• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.119-126
• /
• 2017

Purpose: The aim of the present study was to compare clinical antiplaque and antigingivitis effect between Light Emitting Diode (LED) electronic toothbrush and electronic toothbrush without LED for gingivitis and mild periodontitis patients. Materials and Methods: 30 patients included in this study. 15 patients in experimental group used LED electronic tooth brush which has red and white LED within its head, and other 15 patients in control group used same product which specially modified that function without LED. Clinical parameters ($L{\ddot{o}}e-Silness$ gingival index (GI), Quigley-Hein plaque index (PI)) were measured at the baseline, 2 weeks and 4 weeks later. Wilcoxon signed rank test and Mann-Whitney test were used for statistical analysis. Results: Compare of GI change between experimental and control group with time, both groups showed that reduced GI, but lower GI values detected at 2 weeks and 4 weeks later in experimental group than control group. And lower PI values detected at 4 weeks later in experimental group than control group, but not statistically significant. Conclusion: Based on these results and within the limits of this study, the electronic toothbrush with LED could reducing gingivitis in a short period and infer that decreasing plaque accumulation in a long period.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.10
• /
• pp.19-27
• /
• 2013

Tatsuoka and Shibuya (1991) suggest a new single formulation applicable not only to a wide range of geo-materials from soft clay to soft rock, but also to a wide range of strain levels from $10^{-6}$ to $10^{-2}$. We have carried out the plain strain compression test employing 7 kinds of research standard sand specimens and 2 kinds of glass beads, which have been used at world-renowned research institutes. With the result applied to Tatsuoka and Shibuya's newly suggested formulation, we studied a trend of parameters. In conclusion, as the value of confining pressure increases, the value of $C_1(X={\infty})$ becomes greater but there are hardly any changes in the value of $C_2(X={\infty})$. The value of $C_1(X={\infty})$ also becomes greater as the ${\delta}$ value increases, regardless of sand types. However, the values of $C_2(X={\infty})$ and $C_2$(X=Xe) do not show any significant changes when there are changes in the value of ${\delta}$, while the values of ${\alpha}$ and ${\beta}$ tend to decrease as the ${\delta}$ value decreases.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.1
• /
• pp.93-101
• /
• 1987

Residual stresses have remained around welding areas of a steel structure member after welding operation. The major causes to occur these residual stresses are the local heat due to a welding, the heat stresses due to a irregular and rapid cooling condition, the material and rigidity of a steel structure. Ultimatly, these residual stresses have been known to decrease a brittle fracture strength, a fatigue strength, a buckling strength, dynamic properties, and the corrosion resistance of the material. This paper deals with the residual stresses on a steel structure member through experimental studies. SWS 58 plates were welded by the method of X-groove type. These plates were layed on the heat treatment at four different temperatures; $350^{\circ}C$, $500^{\circ}C$, $650^{\circ}C$ and $800^{\circ}C$. The resulting residual Stresses were measured by hole drilling method, and the followings were obtained. The residual stresses on the vicinity of a welding point were relieved most effectively at the temperature of $650^{\circ}C$, and these stresses relieved completly when the ratio of a hole diamerter to a hole depth became unity. Hardness test shows that the higher value of hardness at the heat affected zone dropped to belower as the temperature went up from $350^{\circ}C$ to $800^{\circ}C$. The Welding input heats have not influenced the magnitude of residual stresses at the input heat range between above and below one forth than standard.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.317-325
• /
• 2012

In this study, to evaluate the shrinkage behavior of ultra high performance fiber reinforced concrete (UHPFRC) under restrained condition, restrained shrinkage test was performed according to ring-test mostly used at home and abroad. Ring-test was performed with the various thicknesses and radii of inner steel ring to give different degree of restraint. Free shrinkage and tensile tests were carried out simultaneously to estimate the degree of restraint, stress relaxation, and shrinkage cracking potential. Test results indicated that the average steel strain and residual tensile stress were reduced as the thicker inner steel ring was used, whereas degree of restraint was increased. The steel strain, residual tensile stress and degree of restraint were hardly affected by the size of radius of inner ring. In the case of all ring specimens, shrinkage crack did not occur because the residual tensile stress was lower than the tensile strength. About 39~65% of the elastic shrinkage stress was relaxed by the sustained interface pressure, and the maximum relaxed stress was increased as the thicker inner ring was applied. Finally, the degree of restraint with age was predicted by performing non-linear regression analysis, and it was in good agreement with the test results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.176-180
• /
• 2000

The higher sugar and lower starch in super sweet corn may be due to modified endosperm genes sh, bt series, but its seeds have major limiting factors causing low germination and low seedling vigor, This study was conducted to determine what measurable kernel characteristics during the grain tiling period might be more useful as a guide to optimize harvest date for good seed quality in hybrid super sweet corn production. Artificial crossing in super sweet corn hybrid (Chodangok 1) was made on the same day, and ears were harvested from 18 days to 53 days after pollination at weekly intervals. Kernel weight, moisture content, hardness, endosperm rate, seedling height and storage nutrients such as sugars, protein, starch, and germination rate were measured for the kernels at each harvest. Super sweet corn hybrid, Chodangok 1 presented satisfactory germination rate above 70% when harvested on 39 to 46 days after pollination. Its storage nutrients at that time were 23.7-24.2% in starch content 5.5-5.9% in total sugars, 38.9-46.6% in kernel moisture, and 62.7-64.2% in endosperm rate. Germination rate was extremely high when harvested on 39 days after pollination. The black layer of Chodangok 1 could not be used as an indicator for seed harvest. These results suggested that optimum harvest date seems to be 39 days, and kernel moisture and starch content could be used as indications of kernel maturity in deciding when to harvest fer good seed quality in super sweet corn.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.388-395
• /
• 2015

