• Korean Journal of Ichthyology
• /
• v.23 no.3
• /
• pp.187-197
• /
• 2011

Fish species composition and size frequency distribution of major species were analyzed using seasonal samples collected by an otter trawl in the coastal water off Uljin and Hupo in 2002. Fish collected during the study were 20 species, 1,927 individuals and 53,969 g off Uljin, and 23 species, 2,762 individuals and 146,550 g off Hupo. Liparis tessellatus, Glyptocephalus stelleri and Cleisthenes pinetorum were predominated in abundance, and these 3 species were accounted for 70.9% in the number of individuals and 83.8% in biomass off Uljin, and 90.3% and 70.9% off Hupo, respectively. In the Korean coastal water of the East Sea, the migrating pelagic fish were predominated in catch by set net or gill net, and species composition varied greatly by season. Meanwhile, the fish collected by an otter trawl in the coastal water off Uljin and Hupo were dominated by the resident demersal fishes and did not show any clear seasonal trend in species composition. Collected G. stelleri and C. pinetorum were mainly composed of young fish, and size data as depth indicated that they moved into deeper shelf as they grew.

• Restorative Dentistry and Endodontics
• /
• v.28 no.3
• /
• pp.209-221
• /
• 2003

The objectiveness of this study was to evaluate whether low-viscosity composite can bond effectively to dentin surface without bonding resin. The low-viscosity composites being 50wt% filler content were made by the inclusion of bonding resin of two self-etching systems(Cleafil SE Bond, Unifil Bond) varied with contents as 0, 10, 20, 30, 40, 50wt%. Exposed dentin surfaces of extracted 3rd molars are used. Dentin bond strengths were measured. The tests were carried out with a micro-shear device placed testing machine at a CHS of 1mm/min after a low-viscosity composite was filled into an iris cut from micro tygon tubing with internal diameter approximately 0.8mm and height of 1.0mm. 1 Flexural strength and modulus was increased with the addition of bonding resin. 2. Micro-shear bond strength to dentin was improved according to content of bonding resin irrespective of applying or not bonding resin in bonding procedure, and that of Clearfil SE Bond groups was higher than Unifil Bond. 3. There were no significant difference whether use of each bonding resin in bonding procedure for S-40, S-50, U-50(p＞0.05). 4. In SEM examination, resin was well infiltrated into dentin after primed with self-etching primer only for S-50 and U-50 in spite of the formation of thinner hybrid layer. Low viscosity composite including some functional monomer may be used as dentin bonding resin without an intermediary bonding agent. It makes a simplified bonding procedure and foresees the possibility of self-adhesive restorative material.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.

• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.19-27
• /
• 2019

Fire extinguishing composite materials based on low-viscosity epoxy resin (EP) and containing 50 wt% of encapsulated fire extinguishing agent (EFA) have been studied. The positive effect of the EP on the kinetics and temperature of the EFA decapsulation was established. The EP increases the decapsulation temperature of the EFA from 130 ℃ to 155 ℃ and changes the kinetics of the decapsulation. The epoxy matrix increases the thermal stability of the EFA more than 3.9 times compared to that of the pure EFA. The protective effect of the EP on the storage stability of the EFA was validated. The mass loss of EP-containing EFA at 60 ℃ and 80% humidity over 96 h is 0.4%. The mass loss of pure EFA under the same conditions is 15%. A similar effect was observed under ultraviolet radiation: the EP-containing EFA loses 0.8% at pure EFA mass of 6%. The testing of alternative polymer matrixes has been considered.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.3
• /
• pp.283-288
• /
• 2011

Since minerals are in ionic forms in aqueous phase (like deep sea water), it is very hard to incorporate concentrated minerals in gel like cosmetic formulations which are generally composed of carbomer or acrylates polymer. In this study, we invented a salt-resistant network formulation made of silicon copolyol. It was found that the network formulation traps minerals (especially from marine) in a mesh-like silicone copolyol structure. Since the mineral-containing formulation makes a very thin film on the skin, minerals could be easily absorbed into stratum corneum. In 6 weeks in vivo test, it was found that the novel mineral formulation increased the amounts of amino acids, major components of natural moisturizing factors (NMFs), as well as levels of minerals. It was also found that the moisture contents and the brightness of the skin increased.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.795-796
• /
• 2010

Interest has been increasing worldwide in Fischer-Tropsch synthesis (F-T) as a method of producing synthetic liquid fuels from biomass. Hydroisomerization of $C_7-C_{15}$ paraffins applies to production of diesel fuel with high cetane number and improved cold flow properties, such as viscosity, pour point and freezing point. The commercial products such as fuel jet produced from F-T synthesis should have low freezing and pour points. In this study, our major aim is to develop a catalyst for hydroisomerization of synthesis-oil for bio-jet fuel. Effects of zeolites and platinum loading on hydroisomerization of dodecane were investigated as a model reaction in a batch reactor.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.449-455
• /
• 2021

