• Journal of Plant Biotechnology
• /
• v.41 no.4
• /
• pp.216-222
• /
• 2014

This study was carried out to develop an efficient transformation protocol via particle bombardment with PLBs (protocorm-like bodies) in Phalaenopsis. To achieve this aim, osmoticum treatment and an increasing shooting chances in particle bombardment process were applied for this study. In addition, pCAMBIA3301: ORE7 vector which contains a herbicide-resistance bar gene as a selectable marker and ORE7 gene as a gene of interests were employed. With regard to the increasing chances of shooting in particle bombardment, double shooting was the best results with 1.5 ~ 2.5 times higher than those of a single or triple shooting treatment in the productioon of PPT (D-L-phosphinothricin)-resistant PLBs. However, regeneration rate of shoots in double shooting was not high as a single shooting. Further, double shooting showed 35 ~ 40% higher than that of a single shooting in the frequency of browning. Regarding effects of different osmotic treatments, combination of 0.2 M sorbitol with 0.2 M mannitol showed the best results in transformation efficiency, regeneration of transformants and reduction of browning. Putative transgenic Phalaenopsis plants were analyzed by PCR analysis and confirmed the presence of bar and ORE 7 gene. Also, real-time PCR was conducted by using 21 transgenic plants and showed only 4 plants had one copy of transgene; whereas, the other 17 plants had more than 2 copies of transgene. Transgenic phalaenopsis plants produced in this study were transferred to pots and flowered normally without morphological variations in flower and leaf.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2013

In this study, the resistance to ozone and characteristics of ozone-induced damage were investigated on the perennial ground cover plant species. Sedum kamtschaticum and Hosta longipes were exposed to $200{\mu}g{\cdot}kg^{-1}$ ozone for 8 hours per day (from 08:00 to 16:00) in the naturally irradiated phytotron. The extent of ozone-induced damage was measured through the analysis of physiological parameters, such as water use efficiency (WUE), chlorophyll content (Chl. a, Chl. b, Chl. a + b, and Chl. a/b ratio), carotenoid contents, and the induction of reactive oxygen species (ROS). Ozone exposure significantly reduced the daytime WUE in both species. The contents of chlorophyll and carotenoid were also decreased and ROS, such as hydrogen peroxide ($H_2O_2$) and superoxide radical ($O_2{^-}$) were accumulated after ozone exposure. The above results of this study suggested that S. kamtschaticum is more resistant to atmospheric ozone than Hosta longipes. Considering its fast responses to ozone, it was also assumed that Hosta longipes can be used as an indicator plant of an increase in atmospheric ozone concentration.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.81-86
• /
• 2001

This experiment was carried out to investigate watering with relation to growth, quality and yield of essential oil in sweet basil. The degree of water stress was taken as amount of watering. D1 was watered with 25mL for 2 weeks and 30mL from 4 to 5 weeks after planting in Wagner pot (1/20000a, ${\phi}24cm$). As this, 75mL and 90mL, 225mL and 270mL, and 675mL and 810mL were watered in D2, D3, and D4 treatment respectively. DFT was set up as water stress was not inflicted. The growth of basil in D3 and D4 was better than that of others, in which root activity was as much twice as that of D1. Essential oil of D1 was recorded the lowest content as 0.33%. The result of proline content, peroxidase activity, photosynthesis, stomatal conductance and stomatal resistance were proved D1 to be stressed. This treatment consequently increased the content of essential oil. In consideration of growth and essential oil content, D3 treatment was highest as 47.37mg in oil production per plant. Finally, D3 watered with 225mL for 2 weeks and 275mL from 4 to 5 weeks after planting could be selected on the purpose of both plant growth and essential oil production. Essential oil content of sweet basil was increased in response to water stress. For increase of essential oil yield, oil synthesis could be raised by giving water stress just before harvesting.

• Journal of Nutrition and Health
• /
• v.51 no.1
• /
• pp.14-22
• /
• 2018

Purpose: Colorectal cancer, which is one of the most commonly diagnosed cancers in developing and developed countries, is highly associated with obesity. The association is largely attributed to changes to western style diets in those countries containing high-fat and high-energy. Luteolin (LUT) is a known potent inhibitor of inflammation, obesity, and cancer. In this study, we investigated the effects of LUT on chemical-induced colon carcinogenesis in high fat diet (HFD)-fed obese mice. Methods: Five-week-old male C57BL/6 mice received a single intraperitoneal injection of azoxymethane (AOM) at a dose of 12.5 mg/kg body weight. Mice were then divided into four groups (n = 10) that received one of the following diets for 11 weeks after the AOM injection: normal diet (ND); HFD; HFD with 0.0025% LUT (HFD LL); HFD with 0.005% LUT (HFD HL). One week after AOM injection, animals received 1~2% dextran sodium sulfate in their drinking water over three cycles consisting of five consecutive days each that were separated by 16 days. Results: Body weight, ratio of colon weight/length, and tumor multiplicity increased significantly in the HFD group compared to the ND group. Luteolin supplementation of the HFD significantly reduced the ratio of colon weight/length and colon tumors, but not body weight. The levels of plasma $TNF-{\alpha}$ and colonic expression of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 protein increased in response to HFD, but were suppressed by LUT supplementation. Immunohistochemistry analysis also showed that iNOS expression was decreased by LUT. Conclusion: Consumption of LUT may reduce the risk of obesity-associated colorectal cancer by suppression of colonic inflammation.

