• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.439-442
• /
• 2013

This study was conducted to develop the testing method for excessive water tolerance at germinating stage and to screen 31 domestic peanut cultivars. Regardless of peanut grain scales, the amount of seed absorption nearly reached the peak in 10 hours after imbibition. When peanut seed in vermiculate soil was directly soaked in water, ability of emergence did not reduced until 16 days and then sharply reduce to 25 days with non-emergence. When seeds germinated for 1, 2, 3, and 4 days after seeding (DAS) were soaked, the emergence abilities were distinctively varied according to the sequent soaking days such as 1, 2, 3, 4, and 5 days. This explained the negative relationship between first germinating days (DAS) and following soaking days. Using the method of 2 day germinating and 3 day soaking that show less than 70% of emergence ability, 31 peanut cultivars were applied to test excessive water tolerance. Emergence rates varied 0% to 69% according to cultivar. Cultivar Daekwang, Sinkwang, Daecheong and Baekseon had over 50% emergence rates. These results suggested that the degree of water resistance in germinating stage may be important point to evaluate the excessive water resistance among cultivars.

• Korean journal of applied entomology
• /
• v.18 no.2 s.39
• /
• pp.101-106
• /
• 1979

Present studies were carried out to get a basic information for biological control of soybean rod borer, Grapholitha glycinivorella Matsumura, causing main injury in soybean cultivation in Korea. 1474 native strains were cultivated in field to evaluate the pod borer damage. Pubescence density and color, maturity group, seed coat color, aphid and general leaf damage and seed damage by pod borer were investigated, and determined among their relationships. As another basic study for ecological control of insect, 6 leading varieties were planted on different planting date with 3 levels of plant spacing, on which pod borer damage and some related agronomic characters were studied. The results obtained one summarized as follows: Average injury of soybean pod borer was $5.2\%$ ranging $0-38\%$ in 1474 strains planted on 20 May. Non-significant correlations were found between pod borer damage and pubescence density and color, while pod borer damage closely related with maturity groupand aphid damage at $5\%$ level ofttests. Most severe damage was found in green seed coast color and maturity group V. Late and sparse plantings tend to have more damages to the pod borer than those of early and dense plantings. Pod setting date and period of pod maturing seemed related with pod borer damage. Bongeui and Chungbuk-baik cultivars were resistance to soybean pod borer, while Clark and Kumkang-daerip were susceptible in field tests.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.83-91
• /
• 1994

We have constructed a vertical gradient freeze (VGF) grower for GaAs single crystals 2 inch in diameter and have grown semi-insulating GaAs co-doped with Cr and In. For the co-doped crystal, the segregation coefficients of the dopants remain unchanged when compared to those doped with only Cr or In. The concentration of Cr and in atoms range from about $2{\Times}10_{16} to 3{imes}10^{17} cm^{-3}$ and $2{\Times}10^{19} to 3{\Times}10^{20} cm^{-3}$ at the seed to the tail part of the grown crystal, respectively. The averaged dislocation etch pit density is found to be less than $8000 cm^{-2}$ throughout the ingot. It is also found that there is some evidence of lattice hardening for the crystal in which the dislocation density is decreased to less than $1000 cm^{-2}$ as In concentration increases. The resistivity increases abruptly from $10^{-2}$ up to $10^8$ Ohm-cm, while the carrier concentration decreases from $10^{16}$ to $10^8 cm^{-3}$ along the growth direction of the GaAs crystal. Semi-insulating properties can be obtained above a critical concentration of Cr of about $6{\Times}10{^16} cm^{-3}$ in the crystal. The main deep levels existing in the GaAs: Cr,In sample are two electron traps at $E_C-0.81eV, E_C-0.35eV$, and two hole traps at $E_V+0.89eV, E_V+0.65eV$.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.95-103
• /
• 2015

In this study, the causes and countermeasures for the leakage of a sea dyke under construction are analyzed. In general, the seabed ground is clearly divided from the embankment but a lot of parts show abnormal zones with low resistivity from the results of electric resistivity survey. Hence the causes of the leakage are considered as following: three-dimensional shear strain behavior, irregular compulsory replacement of the soft seabed ground with low strength and quality deterioration of the waterproof sheets during the closing process. The improvement method is determined by considering the constructability in the seawater and its velocity condition, durability, economic feasibility, similar application cases and so on. Consequently, a combination of low slump mortar and slurry grouting and injection method is selected as an optimum combination. Mixing ratio and improvement pattern are determined after drilling investigation and pilot test. The improvement boundary is separated into general and intense leakage area. The construction is performed with each pattern and the improvement effects are confirmed. The confirmed effects with various tests after completion show tolerable ranges for all of the established standards. Finally, various issues such as prediction of length of the waterproof sheet, installation of it against seawater velocity, etc. should be considered when sea dykes are designed or executed around the western sea which has high tide difference.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.109-114
• /
• 2012

The cathode catalyst layer in polymer electrolyte membrane fuel cells (PEMFCs) was fabricated with anodic aluminum oxide (AAO) template and its structure was characterized with scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis. The SEM analysis showed that the catalyst layer was fabricated the Pt nanowire with uniform shape and size. The BET analysis showed that the volume of pores in range of 20-100 nm was enhanced by AAO template. The electrochemical properties with the membrane electrode assembly (MEA) were evaluated by current-voltage polarization measurements and electrochemical impedance spectroscopy. The results showed that the MEA with AAO template reduced the mass transfer resistance and improved the cell performance by approximately 25% through controlling the structure of catalyst layer.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.122-134
• /
• 1998

