으로 제어기 설계 절차를 예시하였고, 대표적으로 사용되는 비례-적분-미분 제어 및 최대 출력점 추종 토크 제어기와 성능 비교를 통하여 제안된 제어 설계 기법의 타당성을 검증하였다.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.21-28
• /
• 2010

본 논문에서는 만타형상 무인잠수정(Manta-type unmanned underwater test vehicle)의 운동성능과 제어기설계에 대한 성능을 해석하기 위한 수학모델을 정립하여 시뮬레이션 프로그램을 개발하였다. 6자유도 운동방정식을 이용하여 Matlab/Simulink로 시뮬레이션 프로그램을 구성하였다. 개발된 시뮬레이션 프로그램을 이용하여 만타형상 무인잠수정의 동역학적 운동성능을 해석하였으며, 무인잠수정의 제어성능을 해석하기 위하여 PID(비례-미분-적분)제어기와 슬라이딩모드(Sliding mode)제어기를 설계하여 만타형상 무인잠수정의 제어성능을 해석하였다. 설계된 제어기는 무인잠수정의 수심제어(Depth control)와 방향제어(Heading control)에 사용되었다. 설계된 제어기의 성능을 확인하기 위하여 미해군 대학원의 AUV II와 비교하였다. 설계된 수심제어기와 방향제어기를 이용하여 만타형 무인잠수정의 설계목표에 부합하는 항해제어 시뮬레이션을 실시하였다.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2534-2539
• /
• 2015

발전기의 전압조정장치(AVR)를 이용하여 전압을 조절하는 방식은 기존 아날로그방식과 교체중인 디지털방식을 나눌 수 있다. 일반적으로 브러쉬레스형의 여자시스템을 이용하여 전압을 조절할 경우 전부하에 대하여 전압변동을 작게 하여야 한다. AVR의 제어방법으로 PID(비례-적분-미분)제어방식이 많이 사용되고 있다. 그러나 이 제어기법은 제어대상에 대하여 제어기의 파라미터를 조절하여 과도응답을 줄이고 있다. 따라서 제어대상이 달라질 경우 다시 제어기의 파라미터를 다시 설정해야하는 문제점이 있다. 본 연구에서는 제어대상의 파라미터 변동에 대하여 제어기의 파라미터를 재설정 필요없이 iPID(intelligent PID)제어기를 이용하여 발전기 AVR시스템에 적용하여 전부하 시에도 전압변동이 작은 응답을 얻도록 설계하고 시뮬레이션과 실험을 통하여 과도응답을 개선하였다.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.14-21
• /
• 2017

매우 큰 정안정성($C_{L{\alpha}}$)을 갖는 틸트덕트 운동모델에 대해 선형 파라미터를 갖는 Sigma-Pi 신경망(SPNN) 제어법칙을 적용하였다. 기존의 비례적분미분(PID) 제어기는 매우 큰 정안정성을 갖는 운동모델이 갖는 강한 기수숙임 문제를 해결하기 어려웠고 이로인해 제어성능을 높일 수 없었다. 이와 달리 외부루프와 내부루프에 모두 적용된 SPNN 제어기는 동역학역변환 및 모델오차를 줄일 수 있는 의사적응제어 명령을 이용해서 과도한 안정성을 개선할 수 있었다. 이를 검증하기 위해서 경로점 추종 시뮬레이션을 이용해서 PID제어 성능과 SPNN제어 성능을 비교하였다.