• Journal of KIISE:Software and Applications
• /
• v.37 no.11
• /
• pp.845-850
• /
• 2010

Incremental parsing has been developed to reuse the parse result of the original string during the parsing of a new string. The previous incremental LL(1) parsing methods precomputed the reusable point information before parsing and used it during parsing. This paper proposes an efficient reusable point computation by factoring the common part of the computation. The common symbol storing method and the distance storing method were previously suggested to find the reusable point, and by combining the methods, this paper gives the storing method of the distance to common symbols. Based on it, an efficient incremental LL(1) parser is constructed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.3
• /
• pp.31-38
• /
• 1993

The storage ring vacuum system for the Pohang Light Source (PLS) has been designed to maintain the vacuum pressure of $10^{-10}Torr$ which requires UHV welding to have helium leak rate less than $1{\times}10^{-10}Torr{\cdot}{\ell}/sec$. In order to develop new technique (PLS) welding technique), a prototype vacuum chamber has been welded by using Tungsten Inert Gas welding method and all the welded joints have been tested with a non-destructive method, so called helium leak detection, to investigate the vacuum tightness of the weld joints. The test was performed with a detection limit of $1{\times}10^{-10}Torr{\cdot}{\ell}/sec$ for helium and no detectable leaks were found for all the welded joints. Thus the performance of welding technique is proven to meet the criteria of helium leak rate required in the PLS Storage Ring. Both the principle and the procedure for the helium leak detection are also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.809-814
• /
• 2012

We propose an adaptive threshold detector algorithm for multi-level holographic data storage based on the expectation-maximization (EM) method. In this paper, the signal intensities that are passed through the four-level holographic channel are modeled as a four Gaussian mixture with unknown DC offsets and the threshold levels are estimated based on the maximum likelihood criterion. We compare the bit error rate (BER) performance of the proposed algorithm with the non-adaptive threshold detection algorithm for various levels of DC offset and misalignments. Our proposed algorithm shows consistently acceptable performance when the DC offset variance is fixed or the misalignments are lower than 20%. When the DC offset varies with each page, the BER of the proposed method is acceptable when the misalignments are lower than 10% and DC offset variance is 0.001.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.323-326
• /
• 2002

본 논문은 웹 상에서의 데이터 교환 및 정보 전달은 물론 분산 환경 내에 산재한 어플리케이션들 간의 통신 및 정보 시스템들 간의 상호 운용을 지원하는 CORBA 기반의 XML 정보 관리 시스템을 설계한다. 최근 웹 상에서 정보교환을 통해 다양한 업무들을 효율적으로 처리하려 함에 따라 분산 환경에서의 컴퍼넌트 기반과 웹 기반 어플리케이션들의 연동이 요구된다. 그러나, 이러한 어플리케이션들의 연동 시 직접적인 호환성이 결여되어 별도의 프로토콜 지원이 필요하다. 따라서, 본 논문에서는 이러한 호환성 문제를 해결하기 위해 XML을 사용하여 플랫폼 및 프로그래밍 언어에 대한 독려성과 확장성을 제공하고, 객체 직렬화를 통해 직렬화된 XML 문서를 CORBA의 IIOP를 이용해 전송함으로써 데이터 교환 및 공유가 가능하도록 지원하는 XML 정보 관리 시스템을 설계한다. 제안된 시스템은 윈 상에서의 정보 교환 및 공유를 지원함으로써 보다 유연한 정보 교류 환경을 제공하고, 이질적인 어플리케이션들로 구성된 비즈니스 로직들 사이의 정보 처리에 있어 상호 운용성을 지원하여 효율적인 업무 처리가 가능하도록 한다. 또한, XML20RDB 저장기와 ORDB2XML 생성기를 구성 모듈로 설계하여 웹 상에서의 모든 정보를 공통 포맷인 XML 형태로 저장 및 관리함으로써 정보의 재사용성 및 효율적인 관리를 유도한다.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.163-168
• /
• 1992

Results of magnetic measurement of a prototype Storage Ring dipole magnet for the Pohang Light Source (PLS) are summarized. Hall probe mapping and rotating coil methods are used to measure field profiles and integrated field properties. End chamfering experiments are performed on the as-built magnet, which has four removable pole-end pieces, to meet the specifications set from beam dy-namics requirement. The corrected magnet has efficiency of 99.7% at 2.0 GeV excitation ad higher order multipole error levels less than the specifications for all excitations, showing that the magnet has appropriate properties for the PLS Storage Ring.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.1124-1127
• /
• 2021

