• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.407-415
• /
• 2009

To investigate the effects of seeding date, nursery days and plug cell size on seedling growth and quality of waxy corn. This study was carried out in the field of the National Institute of Crop Science in 2007. Varieties used were two waxy corn hybrids cvs. Chalok# 1 and Chalok# 4. The plant height, number of leaves and dry weight of waxy corn seedlings were significantly affected by seeding dates and plug cell size, while no differences between varieties. The growth of seedlings was faster in March 14 seeding than in May 8 and July 4 seedings. Based on plant height, March 14 seeding, May 8 seeding and July 3 seeding reached suitable size for transplanting after 30 days (21.6cm), 15 days (25.5~26.9cm) and 10 days (21.6~24.0cm) in the nursery, respectively. Seedlings of March 14 seedling and May 8 and July 3 seeding reached suitable number of leaves i,e. 2~3 leaves, 15~20 days after seeding on March 14 and 10 days after seeding on May 8 and July 3. Dry weights of 30 days seedling for March 14 seeding, 20 days seedling for May 8 seeding and 15 days seedling for July 3 seeding were 0.43g, 0.57~0.67g and 0.53g, respectively, and the dry weight of seedlings increased by 2~3 folds at the later nursery days. The suitable nursery days of waxy corn were 20 days on March 14 seeding and 10~15 days on May 8 or July 3 seeding.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.151-161
• /
• 2014

Sesame lignan, including sesamin and sesamolin has been reported to have various content according to accessions and environmental factors. The objective of this study were to analyze the lignan variation of 143 sesame accessions from core collection in Korea and to test the effects of growing years and locations on lignan and lipid content of Korea sesame elite lines. The results showed that the core sesame germplasm in Korea has broad variation of lignan content from 2.33 to 12.17 mg/g with an average 8.18 mg/g. Among tested sesame accessions, the IT184615 had the highest lignan content of as 12.17 mg/g. So this accession will be a good genetic resource for developing a high lignan sesame variety. The sesamin and sesamolin content for sesame accessions across origin had significant difference. The average lignan content of accessions collected from Russia (10.0 mg/g) and Nepal (9.08 mg/g) were relatively higher than other countries. The sesamin and sesamolin content for sesame accessions across seed coat color had significant difference. The average lignan content of sesame with white, brown and black seed coat color was 8.61, 7.51, and 5.49 mg/g, respectively. The variation of lignan and lipid content was significantly different across elite lines, locations and growing years. Therefore, it is important to find sesame accessions having high lignan content with environmental stability.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.5 no.2
• /
• pp.127-135
• /
• 1985

The effects of morphological development and environmental temperature on synthesis and accumulation behavior of cell-wall constituents were studied in maize cv. Blizzard and sorghum cv. Sioux and Pioneer 931 at Muenchen Technical University from 1979 to 1981. Various growth stages of maize and sorghum plants were grown on field and phytotron at 4 temperature regimes of 30/25, 25/20, 28/18 and 18/8 degree C and mid-summer sunlight over 13-hour days. The results are summarized as follow: 1. Cell-wall constituents in sorghum and maize plants were shown to have a great synthesis rates at early growth stage from growing point differentiation to final leaf visible. The highest concentration of cell wall contents were found at heading stage with 52-54% and 64-68% of neutral detergence fiber, and 30% and 45% of acid detergence fiber foe maize and sorghum, respectively. 2. The structural carbohydrates, cellulose and hemicellulose, were found as a main components of cell-wall constituents. Cellulose were mainly accumulated in stalks, while hemicellulose were an important cell wall components in leaves and panicle. 3. Synthesis rates of cell-wall constituents and non-strnctural carbohydrates were associated with increasing of temperature. Reserved carbohydrates such as fructosan, mono - and dissaccharose in plant were, however, declined when the temperature exceeded 30 deg C, during the accumulation of cellulose, hemicellulose and lignin were increased continuously. 4. Cell-wall constituents lowered digestibility and net energy accumulation in sorghum and maize plants. In a in vitro and in vivo trial, it was found a negative correlation between digestion dry matter and cell wall constituents, especially cellulose and lignin.

