• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.89-93
• /
• 2003

1.8V 구동전압에서 10Mbps 이상의 높은 데이터 전송율을 갖는 새로운 광선로 수신기를 제작하였다. 10Mbps 입력신호 (duty ratio=50%, VIL(저준위 입력전압) = 0.5V, VIH(고준위 입력전압) =1.5V)에 대한 제작된 소자의 평균 출력 전압은 VOL(저준위 출력전압) = OV, VOH(고준위 출력전압) =1.15V로 나타났으며, 1.5V 고준위 입력전압 아래에서 평균 소비전류는 4.6mA로 나타났다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.39-55
• /
• 2022

This study carried out the laboratory tests for AE signal attenuation to determine the attenuation coefficient (α) of silo concrete in Gyeongju low and intermediate-level disposal environments. The concrete samples were prepared by satisfying the concrete mixing ratio used in the Gyeongju disposal silo, and these samples were additionally exposed depending on the temperature conditions and saturation and, dry condition. As a result of attenuation tests according to the transmission distance on three concrete specimens for each disposal condition, the AE amplitude and absolute energy measured on the saturated concrete were higher than that of the dry concrete in the initial range of the signal transmission distance, but the α of the saturated concrete was higher than that of the dry concrete. Regardless of the saturation and dry conditions, the α tended to decrease as the temperature increases. The α had a more major influence on the saturation and dry condition than the temperature condition, which means that the saturation and dry condition is the main consideration in measuring the signal attenuation of a concrete disposal structure. The α of concrete in the disposal environment expect to be used to predict the integrity of silos concrete in Gyeongju low and intermediate-level disposal environments by estimating the actual AE parameter values at the location of cracks and to determine the optimum location of sensors.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2012.10a
• /
• pp.281-282
• /
• 2012

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.4
• /
• pp.9-14
• /
• 2003

The new optical link receiver with data transfer rate higher than 10Mbps at the supply voltage of 1.8V was designed and fabricated using bipolar technology. The fabricated IC showed the dissipation current of 4.6mA under high level input voltage of 1.5V. The high level output voltage($V_{OH}$) and the low level output voltage($V_{OL}$) were 1.15V and 0V, respectively, for a given 10 Mbps signal which has duty ratio of 50%, $V_{IL}$(low level input voltage) of 0.5V, and $V_{IH}$(high level input voltage) of 1.5V, The duty ratio of output waveform was 52.6%. The rising time(t$_{r}$) and the falling time(t$_{f}$) were 9.5ns and 6.8ns, respectively. The propagation delay difference($t_{PHC}-t_{PLH}$) and the jitter($t_j$) were 11.7ns and 4.3ns, respectively.y.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.277-286
• /
• 2010

In this paper we analyse radiation measurement method for UWB wireless system of the wideband low power frequency characteristics. In the radiation measurement environment we discuss RMS electric field strength, UWB PSD, UWB detect signal level, UWB noise signal collection etc.. also, we discuss power measure method of the CISPR16-1, low level e.i.r.p radiation measurement method. lastly we analyse consideration problem for the signal analyser of the UWB system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2411-2418
• /
• 2011

The most typically utilized positioning method in the existing indoor WPS that is a positioning method utilizing distributed wireless network is the finger print. Its positioning is carried out by calculating the difference between the AP information map and WiFi AP signal collected. However, there are problems like low accuracy and high cost when the existing method and the radio map formation are applied to outdoors. In this paper, the characteristics of the existing WPS are surveyed and their problems are examined. In addition, we propose a new WPS using weak signal and a method to construct radio map in order to solve the above problems. And then, the results of experimental test will be analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2071-2077
• /
• 2010

Interface modules design between image sensor and external components are designed by FPGA (Field Programmable Gate Array) in this paper. Generally speaking, to satisfy synchronization for the poor quality data in image, SRAM is needed. To receive synchronization signal and image signal data with pixel dimension, the proposed interface logic technique is implemented. From the proposed technique, we can obtain more clear screen by implementing with pixel dimension. Operating frequency of image sensor and that of TFT-LCD are 50MHz and 6.5MHz, respectively. Most of control logic functions are embedded in FPGA. The designed logic gate counter has 33,216 and is designed by Quartus II.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.2
• /
• pp.30-37
• /
• 1994

Since the morden targets are of high speed and getting quiet in both active and passive mode, the necessities of developing advanced SONAR system capable of performing target motion analysis (TMA) and target classification are evident. In order to develop such a system, the scattering mechanism of complex bodies needs to be, some extent, fully understood and modeled. In this paper, MOving Spread Target(MOST) signal simulation model is presented and discussed. The model is based on the highlight distribution method, and simulates pulse elongation of spread target, doppler effect due to kinematics of the target as well as SONAR platform, and distribution target strength of each highlight point (HL) with directivity. The model can be used in developing and evaluating advanced SONAR system through system simulation, and can also be used in the development of target state estimation algorithm.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.93-94
• /
• 2008

로봇을 개발함에 있어 많이 겪는 어려움 중 하나는 열악한 시뮬레이션 환경 및 소프트웨어 개발이다. Microsoft사(社)의 MSRDS(Microsoft Robotics Developer Studio)는 3D시뮬레이션 환경과 로봇 구동을 위한 각종 표준화된 서비스들을 지원함으로써 이러한 문제점들을 해결할 수 있다. 본 논문에서는 원자력 발전소의 중 저준위 폐기물 저장창고 검사 로봇을 대상으로 MSRDS를 이용하여 3D 시뮬레이션 및 온라인 피드백 제어를 수행하였다. 로봇은 사륜으로 이루어져 있으며, 주행 환경 확인을 위한 카메라, 장애물 감시용 LRF(Laser Range Finer)센서, 주변 환경 감지를 위한 온도센서, 습도센서 및 MSRDS가 장착된 산업용 3D가 탑재되어 있다. MSRDS의 제어신호는 이벤트로 생성되어 3D 시뮬레이션 렌더링 시간과 동기화되며, Brick 서비스를 통해 전송된다. 피드백은 10ms 주기로 LRF 센서, Motor 엔코더 값을 받아 3D 시뮬레이션에 반영된다. 본 논문에서는 MSRDS의 시뮬레이션 및 실제 로봇과의 동기화 방식을 제시하며 구동 실험으로 검증하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.4
• /
• pp.288-295
• /
• 2004

Detection and localization of a slow and quiet target in shallow water environments is a challenging problem for which it is well known that snapshot is deficient because of a fast and strong interferer. This paper presents waveguide interference filtering technique that mitigate strong interferer problems in adaptive matched field processing. MCM (multiple constraint method) based on NDC (null direction constraint) has been proposed for new spatial interferer filter. MCM-NDC using replica force a interferer component to be filtered through CSDM (cross-spectral density matrix). This filtering have an effect on sidelobe reduction and restoring of signal gain of a quiet target. This technique was applied to a simulation on Pekeris waveguide and vertical array data from MAPLE03 (matched acoustic properties and localization experiment) in the East Sea and was shown to improve SBNR (signal-to-background-and-noise ratio) over the standard MVDR (minimum-variance distortionless response) and NSP (null space projection) technique.