• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.375-375
• /
• 2019

충주댐 유역의 미계측유역을 대상으로 공간분포를 고려한 저류함수법 기반의 유출자료를 활용하여 지역최대홍수량의 추정 가능성을 평가하였다. 유출자료의 공간확장 가능성을 보기위해 2008년부터 2017년까지의 홍수 사상 중에 8개를 선정하였으며, 적절한 비교와 NSE 검증을 위해 충주댐, 영월1, 영춘 수위관측소를 검정지점으로 지정하였다. 또한, 선정한 사상 8개의 계측유역 유출자료를 바탕으로 공간확장방법을 활용하여 미계측유역의 유출자료를 생성하였다. 생성한 유출자료로 충주댐 유역의 홍수 사상과 지역최대홍수량(QRMF) 사이의 상관관계를 분석하여 지역최대홍수량의 발생 가능성과 충주댐 유역의 K값을 추정하였다. NSE 검증결과 유역출구지점인 충주댐에서 0.53으로 만족하여 유출자료 공간확장방법을 활용한 모의유출자료 산정은 적절한 것으로 나타났으며, 모의유출자료의 특성이 실제 유역의 특성과 유사한 것으로 나타났다. 생성한 유출자료와 지역최대 홍수량($Q_{RMF}$)에 대해 피어슨 상관계수와 RMSE를 활용하여 평가한 결과 서로 매우 높은 상관관계를 나타냈으며(Pearson's r> 0.9), 홍수량 산정방법에 있어서 지역최대홍수량($Q_{RMF}$)를 사용하여 산정하는 것이 바람직한 것으로 나타났다(RMSE=1.94). 또한, 충주댐 유역에 대한 지역최대홍수량($Q_{RMF}$)의 K값은 5.298로 산출되었으며, 산출한 K값으로 전체적인 충주댐 유역의 최대홍수량뿐만 아니라 면적이 비교적 작은 소유역의 최대홍수량도 추정할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2255-2265
• /
• 2013

This study presents the width function-based Clark model. To this end, rescaled width function with distinction between hillslope and channel velocity is used as time-area curve and then it is routed through linear storage within the framework of not finite difference scheme used in original Clark model but analytical expression of linear storage routing. There are three parameters focused in this study: storage coefficient, hillslope velocity and channel velocity. SCE-UA, one of the popular global optimization methods, is applied to estimate them. The shapes of resulting IUHs from this study are evaluated in terms of the three statistical moments of hydrologic response functions: mean, variance and the third moment about the center of IUH. The correlation coefficients to the three statistical moments simulated in this study against these of observed hydrographs were estimated at 0.995 for the mean, 0.993 for the variance and 0.983 for the third moment about the center of IUH. The shape of resulting IUHs from this study give rise to satisfactory simulation results in terms of the mean and variance. But the third moment about the center of IUH tend to be overestimated. Clark model proposed in this study is superior to the one only taking into account mean and variance of IUH with respect to skewness, peak discharge and peak time of runoff hydrograph. From this result it is confirmed that the method suggested in this study is useful tool to reflect the heterogeneity of drainage path and hydrodynamic parameters. The variation of statistical moments of IUH are mainly influenced by storage coefficient and in turn the effect of channel velocity is greater than the one of hillslope velocity. Therefore storage coefficient and channel velocity are the crucial factors in shaping the form of IUH and should be considered carefully to apply Clark model proposed in this study.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• The Korean Journal of Nuclear Medicine
• /
• v.38 no.6
• /
• pp.506-510
• /
• 2004