대형마트 혹은 일반 마트에서 물건을 구매할 때 지금까지 얼마치의 물건을 담았는지 소비자들은 알기 어렵다. 그리고 여러 사람들이 많은 물건을 한 번에 구매하기 때문에 계산대에서 길게 늘어진 줄을 보고 최대한 사람이 적은 곳을 찾은 경험은 다들 있을 것이다. 그러한 점에서 최근 조금씩 늘어나는 무인 계산대에서 아이디어를 얻어 쇼핑을 할 때 끌고 다니는 카트에서 계산과정을 처리해 계산시간을 줄이고자 했다. 그러하여 카트에서 물건을 인식할 수 있어야 하며 인식한 물건의 가격 및 정보 등을 저장하고 있어야한다. 그래서 카트에 바코드를 인식할 수 있는 리더기와 가격정보를 보여 주는 스크린을 설치하였으며 계산대에 가서 저장했던 정보를 한 번에 처리기위해 QR 코드를 사용하였다. 스크린에 QR 코드를 띄우고 계산대에서 QR 코드를 찍으면 가격정보를 알 수 있고 그 자리에서 계산까지 가능하며 원하는 소비자는 본인의 휴대폰에 설치된 가계부에서도 QR 코드를 찍어서 구매한 물건들의 가격과 자세한 구매목록을 쉽게 저장할 수 있다. 기존 가계부에서는 구매목록을 하나하나 적어야 하기 때문에 귀찮을 수 있지만 이러한 방법을 통하면 기존방식보다 훨씬 편리할 것이라 생각했다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.4
• /
• pp.413-426
• /
• 2014

This study was conducted to investigate changes of physicochemical properties and fatty acid compositions of rough rice stored at different storage temperatures and periods. So we analyzed texture, alkali digestion value (ADV), toyo glossiness value, pasting properties, fat acidity and fatty acid compositions of five rice varieties every 4 month on the condition of which rough rice had been stored at different temperatures (ambient and low temperature condition at $15^{\circ}C$) for 2 years. Hardness of cooked rice was increased by storage periods and cohesiveness of cooked rice was not considerably different among varieties according to storage temperatures and periods. ADV was significantly different among varieties and storage periods but not different with storage temperatures. Toyo glossiness value of cooked rice was continuously decreased from 4 months after storage regardless to storage temperature. The pasting properties were considerably affected by storage temperatures and periods of rough rice. Increase in peak viscosity, final viscosity and breakdown was observed but setback was decreased by storage periods. Fat acidity of brown rice was much higher than that of milled rice during storage of rough rice and tend to increase by storage period. Oleic acid among fatty acids of brown rice except Sindongin and Hitomebore tended to be decreased by storage periods and linoleic acid among fatty acids of brown rice of Hopum was decreased by storage periods. The contents of linoleinic acid and stearic acid among fatty acids of milled rice were comparatively decreased from 4 months after storage, whereas the content of palmitic acid tended to be increased by storage periods.

• Food Science and Preservation
• /
• v.10 no.4
• /
• pp.447-453
• /
• 2003

Causal factors related to the skin disorder such as black stains during cold storage of 'Niitaka' pear fruit are of great importance to solve the postharvest disorder problems. The morphological and biochemical changes observe of pear skin affected by different harvest times and storage environments. Occurrence rate of black stain in 'Niitaka' pear fruit was the highest in newspaper bagging with 75% among various bagging materials at harvest time because of the high relative humidity within the double layer paper bags. During cold storage, the rate was 54～100% in 30 $\mu\textrm{m}$ polyethylene (PE) film packaging. As the harvest time was postponed, the rate increasedduring cold stoinge. The into was 1.5 to 2.4 times higher in pears harvested in late September than in those harvested in early and mid October. There was no significant difference in occurrence of black stain fruit between the 30 and 50 $\mu\textrm{m}$ PE film bags. The causal fungus of the black stain pear was assumed as Gloeodes pomigena (Schweintz, 1920). The treatment of 0.1～0.5 ppm ozone gas prevented the occurrence of the pear fruit black stain until 180 days after cold storage. The ozone treatment on the affected fruit was also effective in preventing the progress of the black stain.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.58-64
• /
• 2000

Assuming that the performance of holographic storage media is ideal, we estimate the area storage density of disk-type holographic memories, when the method of either angle multiplexing, or rotational multiplexing, or both are used. The area storage density is strongly dependent on the f numbers (ratio of focal length to diameter) of both the Fourier transform lens in the signal arm, denoted by $F/#_2$, and the angle range over which the reference beam is incident (or, the equivalent f number corresponding to the angle range denoted by $F/#_1$). The area storage density is largely independent of the pixel pitch of the spatial light modulator when the Fourier plane holograms are recorded, while it is sensitive to the pixel pitch when the image plane holograms are recorded. In general, to obtain high area storage density, the Fourier or at least near Fourier plane holograms rather than the image plane holograms should be recorded. In addition, when the thickness of the recording materials are less than approximately $500\mu\extrm{m}$, rotational multiplexing gives higher area storage densities than angle multiplexing does. To increase the storage density further, however, it is desirable to use both of the two multiplexing methods in combination.nation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.37-42
• /
• 2022

Recently, with the development of mobile communication technologies such as 5G, interest in oscilloscope technology based on high bandwidth and user-friendly UI is increasing. In this paper, we proposed a Python-based UI(user interface) SW for a high-bandwidth digital oscilloscope in connection with the study of a 13GHz band digital oscilloscope system. The proposed UI SW is designed not only to be executed integrally with the oscilloscope, but also to be run on a separate PC or laptop cooperating with the instrument through WiFi communication. Functions of the UI SW consists of displaying and analyzing signal data, storing signal data in an external storage device, generating test signal data, and reconfiguring the toolbar. Finally, we have shown that the proposed digital oscilloscope system operates normally by interworking test with the signal generator.