DOI QR코드

DOI QR Code

Development of a hygroscopic polymer-coated QCM humidity sensor and its characteristics

감습 고분자막이 코팅된 수정미소저울 습도센서 제작 및 특성연구

  • Kwon, Su-Yong (Temperature-Humidity Group, Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Kim, Jong-Chul (Temperature-Humidity Group, Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Choi, Byung-Il (Temperature-Humidity Group, Division of Physical Metrology, Korea Research Institute of Standards and Science) ;
  • Nham, Hyun-Soo (Temperature-Humidity Group, Division of Physical Metrology, Korea Research Institute of Standards and Science)
  • 권수용 (한국표준과학연구원 물리표준부 온습도그룹) ;
  • 김종철 (한국표준과학연구원 물리표준부 온습도그룹) ;
  • 최병일 (한국표준과학연구원 물리표준부 온습도그룹) ;
  • 남현수 (한국표준과학연구원 물리표준부 온습도그룹)
  • Published : 2005.11.30

Abstract

A highly stable quartz crystal microbalance (QCM) that showed a stability of frequencies and exhibited a very low noise level has been developed. The long-term drift was <0.05 Hz/h over a period of 10 h, and the short-term rms (root mean square) noise was <0.015 Hz. Our QCM sensor was used as a humidity sensor employing a poly(methyl methacrylate) (PMMA) polymer film as a hygroscopic layer, which showed good characteristics in the relative humidity (RH) range of $2{\sim}90%$ RH. Comparing the characteristics of the QCM sensor with those of other types of humidity sensors employing PMMA film as a hygroscopic layer, and with other QCM sensors employing other hygroscopic layers is represented.

