• Title/Summary/Keyword: 저수표면적

Search Result 34, Processing Time 0.03 seconds

Evaluation of Shrinkage Properties Based on Mock-Up Testin High Performance Concrete (Mock-Up 시험에 의한 고성능 콘크리트의 수축특성 분석)

  • Han, Cheon-Goo;Kang, Su-Tae;Koh, Kyung-Taek;Hann, Chang-Pyung
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.10 no.5
    • /
    • pp.106-114
    • /
    • 2006
  • This paper investigates the fundamental properties and shrinkage characteristics of low shrinkage high performance concrete(LSHPC), using mock-up specimens. According to the test results, the most suitable mix proportions of LSHPC need a higher dosage of SP agent and AE agent, in order to obtain the target of slump flow and air content. This is due to reduce fluidity and air content respectively. It also presented earlier setting time than control concrete by 6 hours and exhibited compressive strength of 60MPa at age 28 days. Autogenous shrinkage of LSHPC was the half of the value of control concrete. Drying shrinkage of center section of LSHPC showed similar tendency with autogenous shrinkage, because of no internal moisture movement, while surface section had larger drying shrinkage. The specimen with embedded reinforcing bar had smaller deformation owing to confinement of reinforcing bar.

Selecting the optimal location of debris containment booms in a reservoir using a ELCOM model (ELCOM 모형을 이용한 인공호의 부유물 차단망 최적 위치 선정)

  • Chong, Sun-A;Yi, Hye-suk;Lee, Seung-yoon;Lee, Yo-sang;Kim, Dong-sup
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.23-23
    • /
    • 2016
  • 우리나라의 댐저수지는 홍수기에 상류로부터 다량의 부유물이 폐기물 등과 함께 일시에 유입되어 미관을 해치거나 상수원 수질을 악화시키는 등의 문제점을 가지고 있다. 이에 부유물의 하류확산을 방지하고 수거와 처리를 효율적으로 하기 위한 부유물 차단망이 설치되어 운영 중이다. 부유물 차단망의 설치위치는 저수지내의 흐름을 고려하여 부유물을 가장 효과적으로 차단할 수 있는 지점을 선정하여야 하나, 저수지 흐름을 고려하지 않고 설치될 경우 차단망이 빈번하게 훼손되거나 부유물이 적절하게 포집되지 못한 채 상류에 흩어지는 결과를 초래하기도 한다. 본 연구에서는 대형저수지인 소양댐과 신규 중소규모 댐인 영주댐의 부유물 차단망 최적 설치위치를 선정하기 위하여 3차원 모형을 이용하여 다양한 조건에서의 저수지내 흐름분포와 수리적 특성을 검토하였다. 적용모형은 3차원 수리동력학 모형인 ELCOM 모형을 적용하였으며, 홍수기 표면 유속장 분포, 수직수온분포 및 밀도류 발생지점 등을 종합적으로 분석하여 최적 설치지점을 검토하였다. 시뮬레이션 조건은 200년 빈도 홍수 유입에 대해 초기 수위에 따른 영향을 고려하기 위하여 갈수위, 풍수위 등으로 구분하여 분석하였다. 분석결과, 소양댐의 경우 기존 설치위치에서는 plunging point가 설치지점보다 하류에 위치하여 부유물 포집 기능에는 이상이 없으나 최대유속이 2 m/s를 초과하는 것으로 나타나 안정적 운영을 위하여 이전 설치하는 것이 적합할 것으로 판단되었다. 또한 신규댐인 영주댐에서는 다양한 시나리오에 대하여 분석한 결과 2개 지점이 적합한 것으로 분석되어 적치장 위치 등을 종합적으로 고려하여 최적위치를 선정하도록 하였다. 이와 같은 연구 결과는 부유물 차단망 설치설계기준 등에 반영되어 과학적인 댐 운영관리에 활용될 것으로 판단되며, 향후 보다 안정적인 시설물 관리에 기여할 수 있을 것으로 사료된다.

  • PDF

Assessment of Soil Loss Risk based on the Land Use Characteristics of Nakdong River Watershed using GIS (GIS를 이용한 낙동강유역의 토지이용특성에 따른 토양손실 위험성 평가)