Composite materials are substances that are configured to have excellent physical properties by combining the properties of a single substance, and are in the limelight as materials that exceed the performance of metals and polymers. However, it has the disadvantages of long cycle time and high unit price, and much research is being performed to overcome these disadvantages. In this study, we developed an epoxy resin curing agent that can shorten the time required for mass production of composite materials, and tried to expand the applicability of objections by imparting flame retardancy. The epoxy resin used as a basic substance utilized two types of bisphenol F and resorcinol structure, which was further modified using 9,10-dihydro-9-oxa-10-phosphaphenantrene-10-oxide (DOPO) to impart flame retardancy. Triethylphosphate (TEP) and bis [(5-ethyl-2-methyl-1,3,2-dioxaphosphorinan-5-yl)methyl] methyl phosphonate P,P'-dioxide (FR-001) were used as additives, seven kinds of compositions were blended, thermal characteristics (gelation time, glass transition temperature) and flame retardant performance were evaluated. We successfully developed an epoxy matrix that can be applied to high pressure resin transfer molding (HP-RTM) process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.196-196
• /
• 2003

현재 PDP(Plasma Display Panel) 상판의 유전체층은 저온에서 소성이 가능한 저융점 유리가 요구되기 때문에 융점을 낮추기에 용이한 PbO계가 주 성분으로 사용되어 오고 있으나. 최근 환경오염 등의 문제점으로 인해 Pb-free을 추구하는 새로운 유리조성의 연구가 많이 수행되고 있다. 이에 본 연구는 이미 PDP의 격벽과 봉착용 조성으로 많이 연구되어진 비스무스계 유리를 고려하여 PDP의 투명유전체용 조성을 찾고자 한다. Bi$_2$O$_3$-ZnO-SiO$_2$3원계를 기본으로 하는 유리조성에 유리망목형성제등을 첨가하여 열적특성과 광학적 특성을 조사하였다. 열적특성은 DTA를 이용하여 유리 전이 점(Tg) 및 융점(Tl)등을 측정하였고 TMA를 이용하여 선팽창계수(CTE)를 측정하였으며 유리섬유를 제조한 후 Littleton softening point (Ts)를 측정하였다. 광학적 특성은 페이스트를 제조하여 스크린프린팅 후 54$0^{\circ}C$~$600^{\circ}C$에서 1-2 h동안 소성하여 투광성을 조사하였다. 그 결과로, 열적특성으로는 400~5$50^{\circ}C$의 Tg, 450~$600^{\circ}C$의 Ts 및 5~11$\times$$10^{-6}$K의 CTE 값을 나타 내었고 광학적 특성으로 투광성은 양호한 특성(60% 이상)을 나타내었다. Bi$_2$O$_3$ 계를 현재 PDP의 투명유 전체에 적용시키기에는 유리용융시에 높은 점도와 환원 등의 문제점을 갖고 있지만 열적특성과 광학특성면에서는 가능성을 제시하여 향후 연구를 할 가치가 있다고 본다.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.282-287
• /
• 2008

Love wave is one of the shear horizontal waves and it can propagate between two layers in liquid without energy loss. The SAW (surface acoustic wave) sensor using Love wave is very useful for real time measurement of the viscosity of liquid with high sensitivity. In this study, the 77 MHz and 155 MHz Love wave SAW sensors were fabricated and use to measure the viscosity of low viscous liquid. To generate the surface acoustic wave, the inter-digital transducers were fabricated on the quartz crystal wafer. In order to obtain the optimal thickness of the coating film (novolac photoresist) generating the Love wave on the surface of SAW device, theoretical calculation was performed. The performances of fabricated Love wave SAW sensors were tested. As test liquid, pure water and glycerol solutions having different concentrations were used. Since the determination coefficients of the regression equations for measuring the viscosity of liquid are greater than 0.98, the developed Love wave SAW sensors in this study will be very useful for precise measurement of viscosity of liquid.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.51-63
• /
• 1999

The effects of high filler loading technique on the reliability of epoxy molding compound (EMC) as a microelectronic encapsulant was investigated. The method of high filler loading was established by the improvement of maximum packing fraction using the simplified packing model proposed by Ouchiyama, et al. With the maximum packing fraction of filler, the viscosity of EMC wart lowered and the flowability was improved. As the amount of filler in EMC increased, several properties such as internal stress and moisture absorption were improved. However, the adhesive strength with the alloy 42 leadframe decreased when the filler content was beyond the critical value. It was found that the appropriate content of filler was important to improve the reilability of EMC, and the optimum filler combination should be selected to obtain high reliable EMC filled with high volume fraction of filler.