• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.101-102
• /
• 2019

The use of high fluidity concrete has been added in recent construction work. In this study, we analyzed segregation resistance due to admixture substitution of the system high fluidity concrete that was hardened. The research results show that the resistance to segregation at the time of admixture replacement is improved. The best results were shown with a ternary system mixed like FA and BS.

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.119-130
• /
• 1996

The theory and numerical technique using boundary elements method (BEM) are given to solve 2-dimensional resistivity problems. Potential distributions from homogeneous resistivity model and layered model are calculated by using BEM for a point source of current injection. The potential distributions of BEM are compared with those of finite difference method (FDM) and finite elements method (FEM). Among the three numerical methods to solve 2-dimensional resistivity problem, it is proved that BEM is more efficient tool than FDM and FEM in consideration of computing storage and time as weU as the accuracy of solutions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.469-474
• /
• 1996

Alloy 690은 응력부식 균열에 대한 저항성이 요구되는 원자력 발전소 증기발생기 전열관 재료에 사용되고 있다$^{(1)}$ . 응력부식 균열에 대한 저항성은 주로 결정입계에 존재하는 크롬탄화물의 기여에 의한 것이 대부분이다. 크롬탄화 석출물의 핵생성을 알아보기 위해서 110$0^{\circ}C$에서 용체화처리를 0, 1, 3, 10분 동안 하여 관찰하였다. 용체화처리한 모든 시편에서 결정입계에 존재하는 석출물의 분포는 쌍정과 교차하면서 갑자기 변화하는 것을 관찰 할 수 있다. 이처럼 석출물이 존재하지 않는 결정입계들은 대부분 낮은 ∑ 값의 CLS으로부터 약간 벗어난 입계가 될 것이다. 결정입계에 존재하는 석출물은 기지와 Cube-Cube orientation relationship을 갖는다. 그리고 단지 하나의 결정입과 반정합을 이룬다. 기지와 반정합을 이루는 석출물은 M$_{23}$ C$_{6}$형태의 크롬 탄화물이고 격자상수는 기지의 격자상수보다 3배 크다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.156-156
• /
• 2015

도금 시뮬레이션의 목적은 실제 도금 상황에서의 전류밀도 및 도금두께 분포를 정확히 예측하여 최상의 품질과 최적의 공정조건을 확립하는데 있다. 제품에 부착된 도금 두께는 기하학적 배치에 의한 저항 (1차 전류밀도), 전기화학적 전하교환 반응에 의한 분극 (2차 전류밀도) 및 확산, 유동 등 도금물질의 공급에 의한 분극(3차 전류밀도)에 의해 결정이 된다. 현재까지 도금 시뮬레이션은 1차 전류밀도 예측에 대한 전자기학적 해석과 Butler-Volmer 식에 근거한 동력학적 전기화학 해석을 통해 2차 전류밀도 분포 해석만 이루어졌다. 즉, 도금 반응에 있어서 물질공급은 항상 일정하게 유지되는 것을 가정하고 해석을 하였다. 이는 3차 전류밀도 분포에 있어서 전극반응 계면에서의 유동에 의한 물질공급이 전기화학과는 다른 물리(physics) 영역이어서 이를 전기화학과 coupling 하는데 기술적으로 어렵기 때문이었다. 그러므로, 물질공급반응이 속도결정단계가 되는 고속도금이나 저농도 도금, gap, tranch, via hole, through hole 등의 도금의 경우에는 해석결과에 큰 오차를 야기하게 된다. 본 발표에서는 그동안 접근하지 못했던 전기도금 해석에 있어서 유동해석을 커플링하여 다중물리해석을 한 결과를 발표한다. 시편으로는 회전원판전극과 회전 헐셀을 이용하여 회전속도 (rpm)에 따른 전류밀도 및 도금두께 분포의 변화 거동을 예측하였다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.58-68
• /
• 2011

As part of basic studies of monitoring carbon dioxide ($CO_2$) storage using electrical and seismic surveys, laboratory experiments have been conducted to measure resistivity and P-wave velocity changes due to the injection of $CO_2$ into water-saturated sandstone. The rock sample used is a cylinder of Berea sandstone. $CO_2$ was injected under supercritical conditions (10 MPa, $40^{\circ}C$). The experimental results show that resistivity increases monotonously throughout the injection period, while P-wave velocity and amplitude decrease drastically due to the supercritical $CO_2$ injection. A reconstructed P-wave velocity tomogram clearly images $CO_2$ migration in the sandstone sample. Both resistivity and seismic velocity are useful for monitoring $CO_2$ behaviour. P-wave velocity, however, is less sensitive than resistivity when the $CO_2$ saturation is greater than ~20%. The result indicates that the saturation estimation from resistivity can effectively complement the difficulty of $CO_2$ saturation estimations from seismic velocity variations. By combining resistivity and seismic velocity we were able to estimate $CO_2$ saturation distribution and the injected $CO_2$ behaviour in our sample.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.37-45
• /
• 2014

An embedded length of monopile caused by a scouring should be evaluated to monitor the stability of offshore foundations, because offshore foundations are affected by horizontal load. The objective of this study is to evaluate the scouring around offshore foundation by using electrical resistivity and to estimate ground stiffness by using shear wave tomography. The electrical resistivity profiles and shear wave tomography were measured according to the scour depth of model ground prepared with sand and cement. Several electrodes and bender elements were used to measure the electrical resistivity and shear waves, respectively. The electrode sets are attached on the monopile surface and bender elements are arranged in $7{\times}7$ arrays by using nylone frames. The electrical resistivity profiles and shear wave tomography are acquired by laboratory experiment. Maximum scour depth was estimated by electrical resistivity profiles and the ground stiffness of model ground was estimated by shear wave tomography. This study suggests that the electrical resistivity profiles and shear wave tomography may be useful for monitoring the stability of the offshore foundations.