  • Jeong, Won-Jun;Kwon, Yong-Sung;Ji, Un;Yeo, Woon-Kwang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.334-338
    • /
    • 2011
  • 일반적으로 유역에서 발생하는 토양손실은 붕괴사면과 표면침식, 토사류 붕괴에 의한 운반, 하상의 침식등 자연적인 요인과 도로건설, 산림의 벌채, 단지개발 등 인위적인 원인으로 발생할 수 있다. 토양손실의 발생은 농업생산성을 떨어뜨리고 목초지를 손상시키며, 물의 흐름을 방해하여 홍수위 상승, 저수지의 저수용량 감소, 고탁수 등 다양한 문제를 야기 시킨다. 이러한 문제를 해결하기 위해선 우선 토양손실 발생의 위험지역을 선정하고 그 지역을 집중적으로 관리하는 적절한 관리 대책의 마련이 필요하다. 이에 본 연구에서는 낙동강유역 전체를 대상유역으로 선정하고 토양손실 발생에 영향을 주는 여러 요소중 도시화나 농경지 확장 등 인간의 인위적인 개발로 인해 쉽게 변경될 수 있는 토지이용도를 이용하여 세부적으로 분석하였다. 토지이용도를 구성하고 있는 총 8가지의 토지이용항목 중 다른 항목들에 비해 분포면적이 매우 작은 녹지, 습지, 나지를 제외한 5가지의 항목(시가화, 논, 밭, 산림, 수역)의 분포면적을 통해 토지 이용특성에 따른 유사발생의 연관성을 파악하였으며 유역별 유사발생 위험순위를 평가하였다. 유사발생 위험순위 평가결과, 전체 낙동강유역내 유사발생 위험성이 높은 표준유역들로 구성되어있는 중권역은 내성천, 위천합류점, 합천댐유역, 안동댐유역으로 모두 높은 순위를 차지했다. 내성천유역, 위천합류점 유역, 합천댐유역은 구성하고 있는 표준유역의 절반 이상이 높은 순위들로 구성되어 있으며 안동댐유역은 구성하고 있는 소수의 표준유역이 유역내 최상위 순위를 차지하였다.

  • PDF

cDNA microarray analysis of viral hemorrhagic septicemia infected olive flounder, Paralichthys olivaceus: immune gene expression at different water temperature (바이러스성 출혈성 패혈증에 감염된 넙치의 cDNA microarray 분석 : 수온에 따른 면역 유전자 발현의 차이)

  • Kim, Jin-Ung;Jung, Sung-Ju
    • Journal of fish pathology
    • /
    • v.27 no.1
    • /
    • pp.1-9
    • /
    • 2014
  • The olive flounder, Paralichthys olivaceus is susceptible to viral hemorrhagic septicaemia virus (VHSV) at $15^{\circ}C$ but no mortality at $20^{\circ}C$ even though the virus can grow well in vitro at $20^{\circ}C$. Thus, we designed an experiment to know immune response of olive flounder against VHSV when the host reared at $15^{\circ}C$ or $20^{\circ}C$. cDNA microarray analysis was performed to compare the gene expression patterns of the kidney cells between the host reared at $15^{\circ}C$ or $20^{\circ}C$. The expression of MHC class I, IL-8, myeloperoxidae and endonuclease G-like having function for the antigen presentation and chemokine-factor were up-regulted both the $15^{\circ}C$ and $20^{\circ}C$ during VHSV infection. MHC class II gene existing on antigen-presenting cells and B cell lymphocytes, immunoglobulin (Ig) genes and phagocytosis related genes were down-regulated at $15^{\circ}C$ but highly expressed at $20^{\circ}C$. It can be thought that innate immune related antigen presentation by MHC class I and phagocytosis reaction against VHSV are efficiently occur both the temperature but macrophage or B cell related antigen presentation via MHC class II fails to induce downstream immune reactions (adaptive immunity) to make antibody, and it can be one of the reason that causes high mortality only at $15^{\circ}C$.

Study on Underwater Welding ( Report 1 ) - Its Weldability -

  • 남기우
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.19 no.1
    • /
    • pp.63-70
    • /
    • 1983
  • Recently, many studies for developing the underwater welding techniques have been carried out in the advanced countries as a manufacturing process and a repairing method according as a great deal of interest in development for various marine industrial fields has been gradually increased. But no study on such underwater welding is available at present in our country. In this study, underwater welding was carried out for welding of domestic structural steel plates (SM41A) of 10 mm thickness, using six types of domestic coated arc welding electrodes on a self-made gravity type underwater welding device, resulting in investigation for the underwater weldability of the domestic structural steel plates as well as for the underwater welding properties and practicability of the domestic welding electrodes.

