• 제목/요약/키워드: 저울

검색결과 138건 처리시간 0.024초

감습 고분자막이 코팅된 수정미소저울 습도센서 제작 및 특성연구 (Development of a hygroscopic polymer-coated QCM humidity sensor and its characteristics)

  • 권수용;김종철;최병일;남현수
    • 센서학회지
    • /
    • 제14권6호
    • /
    • pp.395-401
    • /
    • 2005
  • A highly stable quartz crystal microbalance (QCM) that showed a stability of frequencies and exhibited a very low noise level has been developed. The long-term drift was <0.05 Hz/h over a period of 10 h, and the short-term rms (root mean square) noise was <0.015 Hz. Our QCM sensor was used as a humidity sensor employing a poly(methyl methacrylate) (PMMA) polymer film as a hygroscopic layer, which showed good characteristics in the relative humidity (RH) range of $2{\sim}90%$ RH. Comparing the characteristics of the QCM sensor with those of other types of humidity sensors employing PMMA film as a hygroscopic layer, and with other QCM sensors employing other hygroscopic layers is represented.

무전해 팔라듐-인 도금의 석출속도에 미치는 에틸렌디아민 농도의 영향 (Effect of Ethylenediamine Concentraion on Precipitation Rate of Electroless Palladium-Phosphorous Plating)

  • 배성화;한세훈;손인준
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2017년도 춘계학술대회 논문집
    • /
    • pp.128-128
    • /
    • 2017
  • 무전해 도금이란 외부의 전원을 사용하지 않고 환원제를 이용하여 금속 피막을 석출시키는 방법이다. 이러한 무전해 도금은 최근에 와서 인쇄회로기판(printed circuit board)등 다양한 전자부품에 적용되고 있다. 최근 급격한 금 가격 상승으로 인해 전자부품용에 사용되는 금의 사용량을 감소시키거나 또는 금을 대체할 수 있는 도금 층에 관한 연구가 활발하게 진행되고 있다. 금을 대체할 수 있는 즉 비용 경감의 가능성이 있는 도금 재료로는 팔라듐이 유력하다. 팔라듐은 금의 약 1/2가격으로 우수한 내식성 및 낮은 접촉저항을 가지기 때문에 접점재료로서 오래전부터 사용되어져왔다. 무전해 팔라듐-인 도금의 착화제, 환원제, 경도, 접촉저항에 대한 연구는 많이 있지만 도금속도에 미치는 인자에 대해서는 명확하지 않은 것이 많다. 따라서 본 연구는 무전해 팔라듐-인 도금의 석출석도에 미치는 에틸렌디아민 농도의 영향에 대하여 조사하였다. 실험방법으로는 환원제로 차아인산을 사용하고 착화제로는 에틸렌디아민을 사용하여 문전해 팔라듐-인 도금액을 제조하였다. 에틸렌디아민의 농도는 각각 5ml/L, 7.5ml/L, 10ml/L, 12ml/L로 하였다. pH는 7.5, 온도는 $45^{\circ}C$로 하여 30분 동안 도금을 실시하였다. 무전해 팔라듐-인 도금속도는 정밀저울로 무게를 측정하였고 ICP-OES을 사용하여 도금층의 농도를 분석, XRF를 사용하여 성분분석과 XRD를 사용해 결정회절을 분석하였다. 또한 SEM을 사용하여 단면 관찰을 하였으며 석출속도에 미치는 에틸렌디아민의 영향을 전기화학 분극곡선을 통해서 고찰을 시도해 보았다.

  • PDF

Protein G를 포함하는 수정미소저울 센서 칩과 정제되지 않은 항혈청을 이용한 헵토글로빈과 트랜스페린의 면역분석 (Immunoassay of haptoglobin and transferrin with proteinG-containing QCM sensor chip and unpurified antiserum)

  • 하인영;최석정
    • 센서학회지
    • /
    • 제17권5호
    • /
    • pp.380-386
    • /
    • 2008
  • Quartz crystal microbalance immunosensor has a capacity to perform a label-free and real time detection of a trace amount of analyte through the specific interaction between antibody and antigen. However, immobilization of antibody molecules on the sensor surface is a troublesome procedure for researchers who are not experienced in chemistry. Protein G has a specific affinity to antibody and would serve as a capturing agent for antibody when immobilized on the sensor surface. In this work, we prepared a protein G sensor chip by immobilizing protein G on the surface of quartz crystal microbalance and examined its capability to detect human haptoglobin or human transferrin with unpurified corresponding antiserum. Specific and dose dependent response was observed when the protein G chip was used for detection of antigens after saturated with antiserum. We also verified several advantageous aspects of the protein G chip such as improved flexibility and sensitivity.

