• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1541-1542
• /
• 2015

본 논문에서는 휴대용 IT 기기 및 EV, ESS 등 사용이 급증하고 있는 리튬 폴리머 배터리의 화재사고 원인 분석기법에 대하여 나타내었다. 사고 원인 분석기법은 사례분석을 통하여 외형 및 탄화패턴 분석을 통한 발화 추정위치로 외력에 의한 사고 및 내부 절연 열화에 의한 사고 원인 분석 등을 나타내었다. 사고원인 분석은 배터리 안전성 확보와 사고 재발 방지를 위한 대책 마련에 필수적인 기술로 향후 증가하는 제품사고에 대한 분석기법 개발에 기초연구로 활용하고자 한다. 본 논문에서 제시한 분석기술과 향후 내부 절연 열화 원인 분석 기법을 개발하여 리튬 계열 배터리에서 발생하는 사고에 대하여 정확한 원인 분석에 활용할 것이다.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.97-105
• /
• 2003

Although Construction Failure Information has been reported in literatures, reports of research, and etc., it Is difficult to utilize the information because the information classification does not exist. Therefore, this study investigated and analyzed literatures of domestic and abroad research Institutions and suggested the Construction Failure Information Classification(CFIC). The CFIC is composed of four classified items; facility general information, failure situation information, failure cause Information, and failure counterplan information. Each item is divided sub-items. Through CFIC, Construction Failure Information can be standardized and utilized for useful data to prevent recurrences of construction failure.

• Journal of the Korean Institute of Gas
• /
• v.22 no.1
• /
• pp.9-17
• /
• 2018

In the consideration of the working conditions, which have several kinds of works operating at the same time, at construction sites, it is difficult to prevent industrial accidents. There are a number of works to employ flammable materials and hot works simultaneously operated without fire protection systems. It causes a huge fire and casualties. In this research to analyze an accident case, the reasonable prevention methods are suggested throughout the property tests for the organic solvents and the analysis of the behavior for vapour cloud in the underground area of the construction site.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.6-11
• /
• 2010

The continuous fatal accidents like explosion or fire cause huge losses of both life and property in laboratories even though safety management system has been built and periodical checkups and safety diagnosis have been implementing in universities and enterprise-affiliated research institutes since Act on the Establishment of Safe Laboratory Environment was enacted in 2005 to prevent accidents in research laboratories. Cause analysis and safety management measures to prevent recurrence of accidents are urgently needed because accidents in research laboratories occur repeatedly with similar contents. This study will show results of analysis on incidents and accidents occurred in laboratories in universities and enterprise-affiliated research institutes using Root Cause Analysis Method and propose classified map of cause investigation and improvements so as to improve safety management in research laboratories.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.1
• /
• pp.259-273
• /
• 2016

After realizing through the three large-scale data leakage incidents that intentional or accidental insider jobs are more serious than external intrusions, financial companies in Korea have been taking measures to prevent data leakage from occuring again. But, the IT system architecture reflecting the domestic financial environment is highly complicated and thereby difficult to grasp. It is obvious that despite administrative, physical, and technical controls, insider threats are likely to cause personal data leakage. In this paper, we present a process that based on metadata defines and manages personally identifiable attribute data, and that through inter-table integration identifies personal information broadly and controls access. This process is to decrease the likelihood of violating compliance outlined by the financial supervisory authority, and to reinforce internal controls. We derive and verify a decision-making model that reflects the proposed process.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.515-520
• /
• 2020

The development of autopilot system and flight management system (FMS) equipment in today's aircraft navigation can be attributed to the reduction of pilots' workload and the navigation safety. The effect of autopilot and FMS equipment is greater, especially in heavy airport traffic or complicated of the departure. However, some airport specific departure procedures result in an uncommanded turn event due to an error in the FMS, causing aircraft to deviate from the center line of the route. With most departure procedures requiring area navigation (RNAV) operation, pilot situation awareness and corrective action are the only ways to minimize aircraft deviation to maintain the safety of area navigation. Through analysis of the occurrence status of the uncommended turn event by aircraft type, airport and flight phase, and comparative analysis of the survey results of foreign airlines and the airlines self-reduction plan with the aircraft manufacturer's corrective action, it is intended to give implications for the need for more fundamental measures to prevent recurrence of such events.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.220-220
• /
• 2021