  • PDF

호소의 부영양화 및 관리

  • 공동수
    • Proceedings of the Korea Society of Environmental Toocicology Conference
    • /
    • 1994.05a
    • /
    • pp.51-53
    • /
    • 1994
  • 담수는 인간의 생존에 필수적인 요소이다. 우리는 매일 일정량의 물을 섭취하고 있으며, 일상에서 직접, 간접적으로 물과 관련되지 않고서는 생활할 수 없다. 지구 표면의 약 70%가 물로서 덮여 있다고는 하지만 인간의 생활에 직접적인 이용가치가 있는 담수(지표수)는 전체 물의 용적의 2%에 지나지 않는다. 한국의 연평균 강수량은 1,274mm로서 세계 연평균 강수량인 970mm보다 많은 편이나 인구 1인당 연간 강수량은 약 3,000m3으로서 세계 평균인 34,000m3의 11분의 1에 지나지 않는다. 수자원총량중 지하침투와 증발에 의해 손실되는 양을 제외한 하천유출량은 전체의 55%인 697억m3으로서 이것이 곧 가용수자원량이다. 그러나 하절기 강우집중도가 높은 우리나라 실정에서는 가용수자뭔량중 수자원총량의 37%가 홍수시 유출되고 실제 이용량은 수자원총량의 18%인 230억m3에 불과하여 인구증가와 함께 수자원의 가치가 더욱 증대하고 있는 실정이다. 더우기 지하수 이용량은 19억m3에 불과함에 따라 우리나라는 실제 이응수자 원량의 90% 이상을 지표수에 의존하고 있으며, 그 중 약 40%가 호소수로 구성되어 있다. 이러한 수자원 이용효율의 취약성으로 인해 제한된 수자원 용량과 생활 및 농공용수의 과수요에 따른 불균형으로 근래 많은 하천이 갈수기나 평수기시 친천화되어 가고 있어 수중생태계에 큰 위협을 주고 있다. 또한 이에 더하여 산업발달과 함께 수질오염원은 양적으로는 물론 질적으로도 증가일로에 있어 기존의 유기 및 중금속 오염물질을 포함해 수많은 신생 유기화합물질이 수계에 유출되고 있으며, 이에 더해 질소 및 인으로 대표되는 영양물질의 유입과다로 국내 대다수의 호수가 부영양화의 새로운 위협에 직 면해 있다. 우리나라에는 적은 유입유량에 큰 저수용량 및 긴 체류시간으로 대표되는 대규모 자연호는 없으며, 대부분이 매단위 강을 막아 형성된 체류시간 1년 이하의 인공호로서 그 중 안동호, 충주호, 대청호 등은 비교적 체류시간이 긴 호소형 인공호로, 팔당호나 기타 대부분의 호수는 체류시간이 짧은 하천형 인공호로 대별된다(Table 1). 이처럼 국내 호소는 국외의 자연 호와는 다른 구조적 특성을 가짐에 따라 부영양화 특성 역시 매우 상이하고, 호소형 인공호와 하천형 인공호간의 차이 역시 현저하여 일률적인 관리대책을 설정하기가 어려운 실정에 있다. 또한 각 호수의 유역특성이 상이함에 따라 호수별로 유역 오염원의 오염부하율이 현저히 달라(Table 2) 호수에 따른 특성적인 유역관리(Lake-specific management)가 요구되고 있다 정상상태(Steady state)가 아닌 국내 호소에 대해 국외 자연호의 인단순모델 (Simple phosphorus budget model)을 그대로 적용하는 것에 다소 무리한 점이 따르나, 평균적인 개념으로 OECD의 유역부하량 및 호소특성에 따른 부영양화 판정모델을 적용한다면, 국내 주요 호수는 모두 부영양 수준에 있다. 또 각 호수별로 부영양화 제어를 위해 요구되는 인의 삭감부하량은 상당량이 되어 현실적으로 관리가 이미 어려운 실정에 와 있다. 호수의 부영양화는 조류 발생으로 이어지며, 그에 따른 폐해는 각종 형태로 나타나는데 대표적으로 이취미 발생이나 유해조류에 의한 독성물질의 배출, 정수처리 과정의 THM 발생등이 주로 문제가 되고 있다. 따라서 국내 호수의 구조적 특성별 부영양화 실태를 파악하고 그에 따른 영향 및 관리방안에 관한 종합적 고찰이 차후 수질관리를 위해 요구되고 있으며, 특히 납조류로 대표되는 유해조류의 독성영향에 관한 연구는 시급한 실정에 있다.

  • PDF

A Study on Field Experiment and Numerical Modeling for Efficiency Analysis of Selective Withdrawal in Imha Reservoir (임하호 선택취수 효과분석을 위한 현장실험 및 수치해석 연구)

  • Kim, Tae Won;Kim, Young Do;Yi, Yong-Kon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.32 no.2B
    • /
    • pp.113-121
    • /
    • 2012
  • When a heavy rain brings flooding, a high turbid water is flowing into a reservoir. In this study, the effectiveness of the intake structures for the selective withdrawal from the various levels of a stratified reservoir was evaluated by the field experiments and the numerical modeling of the three-dimensional approaching flows. The temperature, the turbidity, and the velocity fields for the selective withdrawal were measured using both YSI6600EDS and YSI6600ADV, respectively. A threedimensional model, FLOW-3D, was used to predict the performance of the intake tower in Imha reservoir. The comparisons of the vertical velocity field showed a good agreement with the field measurements. The efficiency of the turbid-water elimination of the selective withdrawal method from low levels was higher up to 46% than that of the surface withdrawal. From the analysis of the numerical simulation, the efficiency of turbidity elimination increased by 10% for the selective withdrawal from middle levels, and by 30% from low levels. These results showed that the selective withdrawals from middle and low levels are more effective than the surface-water intake. The similar results were obtained by the one-dimensional model, SELECT, which is much more computationally time-efficient.

