• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2019

Here, we present a facile route to fabricate a vertically stacked 3D porous structure-based triboelectric nanogenerator (TENG) that can be used to harvest energy from the friction in a repetitive contact-separation mode. The unit component of TENG consists of thin Al foil electrodes integrated with microstructured 3D foams such as Ni, Cu, and polyurethane (PU), which provide advantageous tribo-surfaces specifically to increase the friction area to the elastomeric counter contact surfaces (i.e., polydimethylsiloxane, PDMS). The periodic contact/separation-induced triboelectric power generation from a single unit of the 3D porous structure-based TENG was up to $0.74mW/m^2$ under a mild condition. To demonstrate the potential applications of our approach, we applied our TENGs to small-scale devices, operating 48 LEDs and capacitors. We envision that this energy harvesting technology can be expanded to the applications of sustainably operating portable electronic devices in a simple and cost-effective manner by effectively harvesting wasted energy resources from the environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.77-86
• /
• 2020

Power quality problems caused by feeder voltage drop and extension construction cost problems can occur with the increasing utilization rates of the existing fixed-type EV (electric vehicle) charger. Moreover, EV users might not be able to access the EV charger due to a lack of EV charging facilities. Therefore, this paper proposes an MPSD (movable power supply device) for EVs to overcome user inconvenience caused by the insufficient number of chargers and extension cost issues. The proposed MPSD was mainly composed of a PV (photovoltaic) system, ESS (energy storage system), EV charging system, and monitoring and control system. Furthermore, there are three operation modes available to enhance the flexibility of the MPSD application, depending on the situation. This paper also presents an economical evaluation modeling using the present worth method to consider the cost and benefit elements. The simulation results based on proposed modeling showed that MPSD is more economical than the existing EV charger. Moreover, its profit can be increased significantly depending on the distance to the installation point.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.268-272
• /
• 2007

현재 시행되고 있는 하천정비와 하도정비는 하천 흐름의 특성을 간과한 채 일괄적으로 진행되어 왔으며 그 결과로 하천의 인공화는 지금까지 계속되고 있다. 이에 따라 하천 및 하도의 물리, 화학, 생물에 미치는 영향은 심각하며, 그 동안 인위적인 하천교란의 요인과 하천교란에 따른 영향, 즉 하상변동, 외래종 식생 침입, 생태서식처 변화 등의 정량적 평가 기술의 수립은 매우 미흡한 상태이다. 뿐만 아니라 하천 교란 극복을 위한 저감기술, 복원기술 및 적응관리 기술 또한 체계적으로 정리되지 못하여 하천과 댐 관리당국이 어려움을 겪고 있다. 이러한 상황을 극복하기 위해서는 하천 교란에 대항하는 회복관리 기술 개발을 위한 교란 평가 기술이 필요하다. 따라서 본 연구에서는 항공사진 및 GIS기법을 이용하여 국내 주요하천의 원인별 교란실태를 조사하고 분석함으로써 하천교란 조사기술 개발에 응용할 수 있는 방안을 제시하고자 하였다. 분석을 위하여 댐 하류의 하천교란 및 적응현장 시범지역을 선정한 후 대상 지역의 항공사진을 GIS화하여 하천 교란 실태를 분석하는 데에 필요한 자료를 생성하였으며 생성된 자료를 바탕으로 하천의 평면 및 단면의 변화특성을 조사할 수 있었다. 또한 경년별 저수로 형태와 하천 중심선 비교 분석을 통하여 저수로의 이동 및 변화 양상을 규명해 낼 수 있었으며 그 결과 댐 하류지역에서 하도안정문제가 발생하였음을 확인할 수 있었다. 본 연구 결과를 바탕으로 보다 효율적인 하도안정문제에 관한 대책수립이 가능하리라 보며, 이를 위해서는 하천 교란 조사기술 개발에 대한 연구가 뒤따라야 할 것이다.과적임을 알 수 있었다. 실험 결과 본 기법으로 유휴시간에 프로세서를 저전력모드로 바꾸는 기존의 고전적인 전력 관리 기법보다 전체 시스템 전력 소모를 9% 더 절약할 수 있었다. 위성영상과 DEM 개발기술이 87% 이상의 점수를 받아 가장 시장성 및 활용성이 높은 기술로 평가되었으며, 초다분광영상에 대한 기술은 70%를 겨우 넘는 수준에서 평가가 되었다. 멀티센서 공간영상정보 통합처리 기술 개발은 다목적 실용위성의 보유, 국가 NGIS 사업의 결과물이 상당히 축척이 되어 있고, 라이다(LiDAR) 기술의 도입을 위한 환경이 조성되었기에 다른 국가에 비해 멀티센서 기술의 적용과 산업화가 가시화 될 수 있을 것으로 기대된다. 그러나 멀티센서 자료의 수급이 용이하지 못하고, 법 제도적인 한계, 시장의 성숙도가 기대이하라는 점 등의 한계를 노정하고 있다.a var. sieboldii 3. Pinus densiflora, Q. aliena, Q. acutissima, P. thunbergii, Q. acuta 4. Carpinus laxiflora, Camellia japonicas. C. tschonoskii community의 5개 그룹으로 나타났다. 하류의 부착돌말류는 상대적으로 양호한 수질을 가지고 있는 정점 1에서 다양한 생물상을, 탄천의 영향을 받는 정점 2는 상대적으로 수질이 악화되어 호오염성 종들이 높은 분포를 나타내고 있었다. 또한 부착돌말류 중 Cymbella minuta는 다른 부착돌말류에 비해 강한 오염지표성을 나타내고 있었다.p=0.000, $4.76{\pm}3.31$