2020년 장마는 6월 중순부터 8월 중순까지 전국적으로 평균 687 mm의 강수가 내려, 1973년 이후 역대 2위 강수량을 기록하였으며, 연이은 태풍으로 큰 인명 및 재산 피해가 발생하였다. 특히, 섬진강 및 한탄천 등에서 계획홍수위를 초과하는 홍수로 인해 상당수의 제방이 월류로 인해 붕괴된 것으로 나타났다. 따라서, 향후 기후변화에 따른 연평균 강수량이 증가할 것으로 전망되는 가운데 집중호우로 인한 제방 붕괴 피해를 최소화하기 위한 고도화된 기술 개발을 통한 선제적 재발 방지대책이 필요한 시점이다. 한국건설기술연구원은 바이오폴리머라는 새로운 친환경 신소재를 이용하여 제방의 안정성 평가 기술 개발 연구를 수행하고 있다. 이에 안동하천연구센터에서는 실규모에 준하는 제방모형(높이 3 m, 사면경사 1:2, 길이 10 m 이상)을 제작하고, 제방 표면에 바이오폴리머 신소재를 처리하여 전방 월류 흐름 유도에 따른 실규모 제방붕괴실험을 수행하였다. 또한, 신소재 보강 및 무보강 조건에 따른 영상분석 기반 붕괴지연효과를 정량적으로 분석하여 신소재의 성능을 평가하였다. 하지만, 기존에 수행된 실험은 댐 붕괴 흐름과 같이 홍수파가 발생하여 제내지로 퍼져 나가는 형태로 진행되어, 보강공법의 검증에 있어 실제 하천에서 발생하는 횡월류 흐름을 재현하지 못한다는 한계를 가지고 있다. 본 연구에서는 횡월류 흐름(0.6 m³/s 이상)을 발생시켜 수리실험에 따른 축척효과(scale effect)를 최소화하고, 현장에 대한 충분한 자연성을 재현하는 것을 목표로 하여 실험을 수행하였다. 실험 조건은 1) 신소재가 처리된 식생 제방, 2) 신소재가 처리되지 않은 식생 제방으로 각각의 조건에 따른 횡월류 흐름 및 제방 붕괴를 유도하여 영상분석 기법(이미지 픽셀분석 및 3D 포인트 클라우드 모델링)을 통한 침식 저항에 관한 분석결과를 제시하였다.

• The Korean Society of Law and Medicine
• /
• v.19 no.1
• /
• pp.81-111
• /
• 2018

Recently in Korea, public interest about patient safety has increased because patient safety incidents occurred continuously. In addition, as the way of coping with medical personnel and medical institutions after occurrence of patient safety incident became controversial, the necessity of introducing apology law and disclosure law was raised. We analyzed the contents of apology law and disclosure law in U.S.A and critically examined the legislative movements in Korea. First, the Apology law requires that a medical personnel provide apology, consolation, sympathy to the patient for discomfort, pain, damage or death, and that the expression of apology shall be inadmissible as evidence of an admission of liability in civil action or administrative proceeding. The Apology law is divided into 'full apology law' and 'partial apology law' depending on whether mistake, error, fault, liability, and legal liability shall be inadmissible. Meanwhile, Disclosure law enforces or voluntarily enforces the law to communicate with the patient regarding the disclosure of the incident, the cause of incident, the compensation plan, and the measures to prevent the recurrence in the adverse incident that serious harm to the patient. In Korea, the concern about patient safety incidents has been amplified, and as the importance of communication between the medical personnel and patient has been recognized, the revision bill for the "Patient Safety Act", which adopted the U.S.A apology or disclosure law, was submitted to the National Assembly. The purpose of this study was to critically review the contents of the revised legislation based on the analysis of the apology law and disclosure law in U.S.A. and to provide implications for future legislative direction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.193-201
• /
• 2017

Financial firms strengthen to protect personal information from the leakage, introducing various security solutions such as print output security, internet network Isolation system, isolationg strorage of customer information, encrypting personal information, personal information detecting system, data loss prevention, personal information monitoring system, and so on. Financial companies are also entering the era of cutthroat competition due to accept of the new channels and the paradigm shift of financial instruments. Accordingly, The needs for security for customer information held by financial firms are keep growing. The large security accidents from the three card companies on January 2014 were happened, the case in which one of the outsourcing personnel seized customer personal information from the system of the thress card companies and sold them illegally to a loan publisher and lender. Three years after the large security accidents had been passed, nevertheless the security threat of the IT outsourcing workforce still exists. The governments including the regulatory agency realted to the financail firms are conducting a review efforts to prevent the leakage of personal information as well as strengthening the extent of the sanction. Through the analysis on the application of security policy for outsourcing personnel in case of large-scale Financial IT projects and the case study of appropriate security policies for security compliance, the theis is proposing a solution for both successfully completing large-scale financial IT Project and so far as possible minizing the risk from the security accidents by the outsouring personnel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.854-867
• /
• 2014

In the circumstance that high oil price state is continued over the world, the investment in crude oil development by oil major is a trend of increasing. Recently the number of delivered drill-ship for 5 years has been sharply increased all over the world and about twice than that of past 30 years. As addition to the increase of the drill-ship demand, the operation of drill-ships which is delivered recently is about 3,000 meters, ultra deep sea, on average and the work area is expending. Accordingly the drilling system including the size and length of pipe for drilling has been bigger and bigger and the power supply equipment for operation system also has large capacity. Unlike merchant vessel, high power and high voltage of diesel generators are required for drill-ship for which the demand for V-type 320 bore of diesel generator has increased. It is on the raised that the importance of lubrication oil cleaning for diesel generator on drill-ship which has longer time for construction, and also long term low load operation is unavoidable during commissioning of equipments. Recently it was reported that engine crankpin was damaged due to the hard contact caused by the abnormal wear down(Cam wear) on crankpin and bearing. The same pattern of wear down was found through the inspection on series vessels and the other vessel under commissioning. The purpose of this paper is to analyze of the wear mechanism based on the observation and theories and objective research from actual cases and to prepare the counter measures to avoid foreseeable damage when the lubricating oil is not properly cleaned.