• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.275-280
• /
• 1999

This study is object to program development of fatigue test for universal testing machine. Fatigue program is consist of test simulation, data analysis and print report by control fatigue testing program which expansively applies tension-compression tests with using oil pressure mechanism by Visual Basic software running under windows 98.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.663-668
• /
• 1996

하나로를 이용한 재료조사시험용 계장캡슐 개발에 앞서 캡슐 mock-up (96M-01K)을 제작하였으며, 이 캡슐 mock-up의 실제 하나로 조사시험공 장입시를 가정하여 강도 및 열적 건전성 평가를 수행하였다. 평가 결과 하나로 정상출력시 (30MW) 캡슐 mock-up 내 조사시료의 온도는 진공 및 heating system을 사용하여 279~473$^{\circ}C$ 범위로 조절될 수 있었으며, 목표 조사기간 동안 캡슐 mock-up은 강도적으로 허용기준을 충분히 만족함으로써 안전한 것으로 판명되었다. 향후 본 캡슐 mock-up을 이용한 노외 simulation 실험 등을 통하여 기존 캡슐 mock-up의 건전성을 확인한 후 이를 기준으로 하여 표준형 하나로 캡슐을 설계 .제작하고자 한다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.923-926
• /
• 2008

Currently more high flow and high performance concrete is used for construction of buildings in the world. However, when high flow and high performance concrete put high performance water reducing agent in quantity to improve flow, it has a negative effect on concrete structures since segregation arises from it though flow will be improved. There are naked-eye observation, coarse aggregate washing test, L Flow test for permeation among reinforcing rods and measurement of viscosity to judge concrete segregation resistance. However, it is difficult to apply them to practical affairs since they are very complicated and troublesome. Therefore, the study analyzed EIS dividing slump flow value into slump value, how to valuate concrete segregation resistance more easily, on the basis of the existing reference materials to propose EIS. As the results, in the event of high flow concrete, it is desirable that EIS value is prescribed to be less than 2.5 at the time of managing segregation. Also, at the time of prescribing EIS with performance, it is judged that it is desirable to manage segregation as less than 2.2 (Grade 1), 2.2$\sim$2.4 (Grade 2) and more than 2.6 (Grade 3).

• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.5-11
• /
• 2011

This paper recommends the alternative back-fill material for the pre-insulated pipe based on the results of tests performed using different kinds of backfill material. In this study, laboratory tests were preformed to determine the behavior of the pre-insulated pipe caused by variation on grain size distribution, friction characteristics and earth pressure characteristics of different types of backfill material. Two types of natural sand (fine-grained and coarse-grained sand) and crushed sand, and two types of gravel (10mm, 20mm) were used as backfill material in the laboratory tests. The laboratory test results were analyzed and compared with the pre-insulated pipe backfilled with the standard medium-grained sand. Based on the evaluation and comparison of laboratory test results, it was determined that crushed sand is the most suitable back-fill material that can be used as an alternative for medium grained sand for pre-insulated pipes.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.8
• /
• pp.17-21
• /
• 2017

This paper is to grasp the use of impact-echo response signal induced from impacting an object for the assessment of compressive strength of construction materials nondestructively and to propose the test results. For this study, an impact device was devised and used for impacting an object by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Concrete test specimens which had been mixed for different strengths were tested and the impact echo response signal was measured for each test specimen. The total sound signal energy which is assessed from integrating the impact-echo response signal was compared with the directly measured compressive strength for each specimen. The comparison showed that the total sound signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of construction materials can be assessed nondestructively using total sound signal energy which is assessed from integrating the impact-echo response signal induced from impacting an object.

• Composites Research
• /
• v.16 no.6
• /
• pp.48-55
• /
• 2003

This research makes comparisons of empirical fatigue-lives between AC8A A1 alloy and the metal matrix composites(A1/A12O3, A1/A12O3/A12O3p), and also includes comparisons of fatigue-lives between empirical fatigue-lives and estimated fatigue-lives from regular-periodic load testing, AE method to predict fatigue-crack initiation before visible in sight and SEM(scanning electron microscope) photographs of each material. According to the test results of the notched specimen. the fatigue life of the hybrid metal matrix composites and the metal matrix composites, which are more brittle than the base matrix was shorter than that of the base matrix under both types of loads. In addition, the fatigue-life estimated from the damage summation method and that from experiments at random loads were fairly identical.