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.241-245
• /
• 1983

PraziquantEI ($Distocide^{\circledR}$), the KcrEan product, was tEstEd for its safety and Efficacy in treatmEnt of Clonorchis sinensiJ infccticn during the period from April to SeptembEr, 1983 in Korea. A total of 55 egg positive cases were selected and treated with the regimen of 25 mg/kg t.i.d. for 1 day (total 75 mg/kg). The follow-up stool examination was done in 47 cases by cellophane thir;k smear and Stoll's egg counting techniques. The 8 uncured cases were treated again with the same regimen. The laboratory tests for blood picture and liver function were done in 27 cases and compared before and after the treatment. The results obtainEd are as follows: 1. After single course treatment, the cure and egg reduction rates were 83.0 and 99.1% respectively. With the second treatment, excellent results of 100% in both rates were obtained. 2. Several kinds of side effects such as dizziness, headache, etc. were complained by 29 cases (61.7 %), however, those were so mild and transient that no special treatment was necessary. 3. No significant change in laboratory findings was recognizable before and after the treatment. From the above results, it is concluded that $Distocide^{\circledR}$ is as effective and safe as $Biltricide^{\circledR}$ and highly recommendable in treatment of C. sinensis infection.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.61-72
• /
• 2001

A barrier liner system is placed at the bottom and side slope in landfill to protect a leaking of leachate that the hydraulic conductivity of this system should be less than It 107cm/sec. In this study, the soil-bentonite mixture for the bottom liner system was evaluated in two point of views : changing characteristics of the hydraulic conductivity according to the different mixing ratio of soil-bentonite with the effect of bentonite swelling and the difference method (A & D type) of compaction on the hydraulic conductivity. As the results, maximum dry density (${\gamma}$$_{dmax}$) of SC group mixture was higher than of CL group mixture. However, the result of optimum moisture contents(OMC) of both groups were the contrary. In case of ${\gamma}$$_{dmax}$ by different compaction method, D type was higher than A. But the OMC were the contrary. The difference of ${\gamma}$$_{dmax}$ according to the Compaction energy, “SC” group mixture W3S higher than the “CL” group. In case of OMC of “CL” group was higher than “SC” group. The effecting of swelling was a little bit different on the two factors. According to the result of compaction test, the use of site soil only could not meet the criteria on hydraulic conductivity, but could find a solution for the mixing ratio of bentonite mixture were satisfied to the standard of barriation. The increased in bentonite mixing ratio and degree of swelling, the values of hydraulic conductivity were decreased. Especially the “CL” group with “D” type compaction measured the lowest value with the same conditions. Also, the bentonite mixing ratio has more influenced on the hydraulic conductivity compare with swelling effect. The “SC” group mixture with “A” typo compaction got a big difference from others. The evaluation of economic for the construction cost on the two cases, the lower bentonite mixing ratio of soil-bentonite mixed soil is more economically because of bentonite cost.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.191-196
• /
• 2011

Purpose: In this study, we evaluated the bond-strength between a few metal ceramic-alloys and veneered-porcelain and found if the bond strength of metal-ceramic alloy with lower gold content than the presently used gold alloy was high enough. Materials and methods: For this study, after plasticizing porcelain only for gold alloy, metal specimen was fabricated using Ni-Cr alloy and gold alloy with different gold content. Three point flexural test were performed to measure their bond-strength. Results: The bonding strength of Group 1 to porcelain was $40.62{\pm}3.32$ MPa, which was the highest (P<.05). In sequence of decreasing value, Group 2 (75%) was $37.47{\pm}1.57$ MPa, Group 3 (52%) $35.85{\pm}1.48$ MPa, Group 4 (51.5%) $35.04{\pm}1.34$ MPa, Group 5 (32%) $33.17{\pm}1.62$ MPa, Group 6 (10%) $30.75{\pm}1.21$ MPa. Bonding strength of Group 3 and Group 4 to porcelain did not show statistically significant difference with comparison to that of Group 5 (Duncan's test, P>.05), while there was a significant difference between that of Group 2, Group 3 and Group 4 and that of Group 6 (Duncan's test, P<.05). The bonding strength between gold alloy and porcelain increased according to the content of gold. In all experimental groups showed higher value than 25 MPa, which is the least value recommended by ISO 9693. Conclusion: In all groups, bonding strength was higher than 25 MPa, which is the least value of ISO9693. Therefore, it is considered that metal gold alloy with low gold content is clinically usable.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.10
• /
• pp.1397-1403
• /
• 2011