Purpose: We investigated whether Tc-99m MIBI imaging is useful to predict the response of drug treatment in patients with rheumatoid arthritis. Materials and Methods: 24 patients (15 women and 9 men, age $49{\pm}12$ year) rheumatoid arthritis and treated with disease modifying antirheumatic drugs (DMARDs) were included in this study. Erythrocyte sedimentation rate (ESR) and C-reactive protein (CRP) were measured, and Tc-99m MIBI scan was obtained before drug treatment. Quantitative analysis of uptake in diseased joints was performed and expressed as joint-to background ratio (J/B) and percent retention (%R) of Tc-99m MIBI. Clinical symptoms were evaluated and graded from 0 (no) to 3 (severe) regarding to presence of tenderness and swelling. Results: J/B of the diseased joints were significantly correlated with ESR and CRP (p<0.05). A highly significant correlation was found between the improvement of clinical symptoms and %R of Tc-99m MIBI (p<0.05). Conclusion: The results demonstrate that Tc-99m MIBI scan may be used to predict the therapeutic response in patients with rheumatoid arthritis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.395-395
• /
• 2018

기후변화 및 토지이용변화에 따라 강우량 및 증발산량 등과 같은 물순환계 구성요소가 변화하면 유역에서의 물순환계가 영향을 받게 된다. 이렇게 변화된 유역의 물순환계를 종합적으로 관리하기 위해서는 물순환 개선 기술을 통한 지속가능하고 건전한 물순환체계의 구축이 필요하다. 유역 물순환 개선 기술은 기후변화가 진행 중에 있거나 예상되는 지역에 대하여 강우-유출수를 지연, 저류, 침투시켜 지속가능한 물순환체계를 유지 회복하도록 하는 기술이라 할 수 있다. 한국건설기술연구원에서는 기후변화 대비 수자원 적응기술 개발 연구단(CCAW, Climate Change Adaptation for Water resources)의 연구비 지원을 받아 유역 건전성 및 취약성을 평가 하고 취약한 유역에 대한 물순환 개선기술을 확보하기 위한 연구를 수행 중에 있다. 특히, 수년간 국가연구개발사업을 통해 개발되고 사업화에 성공한바 있는 유역 물순환 평가 모형인 CAT(Catchment hydrologic cycle Assessment Tool)을 수정 개선하여 수요자 중심의 활발한 현장 적용을 도모하고 있다. 본 연구에서는 개발된 유역 물순환 개선 및 평가시스템의 적용성 평가를 위하여 대상유역으로 태국의 Lam Takhong 저수지 유역을 선정하였다. Lam Takhong 저수지 유역은 유역면적은 $1,423km^2$이며 저류량은 약 $440{\times}106m^3$이다. 입력자료인 DEM, Land Cover 자료는 USGS Hydro1K (https://earthexplorer.usgs.gov/), 하천망 및 유역경계 자료는 USGS HydroSHEDS (https://hydrosheds.cr.usgs.gov/dataavail.php), 기상 및 관측 유입량, 저수지 제원 등의 자료는 APEC 기후센터의 협조를 받아 1976년부터 2016년까지의 일단위 자료를 이용하였다. 모의결과는 저수지 월별 관측 유입량과 상류 유역의 모의 유출량을 이용하여 비교-분석 하였다. Lam Takhong 저수지 상류 유역은 APEC 기후센터에서 SWAT 모형을 이용하여 저수지 유입량 분석을 수행한 바 있다. 따라서 본 연구의 결과를 SWAT 모의결과와 비교하여 그 적용성을 검증하였다. 월별 관측 유입량과 저수지 상류 유역 모의 유출량을 비교한 결과 CAT의 경우 결정계수(R2) 값이 0.86, SWAT은 0.76으로 나타나 CAT의 적용 결과가 좀 더 우수한 것으로 나타났다. 모의 결과는 매개변수 최적화 과정을 거치지 않은 결과이며 SWAT 모형과의 결과 비교를 위하여 매개변수는 동일하게 적용하였다. 향후 매개변수 최적화 모듈을 통해 검 보정 단계를 거친다면 정밀한 분석이 가능할 것으로 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.90-103
• /
• 2018