수정미소저울 노점센서 제작 및 반응특성 연구 (Development of QCM dew point sensor and its sensing characteristics study)

  • 권수용;김종철;최병일
    • 센서학회지
    • /
    • 제15권4호
    • /
    • pp.269-276
    • /
    • 2006
  • This paper represents development of quartz crystal microbalance (QCM) and usage as a dew point sensor. The temperature of a quartz resonator was controlled precisely from $20^{\circ}C$ to $-30^{\circ}C$ with the ramping rate of $0.1^{\circ}C/s$ by using a custom-made crystal holder housing the quartz resonator associated with a thermoelectric cooler (Peltier cooler), which results in the working range from $15.2^{\circ}C$ to $-24.0^{\circ}C$ based on an accurate holder temperature compensation and temperature effect compensation process. The developed QCM dew point sensor and analysis techniques show very good sensing characteristics at measurement of moist air with the relative humidity from 10 %R.H. to 90 %R.H. generated by a divided-type humidity generator and the dew point temperatures were determined with an accuracy of less than ${\pm}0.18^{\circ}C$, which also showed good agreement with reference values in their error range.

전자빔 가열로 발생시킨 Gd 원자증기의 속도에 관한 연구 (Study on the velocity of gadolinium atomic vapor produced by electron beam heating)

  • 정의창;권덕희;고광훈;김택수
    • 한국진공학회지
    • /
    • 제12권4호
    • /
    • pp.228-234
    • /
    • 2003
  • 전자빔으로 증발시킨 gadolinium(Gd) 원자증기의 속도를 미량 저울(microbalance)을 사용하여 측정하였다. 증발 표면의 온도가 2400-2500 K인 조건에서 약 900 ㎧의 속도가 측정되었다. 이 값은 단열팽창을 하는 이상적 단원자의 최대 속도에 비해 약 100 ㎧ 더 빠른 속도에 해당된다. 이 특이 현상의 원인을 고온에서 여러 개의 들뜬 에너지 준위에 분포한 Gd 원자의 내부 에너지가 단열팽창 중에 운동 에너지로 전환되는 것으로 설명하였다. 100개의 들뜬 에너지 준위를 원자증기의 엔탈피에 포함시켜 속도를 계산한 값이 실험 결과와 비교적 일치함을 보였다. 가열된 표면 온도의 변화에 따른 원자증기의 유동 특성에 대해서도 보고한다.

변형률 및 진동 측정 교육을 위한 실험 장치와 실험 포트폴리오 (Test Equipment and Test Portfolio for Education of Strain and Vibration Measurements)

  • 양지민;이두열
    • 실천공학교육논문지
    • /
    • 제13권3호
    • /
    • pp.497-505
    • /
    • 2021
  • 재료의 변형률과 진동 측정을 실습하기 위한 외팔보 형태의 실험 장치를 개발하였다. 주변에서 구할 수 있는 재료와 저렴한 제어기를 사용하여 제작하였다. 철재 자로 된 외팔보에 서로 다른 위치에 변형률게이지를 설치하여 외부 하중에 따른 보의 변형률을 측정할 수 있도록 구성하였다. 전자석으로 외팔보를 가진하며, 함수발생기로 원하는 주파수로 외팔보에 진동이 발생하도록 하였다. 장치를 사용하여 수행이 가능한 세 가지 실험을 제시하였으며, 각각 저울 만들기 시험, 외팔보의 공진주파수 측정 실험, 그리고 가진주파수와 측정 주파수의 차이를 구하는 실험이다. 간단하면서도 저렴하게 만들 수 있는 실험 장치와 실험 포트폴리오를 통해 효과적인 하중 및 진동 측정 교육 수행이 가능할 것으로 기대된다.

Slit-jet 노즐을 통해 분사되는 초음파 무화 케로신 화염의 정상초음파 가진에 의한 거동 변이 (Behavioral Change of the Ultrasonic Standing Wave-affected Flame in the Reaction Zone of the Ultrasonically-atomized Kerosene Injected through a Slit-jet Nozzle)

  • 배창한;강윤형;안현종;김정수
    • 한국추진공학회지
    • /
    • 제26권1호
    • /
    • pp.60-67
    • /
    • 2022
  • 본 연구는 정상초음파 가진 유무에 따른 초음파 무화 케로신 화염의 거동변이를 분석하기 위해 수행되었다. Slit-jet 노즐을 통과하며 생성된 연소영역은 DSLR, ICCD 및 초고속카메라와 슐리렌 기법을 통해 가시화되었고, 연료소모량은 정밀저울을 통해 측정하였다. 그 결과, 정상초음파 가진시, OH 라디칼의 강도가 증가하는 것이 관찰되었고 정상파장 상단부에서 최적 연소 조건이 형성됨을 확인하였다.