Somatic embryogenesis is as an excellent technology for potential use in plant mass production, germplasm conservation, or genetic engineering. We examined the effect of cold storage using 3 embryogenic callus lines with different levels of embryogenesis competence derived from immature zygotic embryo cultures of Kalopanax setemlobus. Somatic embryo induction, germination and plant conversion were evaluated after 1, 3 and 6 months storage at $4^{\circ}C$ in the dark. Most cold-stored embryogenic calli formed somatic embryos normally even after 6 months; however, the induction rate was gradually decreased by increasing the storage period. The most competent line tended to show a slight decline in somatic embryo induction rate, as compared with other lines after cold storage. In general, cold storage resulted in reduced somatic embryo germination and plant regeneration, although 93% somatic embryo germination and 91% plant conversion were achieved regardless of the storage period. Cold storage led to cell browning and degradation. Additionally, the cell structures were confirmed by the aceto-carmine and evans blue dye evaluation. Collectively, our results showed that embryogenic callus of K. septemlobus could be preserved at $4^{\circ}C$ without subculture for 6 months, and suggested the need for storage of relatively more competent embryogenic calli lines to support somatic embryo induction.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.147-153
• /
• 2010

Bio-integration of cartilage grafts with subchondral bone is a significant clinical challenge. To date, the use of demineralized bone matrix (DBM) has been one of the most effective strategies for bone cell proliferation in vivo. Here, we investigated whether coculture of chondrocytes and DBM could serve as a single-platform system containing all the essential elements for purposive bone and cartilage induction. The aim of this study was to evaluate and compare the phenotype and proliferation of bovine chondrocytes cocultured with DBM in two different culture systems, pellet and alginate bead culture. In alginate bead culture, we observed an increase in chondrocyte number and formation of cell clusters. Typical chondrocytic phenotype was maintained for entire eight weeks. Histological analysis showed that chondrocytes maintained a typical round, plump morphology and there was a gradual increase in lacunae. Both coculture systems yielded an expanded cell population as compared to the controls (chondrocytes alone). The production of glycosaminoglycans was also increased in the coculture systems as compared to controls.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.1
• /
• pp.22-32
• /
• 2011

The present study examined the effects of the complexity of the 3D models on the results of acoustic simulation which is the predominant tool of the acoustical design of buildings. Also, the effects of the 3D model on the auralized sounds were investigated. In order to carry out the study, four 3D models with different levels of complexity were introduced for a real auditorium which have different numbers of surfaces in the persuit of the guidance of odeon room acoustic software. The set-up of models was also based on the level of transition order of the program. And the acoustic experiments were performed measuring room acoustic parameters including SPL, RT, C80, D50. Acoustic computer simulations were performed using four different models. Then, the results of the computer modeling were compared with the measured acoustical parameters. In addition, sound sources were recorded in the field and auralized sounds were made in convolution with the impulse source made from acoustic modeling. Then, subjective tests were undertaken using auralized sounds. As the results, it was found that the result of the acoustic simulation were closer to the real room acoustic properties when 3D model was more particularly made. For the subjective test, the listening materials were acknowledged as similar with the real sound source when more complex 3D model was used. Then, it could be concluded that the complexity of the 3D model affects the results of the acoustic modeling as well as subjective tests.

• Fire Science and Engineering
• /
• v.13 no.4
• /
• pp.38-55
• /
• 1999

In order practically to use fire-defective glazing materials for the compartment wall where a fire-protection rating is mandated, there have been many trials internationally, This research focuses on a feasibility that, if certain water film covered all surface of glass, the glazing system can endure without breaking out under the compartment fire. First of all, a water film spray system was specially designed to wet the entire surface of the glass and also to have tiny small amount of water rebounded from the surface after emitted from nozzles. After this system has proven to have perfect performance, small-scale tests were done to find out if the water film covered glazing system react to the high temperature curve in a small furnace room. Finally, on basis of the obtained data, full-scale experiments were done so that water-film covered glazing system can pass the Korean Standard (KS) test for fire resistance, KS F2257.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.16-21
• /
• 2008

This study was carried out to obtain the basic data for the mycelial growth conditions of cauliflower mushroom, Sparassis crispa. Twenty-one isolates were collected from domestic and abroad. The optimal temperature and pH for the mycelial growth of these isolates were $23^{\circ}C$ and pH 6.0, respectively. The mycelial growth was the best in the HBA medium, but very poor in the Lilly medium. However no mycelial growth in the CzapekDox medium. The utilization of carbon source was the best with fructose, and that of nitrogen source was the best with glutamine when compared to other tested sources. The selected isolate ASI150010 produced the highest mycelial weight in liquid culture containing soybean mill ($15\;g/{\ell}$) and potato ($200\;g/{\ell}$) extract. And uncleaned rice, wheat and barley were found to be good substrates for the mycelial growth S. crispa.