• Review of KIISC
• /
• v.27 no.2
• /
• pp.34-40
• /
• 2017

제어시스템(발전시설, 전력시설, 교통시설 등)은 생산성, 가용성, 안전성을 목적으로 다양한 제어기기들로 구성되며, 물리적으로 다양한 위치에 분산되어 운영되고 있다. 그리고 안전성과 가용성을 유지하기 위해 시스템 도입 시 기존 시스템에 영향을 미치지 않는지 검증을 수행 후 시스템을 도입한다. 이러한 이유로 신규 기술의 도입이나, 기기의 변경이 자유롭지 않다. 이와 같은 제어시스템의 특성으로 인해 현재 증가되고 있는 제어시스템 사이버공격에 대한 보안대책 또는 기술들의 적용이 쉽지 않아 사이버공격에 취약한 상황이다. 제어시스템은 상위 시스템의 제어 명령을 통해 하위 제어기기 또는 필드기기를 제어하는 형태로 제어 명령의 무결성 유지가 특히 중요하다. 이는 곧 제어시스템에 환경에 접근한 공격자가 인가되지 않은 장비를 제어시스템에 연결하고, 악성 제어명령을 전송하게 된다면 제어기기는 이를 인지하지 못하고 정지되거나 오작동을 유발 할 수 있다는 것을 의미한다. 본 논문에서는 제어시스템 내 제어명령의 무결성 유지를 위해 임베디드 Add-on 단말을 통해 OTP 값을 생성, 전달, 검증하는 방안을 제안한다. 해당 방안은 상위노드와 하위노드 사이에 Add-on 장치를 두어 상위노드에서 제어명령 발생 시, 제어명령에 OTP값을 통해 캡슐화하고 하위노드로 전달한다. Add-on 장비는 일반 IT시스템과 상이한 제어시스템의 특성에 맞게 고안되었으며 제어시스템 내에 발생되는 제어명령 위변조, 제어명령 재사용 공격 등을 차단 할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.357-364
• /
• 2015

Tags and Readers is receiving and sending the data using the wireless communication in the RFID environment. Therefore, it could allow an attacker to participate in the network without the physical constraints, which can be easily exposed to a variety of attacks, such as taps and data forgery. Also, it is not easy to apply the security techniques to defend external attacks because the resource constraints of RFID tags is high. In this paper, new tag-reader mutual authentication protocol is proposed to protect the external cyber attacks such as spoofing attacks, replay attacks, traffic analysis attacks, location tracking attacks. The performance evaluation of the proposed mutual authentication protocol is performed and the simulation results are presented.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.6
• /
• pp.1219-1230
• /
• 2012

Recently, lots of users are using wireless LAN providing authentication and confidentiality with security mechanism such as WEP, WPA. But, weakness of each security mechanism was discovered and attack methods that user's information was exposed or modified to the third parties with it and abused by them were suggested. In this paper, we analyzed architecture of security mechanisms in wireless LAN and performed PSK cracking attack and cookie session hijacking attack with the known vulnerability. And, an improved 4-way handshake mechanism which can counter PSK cracking attack and a cookie replay detection mechanism which can prevent cookie session hijacking attack were proposed. Proposed mechanisms are expected to apply to establish more secure wireless LAN environment by countering existing vulnerability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2011

Live data in physical memory can be acquired by live forensics but not by harddisk file-system analysis. Therefore, in case of forensic investigation, live forensics is widely used these days. But, existing live forensic methods, that use command line tools in live system, have many weaknesses; for instance, it is not easy to re-analyze and results can be modified by malicious code. For these reasons, in this paper we explain the Windows kernel architecture and how to analyze physical memory dump files to complement weaknesses of traditional live forensics. And then, we design and implement the Physical Memory Dump Explorer, and prove the effectiveness of our tool through test results.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.257-268
• /
• 2018

Recently, the international standardization of ISO in the field of Oriental Herbal Medicine has been progressing rapidly under the direction of China's promotion. China's intention to promote international standardization is to extend its influence to the world and beyond the domestic market. The Oriental medicine system in East Asia has similar roots in academic terms, but the medicines that can be supplied and received in each country are different and have developed independently. The international standardization of medicinal herbs is expected to function in a direction that weakens such differentiation and independence. From a commercial point of view, international standardization is no different from creating evaluation criteria for oriental medicinal products, and it is expected that its potential impact on domestic and overseas markets and producers will be large. In particular, the international standardization centered on China can lead to favorable evaluation criteria for China, which may further negatively affect the market competitiveness of domestic raw materials, which have been pushed back by Chinese manufacturers. If the domestic production base is weakened, not only will the farmers suffer but the supply and demand of raw materials will also be manipulated, safety management control will be reduced, and the development of oriental herbal products using domestic raw materials will be hurt. Therefore, in the promotion of international standardization, it is necessary not only to reflect the value of Korean herbal medicine but also to provide strategic responses to protect the domestic production base. However, in the case of recent initiatives, there is no precedent in analyzing influence on the production partners and the related industries. In addition, there are few related papers and reports on the subject, so the publicity process has not been done sufficiently. In response to this, this study will examine the countermeasures against the international standardization of herbal medicines through reviewing its present status and evaluating the agenda of the Korean initiative.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.152-159
• /
• 2016