Epimedium koreanum Nakai is a wild medicinal plant commonly consumed in South Korea due to its health beneficial effects. In the present study, the antioxidative, antimutagenic and immunological activities of E. koreanum Nakai extracts were investigated for their use in food. The yields of icariin compounds from the ethanol extract as well as the ethyl acetate, butanol, hexane, water, and chloroform fractions of E. koreanum were 27.9, 2.5, 1.7, 1.4, and 1.3 ${\mu}g/g$, respectively. The icariin components (295.5 ${\mu}g/g$) were collected from the ethyl acetate fraction by thin layer chromatography (TLC) and analyzed via high performance liquid chromatography (HPLC). The antioxidant activities of each fraction were as follows: ethyl acetate (49.0 ${\mu}g/mL$), butanol (59.2 ${\mu}g/mL$), hexane (119.8 ${\mu}g/mL$), water (122.0 ${\mu}g/mL$), and chloroform (138.5 ${\mu}g/mL$), based on $RC_{50}$ ${\mu}g/mL$. Icariin, isolated and identified as the main component, showed strong antioxidant activity with a $RC_{50}$ value of 15.3 ${\mu}g/mL$, which was higher than those of ascorbic acid (19.5 ${\mu}g/mL$) and ${\alpha}$-tocopherol (18.2 ${\mu}g/mL$). In an Ames test, none of the fractions produced mutagenic effects on Salmonella Typhimurium TA98 and TA100. In an immunomodulating activity test, the effects of E. koreanum Nakai on B cells (Rhamos) and T cells (Jurkat) were investigated. These results show that the growth and viability of B and T cells were increased by isolated icariin components for 1.27 and 1.28 fold, respectively. These results also provide preliminary data for the development of E. koreanum Nakai as an edible food material.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.

• Journal of Bio-Environment Control
• /
• v.16 no.3
• /
• pp.210-216
• /
• 2007

A study was conducted to find mechanism and spray characteristics of a mini-sprinkler with downward spray to develop a new design type to be able to prevent drop water. The experiments were executed in a plastic greenhouse to minimize the effect of the wind. Data was collected at five different operation pressures and at 4 different raiser heights. Spray characteristics of the sprinkler such as effective radius, effective area, mean application depth, absolute maximum application depth, effective maximum application depth and coefficient of variation were determined. In order to analyze the mechanism and packing supporter of sprinkler, the numerical simulation using ABAQUS was performed. The optimum pressure for preventing drop water was determined.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.173-185
• /
• 2018

Effects of three different types of dispersions and flow improving additives composed with fatty acid esters, fatty acid metal salts and amide compound on the vulcanization and the mechanical properties properties of rubber compounds of EPDM and carbon black as fillers. were investigated using Mooney viscometer, moving die rheometer, hardness tester, and universal test machine. The aging characteristics of vulcanized EPDM compounds were also investigated. The Mooney viscosity measured at $125^{\circ}C$ showed a tendency to decrease in the order of amide type> metal salt type > ester type additive. Scorch time showed little or no difference with the addition of ester or metal salt type additives, but the amide type additive shortened a scorch time more than one minute. Rheological measurement data obtained at $160^{\circ}C$ showed that the vulcanization time was faster for metal salt type and amide type additive systems. Delta torque values of EPDM compound increased with metal salt type and amide type additives, but slightly decreased with ester type additive. The tensile strength of the EPDM compound was greatly improved when an ester type additive was added, but the amide type or metal salt type additive had no significant effect. The elongation was significantly improved for metal salt type additive, while the rest were not significantly affected. The tear strength of the EPDM compounds increased with the addition of all kinds of additives, and it increased remarkably in the case of metal salt type additive. Hardness of the EPDM compounds was nearly same value regardless of additive types. The thermal aging of the EPDM blend at $100^{\circ}C$ for 24 h showed little change in the case of metal salt type or amide type additive, but the elongation tends to decrease by 10-20% for all EPDM compounds containing additives.