• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.961-967
• /
• 1999

A model is constructed to evaluate the mode III stress intensity factor(SIF) for orthotropic three-layered material with a center crack subjected to uniform anti-plane shear loading. A mixed boundary value problem is formulated by Fourier integral transform method and a Fredholm integral equation of the second kind is derived. The integral equation is numerically analyzed to evaluate the effects of the ratio of shear modulus, strength of each layer and crack length to layer thickness on the stress intensity factor.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.730-735
• /
• 2007

This study is a comparison of the results of the orthropic material analysis at cantilever beam model using boundary element(BEM) method and finite element method(FEM). The program with the orthotropic material analysis was developed and applied to the examples in order to evaluate the accuracy of the programs. The examples shows that the results of the BEM is a good agreement with the ABAQUS results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.713-719
• /
• 2008

Most of the MEMS parts are made of multi-grain silicon wafer, which is the orthotropic material and its material direction is arbitrary. The reliability of the parts must be guaranteed in order to use for the commercial usage. The need of the structural analysis of its parts emerges an important factor. The material properties of the MEMS parts are calculated by the numerical method in order to reduce a material test. In this study, the effective elastic modulus and its Poisson's ratio are calculated by the boundary element method(BEM) and are compared with the results by the finite element method(FEM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.539-542
• /
• 2004

전자기기의 발달과 더불어 정보통신분야의 발달로 고주파 대역에서 우수하고 안정적인 Ni-Zn 페라이트를 제조하기 위해, Ni(니켈)의 일부를 코발트(Co)로 치환하여 결정자기이방성 상수 값을 증가시켜, 공명 주파수를 고주파 대역으로 높이고자 하였다. Co 함량이 증가함에 따라 투자율은 감소하는데, 이는 결정자기 이방성 상수를 크게 하여 공명 주파수를 높이는 결과를 보였으며, x=0.05에서 투자율 75, 공명 주파수 20MHz의 특성을 나타내었다.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.187-194
• /
• 2009

This paper presents the development of transfer function accounting for cross-anisotropic behavior of aggregate base material for the pavement thickness design. The stress distributions predicted by nonlinear cross-anisotropic finite element program were realistic by eliminating excessive tensile stress at the bottom of the base layer and the critical pavement responses predicted by nonlinear cross-anisotropic model are higher than those predicted by linear or nonlinear isotropic models (Kim, 2004, Kim et at., 2005). Since the previously developed transfer functions such as Asphalt Institute and Chevron models, etc. were based on the critical responses obtained from linear isotropic model, those equations are not appropriate for the thickness design nonlinear cross-anisotropic base behavior. Therefore, the development of usable transfer functions for nonlinear cross-anisotropic model is ever more important. When the newly developed transfer functions were compared with AASHTO method for the thickness design, the newly developed transfer functions produce approximately 25mm reduced UAB thickness in AASHTO thickness design and this illustrates that linear isotropic model results in more conservative pavement design.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.42-48
• /
• 1991

The basic soft magnetic characteristics of a typical Fe based amorphous $Fe_{80}B_{15}Si_{5}$ alloy were measured with pulse metheod. Quantitative relations between magnetostriction, anisotropy energy, reluctivity were investigated. The relative contribution factor of magnetostrictive and uniaxial anisotropy energy to the reluctivity were calculated. The internal stress and induced anisotropy were estimated. A tension applied to the long axis of the sample greatly enhanced induced anisotropy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.895-903
• /
• 1987

This paper investigates the problem of cracks emanating from a circular hole in an orthotropic infinite plate. The mixed-mode stress intensity factors are obtained by using the modified mapping-collocation method. To investigate the effect of anisotropy and circular hole boundary on crack tip singularity, stress intensity factors are considered as functions of the normalized crack length for various types of laminated composite. The results indicate a strong dependence of the stress intensity factor on the material anisotropy and geometry.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.306-314
• /
• 1990

SrO-5.7Fe$_{2}$O$_{3}$의 Magnetoplumbite형 Sr페라이트에 첨가제 SiO$_{2}$, H$_{3}$BO$_{3}$CaCO$_{3}$, SrCO$_{3}$을 0.1-0.1wt%로 변화시켜 만든 등방성과 이방성의 자기이력곡선, 밀도, 감자곡선, 고유보자력 및 미세구조특성에 미치는 영향을 조사하였다. 위 첨가제는 페라이트 생성 및 특성개선에 효과적이었도 특히 등방성에서의 입도크기를 3.5.mu.m에서 1.7.mu.m로 하였을때 소결온도가 40.deg.C 낮은 1220.deg.C에서 잔류자속밀도가 2300G, 보자력이 1950Oe, 밀도가 4.51g/Cm$^{3}$, 교유보자력이 3500Oe로 각각 증가하였다. 이방성은 등방성 보다 원등히 우수하였고 최대에너지적 (BH)$_{max}$이 소결온도가 10.deg.C 낮은 1210.deg.C에서 1.13으로 부터 3.3MGOe로 증가하였다. 이값은 이론치의 61%에 도달하고 있다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.365-368
• /
• 2000

자왜 재료는 자계 포화 이하에서 비선형 특성을 갖는다고 알려져 있다. 그러나 지금까지 비선형 특성을 표현하는 자왜 재료의 구조 방정식을 유도한 사례는 전무한 실정이다 본 연구에서는 자계 포화 이하에서 비선형 특성을 갖는 자왜 재료의 비선형 구조 관계식을 유도하였다. 나아가 유도된 구조 관계식을 이용하여 자왜 재료 내의 파동 방정식을 정식화하였다. 그리고 비선형 특성을 갖는 자왜 재료에서 평면파가 자계 방향을 따라 전파될 때 이방성 자왜 재료를 등방성 재료로 가정하여 종파와 횡파 속도를 구하였다.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.913-920
• /
• 1995

RFe$_2$(R=rare earth) Laves Phase intermetallic compounds are one of the promising materials for magnetostrictive applications, due to large magnetostriction coefficients in the order of 10$^{-3}$ . However, because RFe$_2$intermetallic compounds have large magnetostriction constants as well as large magnetocrystalline anisotropy constants, a large external magnetic field is necessary to reach saturation magnetostriction. Hence researches on giant magnetostriction have been concentrated on producing materials exhibiting a high value of magnetostriction in a low magentic field. The main research trend of the giant magnetostriction to obtain the large value in the low magnetic filed, fortunately as the signs of magnetocrystalline anisotropy constans in RFe$_2$intermetallic compounds alternate with the rare earth metals, has been to substitute the rare earth metal for others and hence to reduce the magnetocrystalline anisotropy energy. In addition, amorphous RFe$_2$alloys have been researched. In this research, both of the methods which are substitution of the rare earth metal and amorphization in RFe$_2$ intermetallic compounds are simultaneously conducted to obtain the large magnetostriction coefficient in the low external magnetic field. Among them, SmFe$_2$and PrFe$_2$are selected, and amorphized in substrate-free bulk state. Magnetism in amorphous bulk (Sm$_{1-x}$ Pr$_{x}$) Fe$_2$alloys is investigated in the low magnetic field.ld.