• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.190-195
• /
• 2000

This paper presents the fabrication of the LNA which is operating at 2.13∼2.16 GHz for IMT-2000 lot-end receiver using series feedback and resistive decoupling circuit. Series feedback added to the source lead of a transistor keep the low noise characteristics and drop the input reflection coefficient of amplifier simultaneously. Also, it increases the stability of the LNA. Resistive decoupling circuit is suitable for input stage matching because a signal at low frequency is dissipated by a resistor in the matching network The amplifier consist of GaAs FET ATF-10136 for low noise stage and VNA-25 which is internally matched MMIC for high gain stage. The amplifier is fabricated with both the RF circuits and self bias circuit on the Teflon substrate with 3.5 permittivity. The measured results of the LNA which is fabricated using above design technique are presented more than 30 dB in gain P$\_$ldB/ 17 dB and less than 0.7 dB in noise figure, 1.5 in input$.$output SWR(Standing Wave Ratio).

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.183-186
• /
• 2000

본 논문에서는 잡음에 적합한 능동 정합 회로를 구성하여 기존의 보상 정합 회로와 궤환 회로를 적용함으로써 L. S 밴드(1-4GHz) 내에서 균일한 이득 특성과 작은 반사 손실을 갖는 광대역 저잡음 증폭기를 설계하였다. 설계된 중폭기는 대역 내에서 14.25-14.96dB의 소신호 이득과 1.41, 1.28 이하의 입, 출력 정재파비를 갖는다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.196-199
• /
• 2000

In this paper, we have designed a low-noise amplifier for the down-converter to apply the K-band Mu-kung-hwa satellite downconvertion. We have designed on three-stage to satisfy the property of low-noise amplifier for the down-converter required at least 30dB gain. The simulaition results for the designed three-stage Low-noise amplifier are measured that 33dB, gain and 0.93dB, noise-figure From 19.200 to 20.200, and The experiment results of the fabric are measured that 25dB, gain and 1.5dB, noise-figure. Since Input reflection coefficient and otput resection coefficient are -25dB and -28dB, respectively, and VSWR is lower than 1.5, this amplifier can be used as a low-noise amplifier for the down-converter to apply the K-band Mu-kung-hwa satellite downconvertion.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.4
• /
• pp.17-24
• /
• 1972

A simply constructed and inexpensive amplifier that exhibits unusually low noise is studied. The high-performance differential amplifier combines high input impedence, adjustable gain, low in put noise and low output impedance. The amplifier is particularly useful in applications which call for large amplificaions of very low level signals.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.630-634
• /
• 2004

This paper describes the design of a two stage 1V power supply SiGe Low Noise Amplifier operating at 5.25 GHa for 802.lla wireless LAN application. The achieved performance includes a gain of 17 ㏈, noise figure of 2.7㏈, reflection coefficient of 15 ㏈, IIP3 of -5 ㏈m, and 1-㏈ compression point of -14㏈m. The total power consumption of the circuit was 7 mW including 0.5mW for the bias circuit.