Lee, Hwa-Seok;Thayalan, I. Daniel Thena;Park, Joung-Hu
Proceedings of the KIPE Conference
/
2012.07a
/
pp.103-104
/
2012
기존의 저항 전류측정 방법의 경우 샘플링이 되지 않는 시간에도 전류가 센서 저항에 흐르게 되어 전력낭비가 있었다. 본 논문에서는 센서저항에 병렬로 바이패스 MOSFET를 달아줌으로써 샘플링이 되는 시간에서는 MOSFET off동작을 통해 저항에 전류를 흐르게 하여 전류를 측정하고 샘플링이 되지 않는 시간에서는 MOSFET on동작을 통해 전류가 센서저항에 흐르지 않게 하여 전력낭비를 막고, 센서저항이 감당하는 정격전력도 낮추는 이점이 있는 저항 전류 측정방법을 제안하고자 한다.
본 논문에서는 저항성 초광대역 마이크로웨이브 센서의 설계이론과 구현 방법에 대해 설명하고, 시뮬레이션을 통하여 설계된 센서의 특성을 분석한다. 구현을 위하여 연속적인 저항 프로파일은 이산화되었으며 칩 저항을 이용하여 이산 저항을 실장한다. 시뮬레이션을 통해 칩 저항 8개로 약 8 GHz까지 연속적인 저항 프로파일과 유사한 성능을 보인다는 것을 보인다.
본 연구에서는 연료전지에의 응용을 위한 저가격의 무산소, 상온동작 가능한 센서구조를 설계, 제작하고 특성을 평가하였다. 연료전지의 수소 농도를 측정하기 위해서는 50ppm에서 5% 이상까지 넓은 범위를 감지할 수 있는 수소센서의 성능이 매우 중요하다. 이러한 특성과 상용화를 위해 가격 경쟁력을 갖는 수소센서로서, 수소흡착에 따른 Pd의 저항변화 특성을 이용한 센서 구조에 대하여 연구하였다. 높은 저항치를 갖는 Pd 후막 구조설계를 통하여 저항 감소형의 센서를 제작하여 특성평가를 하였다. 저가형으로 설계 제작된 Pd 수소센서는 50~20000ppm 범위에서 감지특성을 나타내었으며, 약 40sec의 응답속도를 보였다.
Jang, Soo-Jin;Woo, Sam Yong;Yang, Tae-Heon;Jeong, Jin-Young;Hwang, Jae Yong
Proceedings of the Korean Society of Computer Information Conference
/
2016.01a
/
pp.137-139
/
2016
본 논문에서는 압저항 소재 및 센서 기술과 ICT 응용 기술에 대해 소개한다. 먼저 압저항 소재의 구성 및 작동원리를 소개하고, 한국표준과학연구원에서 개발한 유연한 압저항 센서의 구성과 성능에 대해 기술한다. 또한, 개발된 압저항 센서와 ICT 기술을 융합한 스마트 안전 시스템 및 스마트 창호 침입감지 시스템에 대해 기술한다. 마지막으로, ICT기술을 기반으로 압저항 센서기술이 확장해 나아가야 할 스마트 보안 시스템 개발의 필요성을 기술한다.
Journal of the Korea institute for structural maintenance and inspection
/
v.18
no.3
/
pp.143-152
/
2014
In this study, the sensor response and sensitivity is experimented and analyzed quantitatively by the line numbers of chlorine ion reaction type corrosion sensor that is developed. The sensor response of the developed corrosion sensor is verified with properties of chlorine ion. The multilineal sensor is shown a large resistance change more than the single line sensor by damage of the sensor. And, the resistance change of sensor is as large as high concentration of NaCl aqueous solution, the sensitivity of multilineal sensor is higher than single line sensor's, and the depth of sensor's location is as large as the increasing of resistance change time (cycle). These results suggest that, the developed corrosion sensor could sense corrosion reaction, sensor sensitivity and change of resistance for chloride ion. Especially, It was judged that 7 line sensor was the most superior for monitoring chloride ion immigration into concrete.
Platinum thin films were deposited on $SiO_{2}/Si$ and $Al_{2}O_{3}$ substrates by DC magnetron sputtering for RTD (resistance thermometer devices) temperature sensors. The resistivity and sheet resistivity of these films were decreased with increasing the annealing temperature and time. We made Pt resistance pattern on $Al_{2}O_{3}$ substrate by lift-off method and fabricated Pt-RTD temperature sensors by using W-wire, silver epoxy and SOG(spin-on-glass). In the temperature range of $25{\sim}400^{\circ}C$, we investigated TCR(temperature coefficient of resistance) and resistance ratio of Pt-RTD temperature sensors. TCR values were increased with increasing the annealing temperature, time and the thickness of Pt thin films. Resistance values were varied linearly within the range of measurement temperature. At annealing temperature of $1000^{\circ}C$, time of 240min and thin film thickness of $1{\mu}m$, we obtained TCR value of $3825ppm/^{\circ}C$ close to the Pt bulk value.