This paper presents the development of two ANN models which can predict an optimum production rate by controlling choke size in oil well, and gas injection rate in gas-lift well. The input data was solution gas-oil ratio, water cut, reservoir pressure, and choke size or gas injection rate. The output data was wellhead pressure and production rate. Firstly, a range of each parameters was decided by conducting sensitive analysis of input data for onshore oil well. In addition, 1,715 sets training data for choke size decision model and 1,225 sets for gas injection rate decision model were generated by nodal analysis. From the results of comparing between the nodal analysis and the ANN on the same reservoir system showed that the correlation factors were very high(>0.99). Mean absolute error of wellhead pressure and oil production rate was 0.55%, 1.05% with the choke size model, respectively. And the gas injection rate model showed the errors of 1.23%, 2.67%. It was found that the developed models had been highly accurate.

• Journal of Korea Water Resources Association
• /
• v.55 no.5
• /
• pp.383-392
• /
• 2022

The restoration of the Nakdong River estuary is one of the most important projects of the Ministry of Environment, Republic of Korea. A real-scale experiment of gate operation was executed from 2019 to 2020, and a pilot operation was performed in 2021. The gate of Nakdong River Estuary Barrier (NEB) is supposed to be continuously opened based on the experiment results. Many critical decisions should be made immediately during the experiment based on the real-time measured data and numerical analysis considering the seawater inflows. The decision-making sequence was made systematically with the accurate estimation of seawater inflow. The estimation of seawater inflow is the main research objective and the equations of seawater inflow were developed, reflecting the structural characteristics of NEB. The inflow equations were developed in two forms, overflow and underflow. ADCP (Acoustic Doppler Current Profiler) was used to measure seawater inflow, check the accuracy of the developed equations, and derive the flow coefficient. The comparison error of the developed equations was about 3% compared to the measured data.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.348-372
• /
• 2023

In relation to the high-level radioactive waste disposal project in deep fractured rock aquifer environments, it is essential to evaluate hydrogeological characteristics for evaluating the suitability of the site and operational stability. Such subsurface hydrogeological data is obtained through in-situ tests using boreholes excavated at the target site. The accuracy and reliability of the investigation results are directly related to the selection of appropriate test methods, the performance of the investigation system, standardization of the investigation procedure. In this report, we introduce the detailed procedures for the representative test method, the constant pressure injection test (CPIT), which is used to determine the key hydrogeological parameters of the subsurface fractured rock aquifer, namely hydraulic conductivity and storativity. This report further refines the standard test method suggested by the KSRM in 2022 and includes practical field application case conducted in volcanic rock aquifers where this investigation procedure has been applied.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.670-691
• /
• 2018

This study presents the research results of the BMT(Benchmark Model Test) simulations of the DECOVALEX-2019 project Task B. Task B named 'Fault slip modelling' is aiming at developing a numerical method to predict fault reactivation and the coupled hydro-mechanical behavior of fault. BMT scenario simulations of Task B were conducted to improve each numerical model of participating group by demonstrating the feasibility of reproducing the fault behavior induced by water injection. The BMT simulations consist of seven different conditions depending on injection pressure, fault properties and the hydro-mechanical coupling relations. TOUGH-FLAC simulator was used to reproduce the coupled hydro-mechanical process of fault slip. A coupling module to update the changes in hydrological properties and geometric features of the numerical mesh in the present study. We made modifications to the numerical model developed in Task B Step 1 to consider the changes in compressibility, Permeability and geometric features with hydraulic aperture of fault due to mechanical deformation. The effects of the storativity and transmissivity of the fault on the hydro-mechanical behavior such as the pressure distribution, injection rate, displacement and stress of the fault were examined, and the results of the previous step 1 simulation were updated using the modified numerical model. The simulation results indicate that the developed model can provide a reasonable prediction of the hydro-mechanical behavior related to fault reactivation. The numerical model will be enhanced by continuing interaction and collaboration with other research teams of DECOVALEX-2019 Task B and validated using the field experiment data in a further study.