• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.499-504
• /
• 1996

본 논문은 저온정지에서 2%까지 원전 자동기동시스템에 필요한 발전소 데이터를 시험검증설비로부터 얻기 위해 공유메모리와 TCP/IP를 사용하여 통신프로그램을 개발하였다. 자동기동시스템은 foxboro에서 제공하는 API(Application Program Interface)를 이용하여 데이터베이스에서 제어기에 필요한 데이터를 공유메모리에 올려놓고, 통신프로그램이 읽고 쓸 수 있도록 했으며, 시험검증설비에서는 HP Workstation에서 사용되는 내부 프로세스 통신방법을 이용하여 시험검증설비에서 나온 데이터를 공유메모리에 넣을 수 있도록 설계하였다.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.420-426
• /
• 2014

In this paper, we have implemented the low temperature fluidity test system with the composited fuel filter and heater, which has tested the low temperature fluidity of gasoline, an engine start time, the consumption of electricity and power to evaluate the system performance. The test condition have used the diesel fuel, the normal temperature, the diesel fuel supply pressure $3.4kgf/cm^2$ at $-20{\sim}-30^{\circ}C$, the fuel supply quantization 60 l/H, the setting current 30 A and the voltage $13V_{dc}$. In order to simulate the operation of diesel fuel filter, we will establish the composited fuel filter into test jig, and be filled with chamber tank and filter by a constant flow quantization and pressure. After these, it shall be cold for setting time. And then we have measured the consumption current and power of heater, an operating time and pressure of filter.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.71-77
• /
• 2023

The issue of North Korea's denuclearization is an global issue that transcends the North and South. It is necessary to prepare for the denuclearization process in preparation for the situation in which North Korea reveals its intention to denuclearize. In the process of North Korea's denuclearization, it is required to guarantee the normal operation of the denuclearization verification equipment. If a performance test criteria that takes into account the North Korean environment is established, it is highly likely that it will be used in the future denuclearization process. For this purpose, basic materials related to performance test standards were established through analysis of test standards such as international standards. After that, we established a performance test criteria. This includes high temperature, low temperature, humidity, vibration and shock tests. Through follow-up studies, validity of test criteria will be established through actual device testing.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.6-10
• /
• 2012

The main objective of this work was studying the influence of paraffin oil(PO) on the adhesion properties at low temperature in styrene-butadiene-styrene(SBS) copolymer and crumb rubber(CR) modified asphalt. The temperature susceptibility of SBS/CR asphalt and PO/SBS/CR/asphalt blends were measured by penetration and softening point. Adhesion properties at low temperature and dispersion of modifiers in PO/SBS/CR/asphalt blends were evaluated by universal test machine and florescence microscopy, respectively. The adhesion properties of PO/SBS/CR/asphalt blends at low temperature increased in the proportion of SBS contents with both 5 and 10 wt % of paraffin oil. Results showed that the maximum tensile adhesion strength and toughness energy at $-20^{\circ}C$ were obtained when PO and SBS contents were 10 wt % and 6 wt %, respectively. The addition of PO is effective for enhancing the flexibility of SBS/CR/asphalt blends and leads to the increase of toughness at low temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.2
• /
• pp.196-201
• /
• 1997

This study was carried out to understand the effect of low temperature treatment and seedling size on growth and bolting in Angeljca gjgas. Bolting rate increased as period of low temperature increased and bolting rate of control was lower than that of low temperature treatment. In low temperature treatment with seedling size, the smaller seedling size, the higher bolting rate. Period from transplanting to bolting was reduced with low temperature treatment extended and large seedling. The plant height, position of bolting leaf and number of developing leaf were decreased with low temperature treatment extended and large seedling, respectively, There was a highly significant negative correlation between bolting rate and number of developed leaves before bolting and number of developed leaves in growth to first bolting but positive correlation in late growth, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.17-28
• /
• 2007

To understand the spring freezing injury symptoms during sensitive growth stage and yield loss of barley and wheat, field tests were done by using vinyl mulching and natural cold weather. The growth stage sensitive were booting, spikelet differentiation and flower organ development stages for both crops. However, barley and wheat differed in their growth responses, in that barley was less affected than wheat. For instance, barley recorded 28 percent dead ears, 10 percent dead plants and 18 percent ear degenerations while wheat recorded higher values of 59 percent, 44 percent and 44 percent, respectively. Although there were no recorded froze-resistant varieties in both barley and wheat, some showed tolerance as their yields were not affected by freezing stress. The 'Chalbori' cultivars of barley and 'Geurumil' and 'Chokwang' cultivars of wheat recorded steady yields. The yield components of barley and wheat that were greatly affected by freezing stress were the number of spike per square and the number of grain per spike. The major cause of yield loss in Suwon 259 and Kangbori was the number of spike per square but not the number of grain per spike. The study showed, however, that both the number of spike per square and the number of grain per spike were vulnerable to freezing and that which contribute much to yield loss of barley and wheat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.2
• /
• pp.3-9
• /
• 1964

Root tips of wheat, soybean, cotton and barley were treated with cold temperature (12 or 24 hrs in $0^{\circ}C$ or 2$^{\circ}C$), 8-Hyd.exyquinolin (2 or 10 hrs in 0.03 or 0.1%) and colcllicine (2 or 10 hrs in 0.2 or 1, 0%), and the frequency of metaphase were observed. The results were summarized as follow; 1. Chilling the seminal roots before or after sooting from the seed significantly increased tile number of mitotic cells and the rate of metaphase cells to mitotic cells. The optimal duration of chilling seemed to be differ depending on the kinds of plant and 24 hours to be too long except wheat so far examined here. 9. 8-Hydroxyquinolin treatment, about 2 hours in 0.03%, increased the rate of metaphase cells. The higher concentration and the longer treatment of this chemical caused the lower frequency of mitotic cells generally. 3. Colchicine treatment, 2 to 10 hrs in 0.2 to 1.0%, increased the frequency of mitotic cells and the rate of metaphase cells. Colchicine treatment was same or superior than any other treatments on the increase of metaphase cells. 4. All the treatments examined here caused chromosome contraction with most serious in colchicine following by 8-Hydroxyquinolin and chilling. 5. The feasibility of general application of chilling under the check of proper temperature and proper duration depending on the kinds of crops were discussed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2511-2515
• /
• 2013

Carbon black from pyrolysis of waste tires was used to modify and improve the fatigue properties and low temperature cracking of asphalt binder. 0%, 5%, 10%, 15% and 20% of pyrolyzed carbon black was mixed. Couple of laboratory tests, such as dynamic shear rheometer test and bending beam rheometer test, were carried out. The use of pyrolyzed carbon black decreased the fatigue at room temperature and improved the resistance of low temperature cracking up to $-12^{\circ}C$, but, was off the criteria at $-18^{\circ}C$.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.480-486
• /
• 2006

Generally, IR cut-off filters for mobile phone is coated on the glass substrate at high temperature(above $300^{\circ}C$). In this work, we prepared IR cut-off filters on the poly(methyl methacrylate)(PMMA) substrates at low temperature(about $70^{\circ}C$ ). using the $CeO_2\;and\;SiO_2$ coatings by physical vapor deposition. The surface energies of coated and uncoated PMMA, and adhesive properties of IR cut-off filters coatings were examined using contact angle measurements. We demonstrate the improve of mobile phone optical system using these results.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.125-127
• /
• 2001

For the development of a SMES system we fabricated and tested the 1 MJ superconducting magnet The test results show that the magnet is excellent in comparison with previously fabricated magnets outside. The recovery current of the conductor plays an important role in the fabrication of the stable magnets for a SMES system.