Keywords

References

  1. N. Yamazoe and Y. Shimizu, 'Humidity sensors: principles and applications', Sens. Actuators, vol. 10, pp. 379-398, 1968
  2. Y. Sakai, M. Matsuguchi, and T. Hurukawa, 'Humidity sensor using cross-linked poly(chloromethyl styrene)', Sens. Actuators B, vol. 66, pp. 135-138, 2000 https://doi.org/10.1016/S0925-4005(00)00313-0
  3. R. Anchisini, G Faglia, M. C. Gallazzi, G Sberveglier, and G. Zerbi, 'Polyphosphazene membrane as a very sensitive resistive and capacitive humidity sensor', Sens. Actuators B, vol. 35, pp. 99-102, 1996 https://doi.org/10.1016/S0925-4005(97)80037-8
  4. T. E. Brook, M. N. Taib, and R. Narayanaswamy, 'Extending the range of a fibre-optic relative-humidity sensor', Sens. Actuators B, vol. 39, pp. 272-276, 1997 https://doi.org/10.1016/S0925-4005(97)80217-1
  5. S. P. Lee and K. J. Park, 'Humidity sensitive field effect transisters', Sens. Actuators B, vol. 35, pp. 80-84, 1996 https://doi.org/10.1016/S0925-4005(96)02018-7
  6. K. A. 'Vetelino, P. R. Story, R. D. Mileham, and D. W. Galipeau, 'Improved dew point measurements based on a SAW sensor', Sens. Actuators B, vol. 35, pp. 91-98, 1996 https://doi.org/10.1016/S0925-4005(96)02020-5
  7. M. Neshkiva, R. Petrova, and V. Petrov, 'Piezoelectric quartz crystal humidity sensor using chemically modified nitrated polystyrene as water sorbing coating', Anal. Chim. Acta, vol. 332, pp. 93-103,1996 https://doi.org/10.1016/0003-2670(96)00119-5
  8. L. X. Sun and T. Okada, 'Simultaneous determination of the concentration of methanol and relative humidity based on a sing Nafion(Ag)-coated quartz crystal micbrobalance', Anal. Chim. Acta, vol. 421, pp. 83-92, 2000 https://doi.org/10.1016/S0003-2670(00)01030-8
  9. S. Mintova and T. Bein, 'Nanosized zeolite films for vapor-sensing applications', Micropor. Mesopor. Mater., vol 50, pp. 159-166, 2001 https://doi.org/10.1016/S1387-1811(01)00443-7
  10. G. Sauerbrey, 'Verwendung von Schwingquarzen zur Wagung dunner Schichten und zur Mikrowagung', Z. Phys., vol. 155, pp. 206-222, 1959 https://doi.org/10.1007/BF01337937
  11. 이성필, 임재경, 윤여경, 'PMMA를 이용한 저항형 습도감지 소자”, 센서학회지, 제l권, 제l호, pp. 125-130, 1992
  12. H. W. Chen, R. J. Wu, K. H. Chan, Y. L. Sun, and P. G. Su, 'The application of CNT/nafion composite material to low humidity sensing measurement', Sens. Actuators B, vol. 104, pp. 80-84, 2005 https://doi.org/10.1016/j.snb.2004.04.105
  13. H. Kusano, S. Kimura, M. Kitagawa, and H. Kobayashi, 'Application of cellulose langmuir-blodgett films as humidity sensors, and characteristic of the sorption of water molecules into polymer mono layers', Thin Solid Films, vol. 295, pp. 53-59, 199 https://doi.org/10.1016/S0040-6090(96)09171-7
  14. E. Radeva, V. Georgiev, L. Spassove, N. Koprinarov, and St. Kanev, 'Humidity adsorptive properties of thin fullerene layers studied by means of quartz micro-balance', Sens. Actuators B, vol. 42, pp. 11-13, 1997 https://doi.org/10.1016/S0925-4005(97)80306-1
  15. G. C. Herdt, A. W. Czanderna, and D. E. King, 'Adsorption of water onto mercaptohexadecanoic acid self-assembled mono layers using a quartz crystal microbalance', Surface Science, vol. 355, pp. L371-L374, 1996 https://doi.org/10.1016/0039-6028(95)01375-X
  16. M. Neshkova, R. Petrova, and V. Petrov, 'Piezoelectric quartz crystal humidity sensor using chemically modified nitrated polystyrene as water sorbing coating', Analytica Chemica Acta, vol. 332, pp. 93-103, 1996 https://doi.org/10.1016/0003-2670(96)00119-5
  17. M. Matsuguchi, Y. Sadaoka, and Y. Sakai, 'A Capacitive-type humidity sensor using cross-linked poly(methyl methacrylate) thin films', J Electrochem. Soc., vol. 138, pp. 1862-1865, 1991 https://doi.org/10.1149/1.2085886
  18. C. Roman, O. Bodea, N. Prodan, A. Levi, E. Corodos, and I. Manoviciu, 'A capacitive-type humidity sensor using crosslinked poly(methyl methacrylate-co-(2 hydroxypropyl)-methacrylate)', Sens. Actuators B, vol. 24-25, pp. 710-713, 1995
  19. A. R. K. Ralston, J. A. Tobin, S. S. Bajikar, and D. D. Denton, 'Comparative performance of linear, cross-linked, and plasma-deposited PMMA capacitive humidity sensors', Sens. Actuators B, vol. 22, pp. 139-147, 1994 https://doi.org/10.1016/0925-4005(94)87013-6
  20. M. Matsuguchi, M. Yoshida, T. Kuroiwa, and T. Ogura, 'Depression of a capacitive-type humidity sensor's drift by introducing a cross-linked structure in the sensing polymer', Sens. Actuators B, vol. 102, pp. 97-101, 2004 https://doi.org/10.1016/j.snb.2003.12.061
  21. 권현정, 이영진, 장용근, 김종득, '수정진동자를 이용한 프탈로시아닌 LB 박막의 $NO_2$ 감지특성', 센서학회지, 제7권, 제4호, pp. 254-262, 1998
  22. M. Matsuguchi, S. Umeda, Y. Sadaoka, and Y. Sakai, 'Characterization of polymers for capacitive-type humidity sensor based on water sorption behavior', Sens. Actuators B, vol. 49, pp. 179-185, 1998 https://doi.org/10.1016/S0925-4005(98)00117-8