This paper describes an offset and 1/f noise cancellation technique based hall sensor signal processor. The hall sensor outputs a hall voltage from the input magnetic field, which direction is orthogonal to hall plate. The two major elements to complete the hall sensor operation are: the one is a hall sensor to generate hall voltage from input magentic field, and the other one is a hall signal process system to cancel the offset and 1/f noise of hall signal. The proposed hall sensor splits the hall signal and unwanted signals(i.e. offset and 1/f noise) using a spinning current biasing technique and chopper stabilizer. The hall signal converted to 100 kHz and unwanted signals stay around DC frequency pass through chopper stabilizer. The unwanted signals are bloked by highpass filter which, 60 kHz cut off freqyency. Therefore only pure hall signal is enter the ADC(analog to dogital converter) for digitalize. The hall signal and unwanted signal at the output of an amplifer and highpass filter, which increase the power level of hall signal and cancel the unwanted signals are -53.9 dBm @ 100 kHz and -101.3 dBm @ 10 kHz. The ADC output of hall sensor signal process system has -5.0 dBm hall signal at 100 kHz frequency and -55.0 dBm unwanted signals at 10 kHz frequency.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.161-167
• /
• 2018

Purpose : This study evaluates the usefulness of the Modified Hybrid-VMAT scheme with consideration of background radiation when establishing a treatment plan for multiple bone metastatic cancer including multiple tumors on the same axis. Materials and Methods : The subjects of this study consisted of five patients with multiple bone metastatic cancer on the same axis. The planning target volume(PTV) prescription dose was 30 Gy, and the treatment plan was established using Ray Station(Ray station, 5.0.2.35, Sweden). In the treatment plan for each patient, two or more tumors were set as one isocenter. A volumetric modulated arc therapy(VMAT) plan, a hybrid VMAT(h) plan with no consideration of background radiation, and a modified hybrid VMAT(mh) with consideration of background radiation were established. Then, using each dose volume histogram(DVH), the PTV maximum dose($D_{max}$), mean dose($D_{mean}$), conformity index(CI), and homogeneity index(HI) were compared among the plans. In addition, the organ at risk(OAR) of each treatment site was evaluated, and the total MU(Monitor Unit) and treatment time were also analyzed. Results : The PTV $D_{max}$ values of VMAT, VMAT(h) and VMAT(mh) were 3188.33 cGy, 3526 cGy, and 3285.67 cGy, the $D_{mean}$ values were 3081 cGy, 3252 cGy, and 3094 cGy; the CI values were $1.35{\pm}0.19$, $1.43{\pm}0.12$, and $1.30{\pm}0.06$; the HI values were $1.06{\pm}0.01$, $1.14{\pm}0.06$, and $1.09{\pm}0.02$; and the VMAT(h) OAR value was increased 3 %, and VMAT(mh) OAR value was decreased 18 %, respectively. Furthermore, the mean MU values were 904.90, 911.73, and 1202.13, and the mean beam on times were $128.67{\pm}10.97$, $167.33{\pm}7.57$, and $190.33{\pm}4.51$ respectively. Conclusions : Applying Modified Hybrid-VMAT when treating multiple targets can prevent overdose by correcting the overlapping of doses. Furthermore, it is possible to establish a treatment plan that can protect surrounding normal organs more effectively while satisfying the inclusion of PTV dose. Long-term follow-up of many patients is necessary to confirm the clinical efficacy of Modified Hybrid-VMAT.

• Journal of IKEEE
• /
• v.13 no.1
• /
• pp.77-86
• /
• 2009

A wavelet Electrocardiogram(ECG) detector and its analog-to-digital converter(ADC) for low-power implantable cardiac pacemakers are presented in this paper. The proposed wavelet-based ECG detector consists of a wavelet decomposer with wavelet filter banks, a QRS complex detector of hypothesis testing with wavelet-demodulated ECG signals, and a noise detector with zero-crossing points. To achieve high-detection performance with low-power consumption, the multi-scaled product algorithm and soft-threshold algorithm are efficiently exploited. To further reduce the power dissipation, a low-power ADC, which is based on a Successive Approximation Register(SAR) architecture with an on/off-time controlled comparator and passive sample and hold, is also presented. Our algorithmic and architectural level approaches are implemented and fabricated in standard $0.35{\mu}m$ CMOS technology. The testchip shows a good detection accuracy of 99.32% and very low-power consumption of $19.02{\mu}W$ with 3-V supply voltage.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.53-60
• /
• 2015

Satellite signal is excellent broadband, can provide the same information in a wide range, but there is a disadvantage that much less of the security level of the data. Therefore, supplementation of safety is a serious problem than anything in the satellite communication. In this paper, it was simulated by applying ARIA in encryption technique and by applying transport mode, tunnel mode in security header AH and ESP in order to examine the effect of IPsec VPN. In addition, we had compare with general services that do not apply encryption in order to analyze the impact of the encryption algorithm. Channel, by applying the Markov channel and adding AWGN, is constituted a satellite communication environment. In case of retransmission based error control scheme, we applied Type-II HARQ scheme and Type-III HARQ scheme which are performance is a good way in recently, and it is constituted by a turbo code and BPSK modulation scheme. we were analyzed performance in BER and Throughput in order to compare the simulation more effectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.1-9
• /
• 2008

This paper presents transmission parameters of DH(Dog-Horse) systems based on IEEE802.16e(WiBro) systems. DH requires higher uplink multimedia data rate, which is different from commercial WiBro systems. This paper designes some transmission parameters satisfying the DH system requirements and demonstrates link performance evaluation based on the parameters. For the transmission parameters, the number dwon/up link OFDM symbols are determined by 6/30, respectively. For reliable transmission of control signals, downlink modulation and coding rate are selected by QPSK, 1/2 coding rate and that of uplink is chosen by 16QAM 1/2 and 3/4 coding rate. Based on these parameters, computer simulations demonstrate the system performance of DH system.