• Journal of Yeungnam Medical Science
• /
• v.7 no.1
• /
• pp.29-37
• /
• 1990

The effects of insulin and exercise on glucose uptake of skeletal muscle were investigated in soleus muscle isolated from low dose streptozotocin induced diabetic rats in vitro. Glucose uptake was assessed by measuring $^3H$-methylglucose uptake in vitro. Basal glucose uptake in diabetes was reduced by approximately one-third of the control value($5.6{\pm}0.73{\mu}Mol$/g/20min. in diabetes versus $8.4{\pm}0.77$ in control, P<0.01). There was also a significant decrease(P<0.01) in glucose uptake of diabetes at physiologic insulin concentration ($200{\mu}IU$/ml) by 40% ($6.1{\pm}1.20$ versus $10.0{\pm}0.81$). Furthermore, maximal insulin($20000{\mu}IU$/ml)-stimulated glucose uptake was 36% lower in diabetes as compared with control($7.3{\pm}1.29$ versus $11.4{\pm}1.29$, P<0.01). In contrast, exercise(1.0km/hr, treadmill running for 45min.) effect on glucose uptake was so dramatic in diabetes that glucose uptake at basal state was 8.4+1.09 and insulin stimulated-glucose uptake were $10.2{\pm}1.47$ and $11.9{\pm}1.64$, in 200 and $20000{\mu}IU$/ml added insulin, respectively. These results suggest that insulin insensitivity develops in skeletal muscle after 2 weeks of streptozotocin-induced diabetes, but these insensitivity was recovered significantly by single session of running exercise.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.71-71
• /
• 2009

전자제품의 다양한 기능들의 융복합화 및 휴대 편의성 경향은 이제 더 이상 새로운 것이 아니다. 이러한 추세에 따라 전자부품들은 모듈화 되고, 휴대하기 용이해 지고 있다. 또한 다양한 제품 디자인에 적용하기 위해 제품에 장착되는 부품의 기구적 위치 배열의 한계 또한 제약 받고 있다. 따라서 최근의 전자부품은 모듈화 되고 있으며, 기구적 한계를 극복하기 위한 Flexible 모듈의 사용이 증가하고 있다. 또한 양산측면에서 Roll-to-Roll(R2R) 방식을 적용함으로써 생산성을 극대화 하고 있다. 이때 R2R 적용을 위해서는 제품이 굴곡 될 수 있도록 유연성이 보장되는 Bendable 전자모듈의 개발이 필수적으로 요구되고 있다. Flexible 기판은 더 이상 새로운 기술이 아니지만, Felxible 기판 내부에 칩이 내장되고, 회로가 형성되어 자체적으로 기능을 수행할 수 있도록 한 Bendable 전자모듈을 R2R 방식으로 제조하는 기술은 매우 새로운 접근이라 할 수 있다. 이러한 기술개발이 현실화 된다면, Wearable Electronics 및 Flexible Display 등 다양한 전자제품에 응용될 수 있을 것으로 기대된다. 그러나 이러한 제품의 상용화를 위해서는 Bendable 전자모듈에 대한 신뢰성이 확보되고, 제품으로써의 수명이 보증되어야 한다. 신규 개발되는 제품의 신뢰성 검증항목이나 수명평가 모델은 현재까지 제안되지 않고 있는 실정이다. 또한 다양한 사용 환경에서 고장(Failure) 발생을 유발하는 스트레스 인자(Stress Factor)를 도출함으로써, 가속시험 또는 신뢰성 검증을 위한 인가 스트레스를 선정할 수 있다. 그러나 이러한 고장물리를 기반으로 스트레스 인자를 해석한 결과는 아직 보고되고 있지 않다. 따라서 본 연구에서는 $50{\mu}m$ 두께의 Si Chip에 저항변화를 관찰하기 위한 회로를 형성한 후 폴리이미드 기판을 이용하여 Si Chip이 임베딩된 Bendable 전자모듈을 제작하였다. 전자모듈의 실사용 환경에서의 수명예측을 위한 사전단계로써 고장물리에 기반한 고장모드와 고장메카니즘을 해석하는 것이 최우선 수행되어야 하며, 이를 바탕으로 고장을 유발하는 스트레스 인자를 도출 하였다. 고장도출을 위해 시제품은 JEDEC J-STD-020C의 MSL시험, 고온가압시험, 열충격시험 및 고온저장시험을 각각 수행하였으며, 이로부터 발생된 각각의 고장유형을 분석함으로써 스트레스 인자를 도출하였다. 또한 모아레(Moire) 간섭계를 이용하여 제작된 샘플의 온도변화에 따른 변형해석을 수행하였고, 동시에 Half Symetry Model을 이용한 유한요소해석(FEA)을 수행하여 변형해석 및 스트레스 유발원인을 도출하였다. 이 결과로 부터 고장물리 기반의 고장해석과 Moire 분석 그리고 시뮬레이션 해석 결과를 바탕으로 Bendable 전자모듈의 고장유발 스트레스 인자를 해석할 수 있었다.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.22-28
• /
• 2012

