• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.12-18
• /
• 1998

본 논문에서는 개선된 elliptic 저역통과 함수를 제시하고, CMOS DDA 소자 및 DDA 응용회로를 이용하여 CDMA 무선 휴대폰용 아날로그 DDA 저역통과 필터를 설계하 였다. 개선된 elliptic 저역통과 필터 함수는 통과대역과 저지대역에서 점진적 감소 파상 특 성을 갖고, 우수 또는 기수 차수 모두에 대해서 ω=0에서는 통과대역의 최대값, ω=∞에서 는 영이 된다. 또한 극점-Q 값이 감소함에 따라 주파수 및 시간영역의 특성 등이 기존의 함수와 비교하여 향상되었다. 아날로그 능동 저역통과 필터는 수동 복종단 제자형 회로망의 저감도 특성이 유지되는 개구리 도약법으로 모의하고, 적분기등을 외부 소자와의 정합이 필 요 없는 DDA를 이용하여 설계하였다. 설계된 DDA 회로의 단위 이득 주파수는 1.32GHz이 고 이를 이용하여 DDA 저역통과 필터를 설계하여 HSPICE로 시뮬레이션한 결과 필터의 차단 주파수는 630KHz로 설계명세조건과 일치하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.7-11
• /
• 2002

A novel microstrip type law-pass filter using thin or thick film resistors is proposed to efficiently eliminate harmonic spurious response in stop-band. The proposed low-pass filter shows the spurious suppression enhancement of 20 dB over a conventional one. The designed low-pass filter could be used as a harmonic rejection filter of a local oscillator for Ku-band satellite payload system.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.238-241
• /
• 1998

성문파 신호로부터 음원변수들을 추출하는 방법과 그 전 단계에서 역 필터링 방법에 의해 구한 미분성문파 신호로부터 고주파 잡음을 제거하기 위해 음원구간에 따라 필터의 대역폭을 달리함으로서 음원변수 추출과정에서 저역통과 필터에 의해 발생할 수 있는 오차를 최소화하기 위한 선택적 저역통과 필터링 방법을 제안한다. 이 방법은 음원모델중 하나인 LF-model 펄스를 합성하여 필터링 함으로서 그 성능을 비교, 평가하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.331-334
• /
• 2006

In this paper, we designed and fabricated the lowpass filter with the wide stopband characteristics using microp- strip line. Adding the $\lambda_g/4$ open stub at the input and output ports, we developed the L-C ladder type lowpass filter using the open stub which has wide stopband characteristics. In order to reduce the entire size qf this filter, the high impedance microstrip lines were made with the meander structure. The lowpass filter was fabricated with the cutoff frequency 2.3 GHz and its measured frequency responses agree well with the simulation results.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.38-42
• /
• 2005

CMOS analog lowpass filters using speech signal bandwidth for a Asymmetrical Digital Subscriver Line(ADSL) modem are presented. Designed active lowpass filters are composed of the CMOS complementary high-swing cascode stage which can increase transconductance of an active element. As a result, their cutoff frequency are 138kHz and 1,100kHz respectively. A low-voltage high-swing cascode integrator which improved on a gain and unit gain frequency used to design the filters. The designed filters are verified by HSPICE simulation with the $0.251{\mu}m\;CMOS\;n-well$ Parameter and a single 2.5V power supply.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.9-14
• /
• 2012

In this study, the diplexer used a separator or a combine of signals was designed and its characteristics were investigated. The diplexer consists of two fixed tuned bandpass filter such as low pass filter(LPF) and high pass filter(HPF) sharing a common part and was simulated. The diplexer with micro-strip structure was fabricated. The LPF of diplexer has insertion loss of -0.4 dB, return loss of -30 dB and 1.6 GHz cut-off frequency and HPF has insertion loss of -0.8 dB, return loss of -30 dB and 1.9 GHz cut-off frequency, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.5B
• /
• pp.639-644
• /
• 2001

본 논문에서는 저전압(2V) 동작이 가능하도록 high-swing cascode 방식을 이용한 능동소자를 제안하고, 이를 이용하여 400MHz의 차단주파수 특성을 나타내는 저역통과 능동필터를 설계하였다. 제안된 적분기는 이득특성에 영향을 주는 트랜스컨덕스값을 증가시키기 위해 CMOS 상보형 캐스코드 방식을 이용하여 구성되었다. 0.25$\mu\textrm{m}$ CMOS n-well 공정 파라미터를 이용한 Hspice 시뮬레이션 결과, 제안된 적분기는 2V 공급전압하에서 42dB의 이득값과 200MHz의 단위이득주파수 특성을 나타내었다. 또한 이를 이용하여 설계된 저역통과 능동필터는 400MHz의 차단주파수 특성을 나타내고 368MHz에서 416MHz까지 튜닝이 가능하였다.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.11-21
• /
• 1999

This paper has been proposed a structure composed of FIRs and IIR filters as digital interpolation filter to integrate the off-chip analog low-pass filter of audio DAC. The passband ripple (>$0.41{\times}fs$), passband attenuation(>at$0.41{\times}fs$) and stopband attenuation(<$0.59{\times}fs$) of the ${\Delta}{\Sigma}$ modulator output using the proposed digital interpolation filter had ${\pm}0.001[dB]$, -0.0025[dB] and -75[dB], respectively. Also the inband group delay was 30.07/fs[s] and the error of group delay was 0.1672%. Also, the attenuation of stopband has been increased -20[dB] approximately at 65[kHz], out-of-band. Therefore the RC products of analog low-pass filter on chip have been decreased compared with the conventional digital interpolation filter structure.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.965-970
• /
• 2018

In this paper, the transition of the folded substrate integrated waveguide (FSIW) using two substrates is suggested and applied to the bandpass filter. The FSIW has similar characteristics with the SIW and can be reduced the width of the SIW. The transition between the FSIW to the microstrip is designed by using shorted quarter wavelength line. Also, the bandpass filter is designed by using the FSIW and the elliptic lowpass filter of 5 section. Fabricated bandpass filter has the center frequency of 5.75 GHz and the bandwidth of 33.2%. Also, the insertion loss and return loss at the center frequency are 0.63dB and 19.1dB, respectively.