• Composites Research
• /
• v.16 no.6
• /
• pp.41-47
• /
• 2003

Composites are widely used for aircraft, satellite and other structures due to its good mechanical and thermal characteristics such as low coefficient of thermal expansion(CTE), heat-resistance, high specific stiffness and specific strength. In order to use composites under condition of high temperature, however, material properties of composites at high temperatures must be measured and verified. In this paper, material properties of T700/Epoxy were measured through tension tests of composite specimens with an embedded FBG sensor in the thermal chamber at the temperatures of RT, $100^{\circ}$, $200^{\circ}$, $300^{\circ}$, $300^{\circ}$. Through the pre-test of an embedded optical fiber, we confirmed the embedding effects of an optical fiber on material properties of the composites. Two kinds of specimens of which stacking sequences are [0/｛0｝/0]$_{T}$. and [$90_2$/｛0｝/$90_2$]. were fabricated. From the experimental results, material property changes of composites were successfully shown according to temperatures and we confirmed that fiber Bragg grating sensor is very appropriate to strain measurement of composites under high temperature.

• Polymer(Korea)
• /
• v.38 no.3
• /
• pp.327-332
• /
• 2014

Polymer/wood flour composites are recently attracting a lot of interest because they are economic and ecofriendly. In this study, the effects of wood flour size on the thermal and mechanical properties of a polypropylene/wood flour composite were investigated. Mechanical properties of the composite samples prepared by melt-mixing and compression molding were tested by UTM and an izod impact tester, and thermal properties of them were measured by TGA, DMA, DSC and TMA. The best coupling agent was selected by testing three kinds of maleic anhydride modified polypropylene coupling agents, and under the same condition, the effects of wood flour size on the physical properties of the composite were investigated. According to the test results for four different wood flour sizes of 600, 250, 180 and $150{\mu}m$, flexural strength, flexural modulus, crystallinity and water-resistivity of the composite increased with decreasing wood flour size.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.325-325
• /
• 2011

자연과 함께하는 하천복원 기술개발(Ecoriver21) 연구단에서 진행 중인 홍수터 수목관리 기술 개발 과제에서는 국내하천 흐름저항 산정기법을 개발하기 위해 2006년부터 2009년까지 총 27개 시험하천의 실측자료를 이용한 조도계수를 산정하였다. 2010년에는 18개 시험하천을 추가로 운영하여 최종적으로 총 45개 하천의 조도계수를 산정하고자 한다. 조도계수 계산에 필요한 자료는 모두 현장에서 직접 측정하였으며 이를 위해 넓은 범위의 수위자료를 획득할 수 있는 홍수기 이전에 수위계를 설치하였고, 유량 측정, 하천 단면 측량, 하상재료 입경분석 등을 통하여 유량 변화에 따른 조도계수 분석, 하상재료 크기별 조도계수 변화 분석, 조도계수 경년변화 분석 등의 연구를 진행하였다. 분석 결과 대부분의 하천은 유량이 증가함에 따라 조도계수가 감소하는 경향을 보였고 특정한 유량 범위에서 수렴하였다. 유량에 따른 조도계수 변화 폭은 하상재료의 입경 크기가 클수록 심하였다. 산지 거석하천인 내린천 왕성동 지점의 경우 0이 287.8 mm로 조사 지점 중 하상재료의 크기와 유량에 따른 조도계수 변화 폭, 수렴되는 조도계수 값이 가장 컸다. 하상재료 입경 크기 $D_{50}$을 기준으로 2 mm이하인 모래하천의 경우에는 유량이 증가함에 따라 조도계수가 감소하다가 고유량에서 다시 증가하는 경향을 보였다. 조도계수 경년변화를 분석한 평창강 방림 지점과 만경강 고산 지점의 결과는 비교적 큰 차이를 나타내지 않았고, 한강 본류의 배수영향을 받는 옥동천 옥동, 법천천 법천 지점의 경우 배수 상황 발생 시 다른 지점과 달리 상당히 복잡한 양상을 나타내었다. 본 연구에서는 지금까지 진행된 국내하천의 조도계수 분석 자료를 종합하여 조도계수 자료집을 발간할 계획이며, 조도계수 자료집에는 각 지점의 수위 및 유량 실측자료, 하상재료 입경 크기, 지점 특성, 사진 자료 등이 포함될 예정이다.

• Composites Research
• /
• v.36 no.1
• /
• pp.25-31
• /
• 2023

Composite structures have been designed by stacking the laminae with different stacking angles to meet the required mechanical performance. Although the induced stresses on the composite structures under the external loads usually differ depending on the location, we determined the stacking sequence based on the maximum stress, which leads to low efficiency and generally is not the optimum design. Recently, piecewise integrated composites (PICs) were suggested for solving this inefficiency. PICs assume the perfect bonding between adjacent pieces, but this is ideal and hard to accomplish. Therefore, the overlap at the boundary is essential to prevent separation from each other. In this study, we investigated the effect of the overlap design on the impact failure mode of PIC plates. We fabricated the sample composite plates with different overlap designs using the fast curing carbon prepreg and conducted the impact tests according to ASTM D 7136. We found that PICs had different failure modes according to the overlap design, which lead the changes of absorbed impact energies as well as impact load curves.