• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.1-6
• /
• 1993

The possession of microwave range, oven and oven-microwave range has been greatly increased with 88 Seoul Olympic Game as a momentum, and the possession rate was by 68%. The respondent answered the function of microwave range to be more necessary than that of oven, and the two household commodities have been mostly used to reheat and heat simply prepared frozen foods. The 35% among total respondent wished to cook the prepared frozen foods like pizza, but the 87% prefered to cook bakery. The frequencies of the use of oven were 35%, 35% for cooking premix and raw materials, and 20%, 20% for cooking half-prepared and prepared foods, respectively. The respondent of 39% was interested in premix foods as a future preference for food forms, and the respondent with interest in half-prepared food was 30%, but the preference for raw materials and prepared foods showed a trend to be decreased. The respondent of 60ft had eaten out six times week, and 50% had eaten instant and fast foods 1~3 times week. As the results of this survey, most of consumers prefer to more convenient foods. Therefore, it is expected that the function of oven and microwave range would be widely useful if various foods are improved with regards to convenience for use and preference.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.557-564
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast overpressure is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, information and test results related to the blast experiment of internal and external have been limited due to military and national security reasons. Therefore, in this paper, to evaluate blast effect on reinforced have concrete structure and its protective performance, blast tests are carried out with $1.0m{\times}1.0m{\times}150mm$ reinforce concrete slab structure at the Agency for Defence Development. The standoff blast distance is 1.5 m and the preliminary tests consists with TNT 9 lbs and TNT 35 lbs and the main tests used ANFO 35 lbs. It is the first ever blast experiment for nonmilitary purposes domestically. In this paper, based on the basic experiment procedure and measurement details for acquiring structural behavior data, the blast experimental measurement system and procedure are established details. The procedure of blast experiments are based on the established measurement system which consists of sensor, signal conditioner, DAQ system, software. It can be used as basic research references for related research areas, which include protective design and effective behavior measurements of structure under blast loading.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.2 s.40
• /
• pp.63-77
• /
• 2006

The Purpose of this study is to provide the basic data for the improvement or the contents or clothing curriculum in the 7th technology home economics of middle school. The standard of satisfaction of students' according to the detail domains and the standard of necessity and practical use and learners' patterns of activity task suggested in textbooks were evaluated. The ninth grade 169 boy students and 336 girl students in the national capital region were participated in this survey. According to the survey results, firstly, a dress domain got the highest relative importance(28.56%) while a clothes material domain took the lowest relative importance(8.07%) among various detail domains. Secondly, the standard of satisfaction according to each detail domain fell below the average. Generally girls' satisfaction for teaching was higher than boys'. Thirdly, a clothes material domain showed the lowest necessity for textbook contents according to detail domain and other domains showed above the average. The necessity for textbook contents appeared high for boy students rather than girl students. In addition, boy and girl students did not have interest in content relevance in textbook. Especially, they could not do well and understand experiments and practices in clothing section. Finally, The degree of utilization of the activity task ill textbooks was very low. Among various activity tasks, the learning by discovering and exploring were more utilized than cooperating learning.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.616-642
• /
• 2021

Improving public awareness of wood is essential for achieving the goal of establishing wood culture by expanding the use of wood. This study presents a basic examination of the strategy of revitalizing wood culture and a survey of its current status and requirements. The survey was divided into seven categories: awareness of wood culture; use characteristics of wood culture; preference and demand for wood culture; awareness of sub-fields of wood culture; awareness of the cultural resources of wood; trends of wood utilization; and wood-related living environment. Based on the survey results, the study analyzed four items: awareness of wood and cultural experience; awareness of the cultural resources of wood; wood-related living environment and trends of wood utilization; and preference and demand for wood culture. In this study, the public awareness of wood and cultural experiences, the first of four items, was analyzed using the survey results. Generally, wood and wood culture are viewed as materials and a cultural heritage, respectively. Moreover, wood is ecofriendly. However, no substantial difference was observed between the two perceptions. Forty-five percent of the respondents reported that using wood exerts a positive effect on the body and mind. However, such use also destroys forests. Additionally, the recognition of wood-related workers, such as engineers or skilled workers, was relatively low compared with educators, such as wood education experts. Moreover, less than 50% of the respondents answered that major projects related to wood culture are well-known, whereas 30% participated in wood education, such as woodworking experience, where the majority required hand tools. Furniture, wooden accessories, and wooden buildings were among the objects that individuals intended to make through the wood culture program. Approximately 23% of the respondents were aware about the wood culture experience center, while approximately 50% had visited it. The response rate to woodworking technology was 73%, where the highest response was found for wood education experts. To improve public awareness about wood, the importance of entertainment factors over educational factors should be considered in the experience of individuals. To provide opportunities to experience wood culture for more individuals, developing and actively promoting various contents, including entertainment elements, are necessary.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.141-152
• /
• 2015