In this review, we describe the electrochemical properties of spinel-type lithium manganese oxides $(Li_xMn_2O_4)$ and their failure modes encountered in 4 V lithium rechargable cells. The long-term cyclability (reversibility) of spinel electrodes is determined partly by the purity, size and distribution of spinel particles, and also by the microstructure of electrode plates. A proper selection of electrolytes is another important task in cyclability enhancements. In the spinel preparation, impurity formation and cation mixing should be minimized. The carbon content in composite cathodes should also be minimized to the extent where the cell polarization does not bring about adverse effects on cell performances. The binder content should be optimized on the basis of dispersion of component materials and mechanical strength of the plates. Cathodic capacity losses arising from solvent oxidation and spinel dissolution can be mitigated by using electrolytes composed of carbonates and/or fluorine-containing lithium salts. The carbon additives may be selected after a trade-off between the cell polarization in composite cathodes and the solvent oxidation on carbon surface.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.27-48
• /
• 1984

This study is conserned with the optimization of reinforced concrete frames using limit state design theory. Formulations of the optimal design for reinforced concrete frame based on the limit state theory turn out to be the nonlinear programming problems which have to deal with the required steel area, the width and effective height of the beam and column section and the moment reduction factor as the design variables. The objective function is formulated as the total construction cost which considers the costs of steel, concrete and forming for the reinforced concrete frames, and the basic constraints are imposed upon both ultimate and serviciability limit state concepts. Also, the stress blocks assumpted in CP110 and Hognestad et al. theory are applied to analysis an ultimate resistant section force for the ultimate limit state and only the criteria of CP110 are used for serviciability limit state. The optimized technique which is applied to solve the nonlinear programming problems for the optimization of reinforced concrete frames is SUMT utilizing the modified Newton-Raphson method. This algorithm is used to test for the two reinforced concrete frames, and then is compared and analysized with the numerical results of reference(10) to examine its convergence, applicability and stability under the same conditions. The results of this study are discussed about the economy comparision of the optimal values for CP110 and Hognestad et al., and the applicability, stability, convergence and validity of this algorithm used herein through the numerical analyses.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.169-175
• /
• 1999

Salmonella typhimurium can encounter a wide variety of environments during its life cycle. In nature, S. typhimurium can experience and survive dramatic acid stresses that occur in diverse ecological niches ranging from pond water to phagolysosomes. These survival mechanism is aquired by the Acid Tolerance Response(ATR) in Salmonella. The ATR of S. typhimurium is a complex inducible phenomenon in which exposures to slight or moderate low pH will produce a stress response capable of protecting the organism against more severe acid challenges. ATR in Salmonella has two different systems that are called RpoS dependent and independent. We found that ATR in anaerobic was showed RpoS independent because rpoS$\Omega$AP had ATR as S. typhimurium UK1. Using the P22 MudJ(Km, lacZ) operon fusion technique and a lethal selection procedure combining low pH(pH4.5) and sodium acetate(10mM, pH4.5), we isolated LF487 aatA::MudJ which showed acid sensitive in anaerobic condition. aatA locus was determined at 12 min on Salmonella Genetic Map. The survival rate of aatA mutant was showed significantly diminished at pH4.3 than virulent wild type Salmonella in anaerobic condition(5% $CO_2$, 5% H$_2$, 90% $N_2$). Therefore isolated gene was confirmed important gene for anaerobic ATR system.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.791-798
• /
• 1994

Ohmic heating is a food processing operation in which heat is internally generated within foods by the passage of alternating electric current. The process enables highly viscous paste foods such as Kochujang, and fermented soybean paste to be heated very fast. In order to develope the novel pasteurization process of paste foods, static Ohmic heating system was built, and heating characteristic during Ohmic heating under various conditions were studied. Electric conductivities of Kochujang and fermented soybean paste at room temperature were 1.865 S/m and 2.510 S/m, respectively and increased linearly with increasing temperature. Specific heating rate was highly dependent on the frequency. The highest heating rate was achieved at 5 KHz for Kochujang and 20 KHz for fermented soybean paste. Uniform heating throughout the sample was achieved during Ohmic heating with low frequency electrical currents, however above 5 KHz frequency, surface temperature was several degrees higher than the bulk.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.266-273
• /
• 2010

Bacterial pustule of soybean (Glycines max) caused by Xanthomonas axonopodis pv. glycines is one of the most prevalent bacterial diseases of soybean. This bacterium shows strong pathogenicity to the plants and distributes throughout Korea. However, no good control measures including bactericides and resistant cultivars are available to control the disease in Korea. Therefore, this study was conducted to develop chemical control method against soybean bacterial pustule. The present study was undertaken to find out the growth inhibitory effect bactericides (8 antibiotics, 2 copper compounds, quinoline, 18 agro-chemicals) on bacterial pustule pathogen. Antibiotics test showed that tetracycline and streptomycin sulfate significantly suppressed the growth of bacterial pustule pathogen. Also, application of oxolinic acid was found to be effective for pathogen inhibition. However, vancomycin, polymyxin B sulfate and copper compounds did not show the positive suppressive effect on growth of the pathogen. Among the eighteen agro-chemicals, streptomycin sulfate + oxytetracyclin (18.8 + 1.5%) WP, oxytetracycline (17%) WP and oxolinic acid (20%) WP were found to be effective for the inhibition of the pathogen in vitro. The selected 5 agro-chemicals were also applied on soybean in field and their control effects against the soybean bacterial pustule were tested. The foliar application of streptomycin sulfate + oytetracyclin WP and oxytetracycline WP on the naturally infected soybean (Taekwangkong) showed high control value (above 70%). Therefore, it is concluded that the bactericides used in this study showed strong inhibitory effect to soybean bacterial pustule and they can be recommend to farmers to control the disease.