Functionalized graphene/epoxy composites were prepared to miprove thermal conductivities of epoxy composites and to maintain electrical insulating property. Graphene oxide (GO) was prepared using Hummers method, and then GO was reacted with aluminum isopropoxide to functionalize $Al(OH)_3$ layer onto GO surface by a simple sol-gel method (Al-GO). GO and Al-GO were characterized by X-ray photoelectron spectroscopy, field emission scanning electron microscopy and transmission electron microscopy. The analyses confirm that GO was coated with a large and dense coverage of $Al(OH)_3$. GO and Al-GO (1 and 3 wt%) were embedded in bisphenol A (DGEBA) to investigate the effects of electrical insulating property. Electrical resistivity showed that Al-GO had better insulating property than GO. Further, the thermal conductivity of GO and Al-GO/epoxy composites was higher than that of neat epoxy resins. In particular, the thermal conductivity of Al-GO/bisphenol F (DGEBF) improved by 23.3% and Al-GO/DGEBA enhanced by 21.8% compared with pure epoxy resins.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.342-345
• /
• 2009

"Hwaweon 2" was developed from an interspecific cross between Hwaseongbyeo and a wild species, Oryza rufipogon L. (IRGC 105491) based on marker-aided selection. The recurrent parent "Hwaseongbyeo" is a high grain quality cultivar with medium-maturity. Hwaweon 2 is nearly isogenic to Hwaseongbyeo except a small O. rufipogon introgression on chromosome 9. This segment was associated with genes controlling a number of traits including grain weight, heading date, culm length, and spikelets per panicle. The preliminary and replicated yield trial was conducted at Chungnam National University in 2004, 2005 and 2006. The local adaptability test was carried out by the National Seed Management Office (NSMO) in 2007 and 2008. This cultivar was registered to NSMO with a cultivar designated as "Hwaweon 2". This cultivar averaged 98cm in culm length and has a medium to late growth duration. This variety is resistant to stripe virus as the recurrent parent. Milled rice of "Hwaweon 2" is translucent and the grain quality traits are comparable to those of the recurrent parent. The yield potential of "Hwaweon 2" in grain is about 7.68 MT/ha at the ordinary fertilizer level about 14% higher than that of Hwaseongbyeo due to increase in grain weight and spikelets per panicle.

• Journal of The Geomorphological Association of Korea
• /
• v.21 no.4
• /
• pp.19-40
• /
• 2014

Rock rebound values and chemical compositions of Gamak island at Sangha, Gochang, Jeollabuk do are analysed as a part of geomorphic survey of that area. Some corestones are formed by deep weathering found from the summit of rock mass of Gamak island, while the rocks a part of weathering front are exposed at the foot of the island. Rebound values of rock increase toward coastal plain, so summit would be weak in resistance to erosion. It can be assumed that chemical weathering is more active at the summit by the chemical index of alteration and changes in chemical composition ratio. However it should be mentioned that the samples are taken from the surface of the rock mass that more fresh part will be exposed when the weathered parts are removed. The chemical composition and CIA values of the polygonal cracks found from on the surface of weathering rind showed that this part has values between those of the summit and the footslope. The bottom of weathering rind with polygonal cracks has higher CIA value than those of the surface. Though it supports the result from the Bisul Mt., there also difference in the ratio of SiO2. It looks caused by the difference in weathering environment and chemical difference in parent rock. In summary Gamak island is the remnants of weathering front after removal of weathered material. The removal processes are more active at the footslope where the coastal processes are stronger than the summit.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.51-69
• /
• 2012

Physical strength of the rock is the most important factor of resistance to erosion and has been measured through various way. Bedrock microforms, like potholes and grooves, are the forms sculpted by the erosional processes of flow and the location and morphology are strongly affected by the differential erosion. It also assumed that the physical strength of the rock controls the erosion rate and mode of erosion. The schmidt hammer has been used to measure the rock strength in the field for the geomorphological research. To find the relationship between the rock strength and microforms, Schmidt hammer's R(rebound) were measured in the Baeksuktan, middle reach of Gilancheon, Cheongsong, Gyungsangbuk do. The overall values of rebound of the local sandstone showed over 65 in most cases, so it can be regarded as 'very strong'. It is found that the rebound values of the rock surface decreased towards current water level. It also, however, found that there was no systematic differences in rebound values among the topographically high and lows in the bedrock surface. There was no statistically significant difference in rebound values of the area with well developed microforms and others. The values of R from the exposed faces and inside of the microforms are similar. In the case of conglomerate, the part with the gravel showed higher values that the parts with sands. The rebound values are decreased near of(<1cm) the geological discontinuities(including joint and faults), so this line of weakness could be the point of initiation of active erosion to form microforms. However there is large variations in rebound values within this part. It also should be mentioned that topological relation between the strike of the geologic discontinuities and flow direction looks control the mode of erosional processes.