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.654-661
• /
• 2021

Air pollution caused by industrial development has become a level that can seriously threaten human health. In general, indoor air pollution is considered to be lower than outdoors, but modern people live indoors most of the time, thus it is essential to keep the indoor air quality comfortable in order to take care of one's own health and improve the quality of life. Therefore, the development of an indoor environment management platform using Internet of Things and data processing technology, which is currently drawing attention, is considered a very meaningful study. In this paper, we designed an IoT-based management platform that can remotely monitor and control indoor environments. In addition, the functions of the IoT terminal, gateway, and data server constituting the platform were implemented using open source and open libraries, and all functional operations were also verified. In particular, the IoT terminal and the gateway in this paper exchange data using BLE communication, so they can operate with relatively low power and since the gateway uses the BLE Advertising mode, it has the advantage of automatically recognizing IoT terminals that have not been previously configured.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.21-31
• /
• 2010

This paper presents a design of PLL and SSCG for reducing the EMI effect at the electronic machinery and tools for DisplayPort application. This system is composed of the essential element of PLL and Charge-Pump2 and Reference Clock Divider to implement the SSCG operation. In this paper, 270MHz/162MHz dual-mode PLL that can provide 10-phase and 1.35GHz/810MHz PLL that can reduce the jitter are designed for 2.7Gbps/162Gbps DisplayPort application. The jitter can be reduced drastically by combining 270MHz/162MHz PLL with 2-stage 5 to 1 serializer and 1.35GHz PLL with 2 to 1 serializer. This paper propose the frequency divider topology which can share the divider between modes and guarantee the 50% duty ratio. And, the output current mismatch can be reduced by using the proposed charge-pump topology. It is implemented using 0.13 um CMOS process and die areas of 270MHz/162MHz PLL and 1.35GHz/810MHz PLL are $650um\;{\times}\;500um$ and $600um\;{\times}\;500um$, respectively. The VCO tuning range of 270 MHz/162 MHz PLL is 330 MHz and the phase noise is -114 dBc/Hz at 1 MHz offset. The measured SSCG down spread amplitude is 0.5% and modulation frequency is 31kHz. The total power consumption is 48mW.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.