정상초음파장의 위치에 따른 초음파 무화 케로신 부상화염의 거동 (A Behavior of the Ultrasonically-atomized Kerosene Lifted-flame According to the Position of Ultrasonic Standing-wave Field)

  • 배창한;김정수
    • 한국추진공학회지
    • /
    • 제27권1호
    • /
    • pp.1-8
    • /
    • 2023
  • 본 연구는 수송기체 유량 및 정상초음파장의 가진 위치에 따른 초음파 무화 케로신 화염의 거동을 분석하기 위해 수행되었다. Slit-jet 노즐을 빠져나오는 에어로졸의 연소장은 DSLR, ICCD 및 초고속 카메라와 슐리렌 기법을 통해 가시화되었으며, 연료소모량은 정밀저울을 통해 측정되었다. 그 결과, 정상초음파장 경계영역에서 화염이 갇히고, 정상초음파장의 위치가 높아질수록 연료소모량은 감소하였다.

가금류 농장에 적용 가능한 이동식 중량 저울에 관한 연구 (A Study on Portable Weighing Scales Applicable to Poultry Farms)

  • 박성진;박인지;김진영
    • 한국전기전자재료학회논문지
    • /
    • 제35권2호
    • /
    • pp.155-159
    • /
    • 2022
  • Smart livestock, which combines information and communication technology (ICT) with livestock, can be said to be an effective solution to existing livestock problems such as productivity improvement, odors, and diseases. So far, it has hardly been universalized; thus, it is necessary to develop automation devices to reduce labor by localizing automation devices to expand the distribution of ICT technology to farms, and to advance precise specifications and health management technology using biometric information. Weighing scales currently being used in livestock farms are to prevent the spread of diseases by diagnosis and preparation for AI and other diseases in advance, using information on the growing weight of duck breeding. However, accurate values cannot be obtained due to poor breeding conditions. In this paper, we developed a separate data transmission system kit for the weighing scale and placed the sensor on top of the weighing scale so that the sensor wire is not affected by pollutants or ducks on the floor. A display function was provided, and a method of receiving and analyzing the serial port data of the weighing device, and then transmitting them to the data collection server was implemented.

자기공명영상 기술을 이용한 저장 중 키위의 내부 변화 연구 (Study on the Interanal Physical Changes of Kiwi Fruit Using Magnetic Resonance Imaging Technique)

  • 백승훈;김명호;최규홍;김성민
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2017년도 춘계공동학술대회
    • /
    • pp.96-96
    • /
    • 2017
  • 농산물 수확 이후 저장 유통 과정에서 일어나는 생리적 현상 변화에 따른 내부품질의 측정 분석연구가 활발히 진행되고 있다. 이 연구에서는 비파괴 측정 방법들 중 하나인 자기공명영상(Magnetic Resonance Imaging, MRI) 기술을 활용하여 후숙 과일인 키위의 저장 일수에 따른 형태 및 내부 구조의 변화를 조사하였다. 공시재료는 국내에서 판매되고 있는 키위들 중 3품종(뉴질랜드산 Sun Gold, 뉴질랜드산 Green, 칠레산 Jin Green)별로 균일한 크기의 과일 5개씩을 이용하였으며, 시료를 실험실내($16.6^{\circ}C$, 38% RH)에서 18~19 일간 보관하면서 3~5일 간격으로 5회 시험하였다. 전북대 농업과학기술연구소가 보유하고 있는 MRI(M10, Aspect Imaging, Israel)를 활용하여 영상 이미지를 얻었으며, 저장 기간에 따른 무게 감소는 전자저울(한성, HK-series)을 이용하였다. 자기공명영상 이미지는 Gradient-Eco 펄스열을 사용하였고, 횡단면(Axial)의 영상면(Image-direction)을 중심으로 영상영역(Field of View, FOV)은 $80mm{\times}80mm$로 1회 촬영 할 때 마다 30개의 영상들을 얻었다. 저장 기간이 길어질수록 내부 공동현상이 커지는 것으로 나타났고, 뉴질랜드산 Sun Gold 품종은 다른 두 품종보다 내부 공동이 빠르게 나타났다. 실험이 끝나는 날에는 껍질이 연화되어 타원형의 형체를 계속 유지하지 못하고 붕괴되는 이미지를 MRI를 통해서 관찰 할 수 있었다. 시간이 지남에 따라 영상들의 위치가 일정하지 않고 일부 회전을 한 것처럼 나타났다. 이는 키위 전용 홀더를 만들어 고정하지 않고 측정하다보니 생긴 오차로 생각 되었다. 키위를 건조한 공간에 오래 보관하였기 때문에 시간이 지남에 따라 수분증발과 연화된 껍질 사이로 과육이 흘러 일부를 제외한 대부분의 키위 무게가 일정하게 감소하는 것을 알 수 있었다.

  • PDF