• Research in Plant Disease
• /
• v.16 no.2
• /
• pp.141-147
• /
• 2010

Resistance to Phytophthora blight (Phytophthora capsici Leonian) of commercial cultivars of Capsicum pepper in Korea were evaluated from 2008 to 2010. In 2008 and 2009, the cultivars were tested for resistance to the Pc003 isolate collected in Youngyang, Gyeongbuk province. In 2010, the selected cultivars in the previous years were tested by inoculating with 3 isolates obtained from the pepper plants in Miryang in Gyeongnam province, Youngyang in Gyeongbuk province, and Goesan in Chungbuk province. A continuous variation in resistance from highly resistant to susceptible was observed among the commercial pepper cultivars. It was also noted that some cultivars, although their names were initiating with 'Yeokgang' or 'PR' meaning Phytophthora resistance, were very low in resistance or susceptible. When the resistant cultivars selected in 2008 and 2009 experiment were inoculated with the 3 isolates, all the commercial cultivars except a rootstock, 'Tantan', succumbed to the exceptionally virulent Pc005 (Miryang) isolate. Pc002 (Goesan) was a little more virulent than Pc003 (Youngyang). A few cultivars resistant to Pc003 (Youngyang) were severely infected by Pc002 (Goesan). Significant interaction in analysis of variance suggested the differential interactions between cultivars and pathogen isolates. Strategies to breed cultivars having high level of resistance to the highly variable pathogenic fungus, Phytophthora capsici, were discussed.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.77-90
• /
• 2000

Five electrical resistivity dipole-dipole and two seismic reflection surveys were performed in the southeastern margin of the Yongdong basin to delineate the shallow basin architecture. To investigate the intra-basin structure, twenty four resistivity sounding points and three dipole-dipole lines were selected especially in the vicinity of volcanic masses. The basin-fault boundaries are identified in electrical dipole-dipole resistivity section as high resistivity-contrast of approximately $1,500\;{\Omega}{\cdot}m$, characterized as a band of high standard-deviation. They are also effectively clarified in the seismic reflection data: amplitude and continuity contrasts in the common shot gather, first-arrival profiles, complex attribute plots. The intra-basin resistivity structures are constructed by interpolating vertical electrical sounding data and dipole-dipole profiles. The high-resistivity anomalies most likely originate from the northsouth-trending and northeast-dipping volcanic masses, which are to be further quantitatively investigated with geomagnetic and magnetotelluric surveys.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.89-99
• /
• 1990

It is required to develop a hull form with low resistance and high propulsive efficiency for the improvement of the ship-board operational economy. Since the hull forms with low resistance frequently have lower propulsive efficiency and on the other hand the hull forms with higher propulsive efficiency don't show good resistance characteristics, it is always very difficult to obtain economical hull forms which require less propulsive power accordingly. Efforts have been made to pursue a stern form with excellent resistance and propulsion characteristics together by shaping the run of the so-called buttock-flow type stern, which is known to have good viscous resistance performance, like that of conventional aftbody(U-type or Hogner type) featured by high propulsive efficiency. First model tests confirmed that the above concept can be one of the alternative approaches to the design of the good stern form and by the continuing efforts thereafter for the refining of the concept, propelled by the first promising results, stern form of good resistance performance together with good propulsive efficiency has been realized to some extent. In addition, it is confirmed that the new new stern can have better cavitation and vibration characteristics due to uniform wake-fields and the compact engine room arrangement can be possible due to it's larger floor area in way of engine room double bottom as compared with usual barge stern.

• Korean journal of applied entomology
• /
• v.23 no.3 s.60
• /
• pp.147-152
• /
• 1984

Six hundred and twenty five isolates of Xanthomonas campestris pv. oryzae, cauing bacterial leaf blight (BLB) of rice, were classified into five pathotypes during $1979\~1983$ in Korea. Among them, 483 isolates$(77.3\%)$ were classified as pathotype I, 83 $(13.3\%)$ as pathotype II, 54$(8.6\%)$ as pathotype III, 3 $(0.5\%)$ as pathotype IV and 2$(0.3\%)$ as pathotype V. Pathotype I was the most prevalent throughout the country. Pathotype III was widely distributed in the western or southern parts of Korea, particularly in Jeonnam, Chungnam and Gyeongnam provinces. One isolate of pathotype IV was found in Gyeongnam in 1980, and two isolates were found in Jeonnam in 1981. Most of the isolates were obtained from Milyang 23 varietal group, while the isolates of pathotype III were collected from Yushin and Tongil varietal group.