The objective of this study is to estimate shear wave velocity of rockfill materials by making practical use of the micro-earthquake records which are ordinarily obtained at a domestic rockfill dam and to verify its applicability. Micro-earthquake records were obtained at the site of Heongseong dam and Soyanggang dam, which are the existing multi-purpose dams in Korea. In the previous study, the fundamental periods of each dam were already evaluated by analyzing the response spectrum of the observed records. In this study, numerical analyses varying shear moduli of rockfill zone were carried out using the acceleration histories measured at the abutment as input ground motions. From comparison between the fundamental periods calculated by numerical analyses and measured records, the shear wave velocities with depth were estimated. It is found that the effect of different earthquake events on shear wave velocity estimation for the target dam materials is negligible and the shear wave velocity can be consistently evaluated. Furthermore, comparing the shear wave velocity with the previous researchers' empirical relationships and field test results, applicability of suggested method is verified. Therefore, in case that it is impossible to conduct field tests and estimation is preliminary, the suggested method can be practically used.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.1-10
• /
• 2012

Along with the development of coasts, islands and mountains, the demand of long-span bridges increases which, in turn, brings forth the construction of cable-supported bridges like suspension and cable-stayed bridges. There are various types of statically indeterminate structures widely applied that supported the main girder with stay cables, main cables, hanger cables with aesthetic structural appearance. As to the cable-supported bridges, the health monitoring of a bridge can be identified by measuring tension force on cable repeatedly. The tension force on cable is measured either by direct measurement of stress of cable using load cell or hydraulic jack, or by vibration method estimating tension force using cable shape and measured dynamic characteristics. In this study, a method to estimate dynamic characteristics of hanger cables by using a digital image processing is suggested. Digital images are acquired by a portable digital camcorder, which is the sensor to remotely measure dynamic responses considering convenient and economical aspects for use. A digital image correlation(DIC) technique is applied for digital image processing, and an image transform function(ITF) to correct the geometric distortion induced from the deformed images is used to estimate subpixel. And, the correction of motion of vision-based measurement system using a fixed object in an image without installing additional sensor can be enhanced the resolution of dynamic responses and modal frequencies of hanger cables.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.23-30
• /
• 2010

Seismic qualification (SQ) is required prior to the installation of safety related electrical cabinets in nuclear power plants (NPPs). Modal identification of the electrical equipment is one of the most significant steps to perform SQ, and is an essential process to construct a realistic analytical model. In this study, shaking table tests were conducted to identify a variation of the dynamic characteristics of a seismic monitoring system cabinet installed in NPPs according to the excitation level. Modal identification of the cabinet has been performed by a frequency domain decomposition method. The results of this study show that the dynamic properties of the cabinet are nonlinearly varied according to the excitation level and the specimen behaves significantly in a nonlinear manner under safe shutdown earthquake motion in Korea. The main sources of the nonlinear behavior of the specimen have been judged by friction forces and geometrical nonlinearity rather than material nonlinearity. The nonlinear variation of the dynamic characteristics of the electrical cabinet might be accepted as an important fact that should be considered during the SQ of safety related equipment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.5
• /
• pp.758-764
• /
• 1995

A survey on the kimchi preference among elementray school students in Pusan was conducted in April of 1995 to get basic information needed for the development of special kimchi for the children. Total of 1100 children in 2nd, 4th and 6th grade from public and private elementary school participated in this survey. Sixty eight percent of students answered that they like kimchi. However, kimchi preference(17.6%) among other side dishes-pork cuttlet.ham.sausage(54.1%), egg roll(9.4%), soysauced beef(8.2%), toasted laver(6.3%), bean sprout namul(3.0%), danmooji(1.0%), and squash namul(0.4%)-was relatively low. It can be interpreted that elementary school student prefers processed food specially animal food to kimchi. The hot taste of the kimchi was the number one reason of their dislike of kimchi, and it was the most important reason for those also like kimchi. Thus it can be thought as the representative taste of kimchi. Chinese cabbage kimchi was found to be the most favorite kimchi and kakdugi(seasoned pickles of cubed radish), nabak-kimchi(mildly seasoned water based kimchi that is mixture of chinese cabbage and cubed radish) and jchonggag kimcchi(seasoned pickles of pony tail radish) and cucumber kimchi were followed in order. Among the various ingredients in kimchim children like cabbage best but they didn't like galic, ginger, green onion and fermented fish sauce which give strong flavor in kimchi.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.12-20
• /
• 2020

Purpose: This study was designed to analyze the relationship between the presence and severity of depression and chewing problems (CPs) in a representative sample of the general population. Materials and Methods: Health surveys and examinations were conducted on a nationally representative sample (n = 8150) of Korean was conducted. CPs was determined by a simple survey response concerning "Do you feel uncomfortable about chewing your food because of problems with your mouth such as teeth, dentures and gums?" Depression was defined as individuals with a total score ≥ 10 on the Patient Health Questionnaire (PHQ)-9 survey. Data regarding demographics, socioeconomic history and comorbid health conditions were used to analyze adjusted logistic regression models. Results: In the Korean population, the prevalence of depression was significantly greater in individuals with CP (17.2%) than in those without CP (10.2%). On multivariate logistic regression analysis, the presence of depression was significantly associated with CPs (adjusted odd ratio [aOR]: 1.90, P < 0.001). The risk of CPs increased with increasing severity of depression as follows: severe depression (OR: 2.62, P < 0.001), moderately severe depression (OR: 2.19, P < 0.001). Conclusion: The presence of depression was significantly associated with CPs, especially in severely depressed individuals. Depression screening should be considered in treating CP patients.