Subsurface Geological Structure Using Shallow Seismic Reflection Survey (반사법 탄성파 탐사를 이용한 천부 지질 구조)

  • Kim Gyu-Han;Kong Young-Sae;Oh Jinyong;Lee Jung-Mo
    • Geophysics and Geophysical Exploration
    • /
    • v.2 no.1
    • /
    • pp.8-16
    • /
    • 1999
  • In terms of high resolution, seismic reflection survey is by far the most significant geophysical method applied to define subsurface structure. In shallow seismic reflection survey, it is, however, difficult to obtain high resolution image due to both the wave attenuation in the unconsolidated layer and the existence of source-generated surface waves Therefore, when collecting data, it is imperative to select proper equipments and choose optimum field data acquisition parameters for acquiring high S/N data. In this survey, a small size hammer was used as a low energy source and 40-Hz vertical geophones were used as receivers. Trigger signal was obtained from the hammer starter attached in the aluminum plate and thus it was possible to control the source onset time for the vertical stack. During the field work, a modified standard CMP technique was introduced to achieve the many-fold CMP data effectively. Data processing was conducted by the 'Seismic Unix' which is mounted on PC with a Linux operating system. The main distinctions were the emphasis and detail placed on near-surface velocity analysis and the extra care exercised in muting.

  • PDF

Characteristics of Amorphous Si Films Fabricated by Mesh-type PECVD and Their Crystallization Behavior Using Excimer Laser (Mesh-type PECVD 방법으로 제조된 비정질 Si박막의 특성 및 레이저 결정화)

  • Han Sang-Yong;Choi Jae-Sik;Kim Yong-Su;Park Sung-Gye;Ro Jae-Sang;Kim Hyoung-June
    • Journal of the Korean Electrochemical Society
    • /
    • v.3 no.1
    • /
    • pp.19-24
    • /
    • 2000
  • It is increasingly necessary to use poly-Si n's as high resolution and integration of Tn for LCD. Excimer Laser Crystallization (ELC) of a-Si is mainly used as a low temperature process. But the ELC method for the fabrication of poly-Si has the eruption problems associated with hydrogen in the a-Si film. So we need a dehydro-genation process additionally. Hydrogen in a-Si film can degrade the quality of poly-Si film and electrical properties of device due to the hydrogen eruption and voids which occur during the excimer laser annealing. In this study, we propose mesh-type PECVD as the a-Si film deposition method for achieving the low concentration hydrogen. Mesh-type PECVD was found to reduce the hydrogen content substantially. We could obtain a as-deposited a-Si film with hydrogen contents less than $1\%$ at $300^{\circ}C$. We also investigated the behavior by XeCl excimer laser annealing of a-Si fabricated by mesh-type PECVB. As a result, we were able to confirm the broad process window in contrast to the narrow process range typically obtained in ELC. Hydrogen eruption was not observed in poly-Si films after ELC These results suggests that mesh-type PECVD is a viable method to achieve the low hydrogen content a-Si and improve the process windows for ELC.

Improvement of Artificial Antibody Secretion Using Supercharged Protein (단백질의 과전하화를 이용한 인공 항체의 분비 개선)

  • Park, Jiyeon;Choi, Heeju;Lee, Hyejin;Ahn, Jung Hoon
    • Journal of Life Science
    • /
    • v.30 no.5
    • /
    • pp.420-427
    • /
    • 2020
  • A repebody, an artificial non-immunoglobulin protein scaffold, is expected to be a solution in the search for faster, cheaper, and customizable antibodies. However, the production of medical repebodies remains difficult due to their low yield and the complex purification processes required. The Pseudomonas fluorescens ABC transporter system has been suggested as an efficient and cost-effective method for repebody production, but the total yield is low because of the secreted protein's positive charge; thus, a repebody with a high isoelectric point needs to be changed into a more negatively charged protein for better secretion. To achieve this, we first attached oligo-aspartic acids to the N- and C-terminals of the repebody, but secretion efficiency was not enhanced significantly. Subsequently, we devised an alternative method for improved secretion efficiency by engineering fifteen positively charged amino acids to aspartic acid in the non-antigen binding sites of the repebody to give a high net negative charge. As a result, secretion efficiency was greatly enhanced from 21.2% (wildtype) to 58.5% (negatively supercharged). The negatively supercharged repebody was succussfully produced extracellularly by ABC transporter secretion system in P. fluorescens.