본 논문에서는 다이어프램을 세라믹을 사용하여 2차 변환 소자로 금속 스트레인 게이지 대신에 thick film piezoresistor를 이용한 후막 압력센서에 관한 연구이다. 다이어프램의 미소 변형을 후막의 비저항 변화로 검출하는 압저항 효과를 이용하는 방식이다. 종래의 압력센서와 비교하여 크리프 현상이 적고, 안정성이 우수한 특징을 갖고 있다. 또한 저항선이나 박 게이지의 게이지율이 3$\sim$5 인 것이 비하면 후막저항을 사용한 경우, 약 15$\sim$20정도의 높은 게이지율을 얻을 수 있어서 측정범위를 넓게 할 수 있으며, 후막공정의 스크린 프린팅을 통한 자동화는 수율의 향상과 저 가격화를 실현할 수 있다. 또, 후막 저항형 압력센서는 두 개의 저항이 다이어프램의 중앙 부근에 위치하며, 나머지 두 개의 저항은 가장자리에 위치시킴으로써 미소 변형에서도 저항값의 변화를 읽을 수 있도록 하였고, 휘스톤 브리지의 연결 도체부는 Pt를 주성분으로 하는 conductive paste(DHC7085)를 사용하였다. 이렇게 설계.제작된 압력 센서를 지지대에 고정시킨 후 캡슐에 넣고 감도, 선형성, 히스테리시스 그리고 온도특성 등을 고찰하였다.
In order to measure the thickness of the slag layer on the molten metal in the melting vessels for steel making foundaries, we manufactured the slag-thickness measuring system consisting of the probe and its driving system, which is based on the principle of detecting the change in the electrical resistivity. Experimental results show that there is a very wide difference of the electrical resistivity by the order of about $10^3$ between the molten metal and the hot slag and, hence, the air/slag and slag/molten metal interface can be exactly detected with the use of the probe which can be moved toward the melt. Therefore, it can be concluded that the proposed scheme of the slag measurement system in this study is Proven to be excellent in its efficiency and accuracy.
No, Hui-Jun;Park, Jin-Seong;Kim, Hyeon-Jong;Kim, An-Na;Han, Min-A;Lee, Ho-Nyeon
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.84.1-84.1
/
2018
현재 사용되고 있는 화석 연료는 고갈되고 있으며 지구온난화와 같은 환경오염을 일으키는 주원인으로 이를 대체하는 에너지원으로서 수소가 주목받고 있다. 그러나 수소는 상온 및 대기압에서 4 %의 낮은 LEL (lower explosive limit)을 가지므로 높은 인화성과 폭발성을 가진다. 또한 무색, 무취한 성질을 가지고 있어 사람에 의해 검출되지 않는다. 그러므로 상온에서의 수소 농도를 정량화하고 검출하기 위한 방법이 필요하다. 수소를 검출하기 위한 수소센서에는 저항, 촉매, 광학, 일함수 등을 이용한 센서들이 있으며 그 중 저항을 이용한 귀금속 기반 수소센서가 널리 알려져 있다. 팔라듐(Pd), 백금 (Pt)와 같은 귀금속 기반 수소센서는 높은 수소 용해도 및 확산으로 인해 수소에 우수한 선택성을 가진다. 특히 Pd는 흡착에 대한 친화성이 매우 우수하다. 팔라듐에 수소가 노출되면, 수소가 Pd 격자로 확산되어 Pd-hydride를 형성시켜 부피가 팽창되고 저항이 변한다. 이러한 특성을 바탕으로 팔라듐의 저항 변화를 기반으로 한 수소센서의 개발이 진행되고 있다. 본 연구에서는 물리기상증착 (PVD)을 이용하여 다양한 다공성 나노 Pd 박막을 가지는 수소센서를 제작하였으며, 수소 농도에 따른 실온에서의 수소 검출 특성을 관찰하였다. 제작된 다공성 나노 Pd 박막의 특성은 SEM, TEM 및 XRD를 통하여 확인하였다. 다공성 나노 Pd 박막이 수소에 노출 되었을 때 전자 산란 및 접촉 면적의 증가에 따른 저항의 변화를 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.