• Composites Research
• /
• v.37 no.3
• /
• pp.186-189
• /
• 2024

This study compared and evaluated the mechanical properties of carbon fiber reinforced thermoplastic polymer (CFRTP) mixed with nanofillers. After mixing various nanofillers such as Multi-wall carbon nanotube (MWCNT), Silicon oxide, Core shell rubber, and Aramid nanofiber with Polyamide 6 (PA6) resin, this is used as a matrix to create a carbon fiber reinforced composite material (CFRP) was manufactured and its physical properties were measured. Depending on the type and mixing ratio of nanofiller, tensile strength, inter-laminar shear strength (ILSS), and Izod impact strength were measured. In terms of tensile strength and impact strength, the highest values were obtained when mixing core shell rubber, however the ILSS was optimal when mixing less than 1 wt.% of silicon oxide.

• Composites Research
• /
• v.24 no.4
• /
• pp.1-4
• /
• 2011

In this work, we successfully fabricated graphene oxide (GO) and GO-based PMMA composite fiber and nylon films. Dynamic mechanical and tensile properties of PMMA-GO composite fiber showed that GO is efficient reinforcement for polymer matrices. However, Nylon 6,6-GO composite films showed low reinforcement efficiency in terms of dynamic mechanical and tensile properties due to the colloid instability of GO in formic acid at a low pH level.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.244-244
• /
• 2011

핵융합장치 내부의 플라즈마 대면재료는 고온의 플라즈마와 직접 대면하므로 수 십 MW/$m^2$에 이르는 큰 열부하에 따른 재료의 물성변화, 즉 고온환경에 따른 재료의 팽윤, 크리프(creep) 변형 그리고 금속이 가역성이나 연성을 잃는 취화현상 등이 중요한 연구주제이다. 고열부하의 인가를 통한 핵융합대면재료의 물성실험은 현재 국내에서는 탄소히터, 열플라즈마 등을 이용하여 이루어지고 있으며 국외에서는 짧은 시간에 큰 열부하를 인가할 수 있는 고출력 전자빔장치가 주요한 열부하실험장치로 활용되고 있다. 본 연구에서는 기초적인 실험이 가능한 고열부하용 전자빔조사장치를 제작하여 대표적인 플라즈마 대면재료인 텅스텐에 60 keV, 30 mA의 전자빔을 조사한 후 고열부하에 따른 텅스텐의 물성변화를 측정하였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.193-196
• /
• 2002

Core-shell 고분자는 고분자의 블렌딩과 공중합의 물성과는 다르게 동일한 입자내에서 2가지 이상의 상반된 특성을 동시에 나타내는 재료이다. 이것은 재료의 특성에서 요구되는 물성의 다양화, 자원의 고도이용, 재료의 고부가 가치화 등 여러 가지 관점으로부터 주목을 받고 있다. 이들 라택스는 피혁, 각종 코팅제, 부직포, 페인트, 접착제 등의 여러 산업분야에 응용이 가능하며, 특히 무독성이므로 응용분야는 점점 늘어나고 있으며 최근에는 생물의학과 극소전자공학 등에 응용할 수 있는 환경친화적인 고급소재이다.(중략)

• Electrical & Electronic Materials
• /
• v.17 no.4
• /
• pp.5-15
• /
• 2004

나노기술은 분자나 원자 단위에서 물성을 규명하고 조작하여 기존 재료의 물성개선은 물론 신재료 및 신소자를 개발할 수 있는 기술로서 활용도가 넓고 잠재가능성이 커서 선진국에서는 기술선점을 위해 정부차원에서 대규모 투자를 하고 있다. 특히 나노기술과 바이오기술의 접목인 나노바이오기술은 생명현상이 주로 나노스케일에서 일어나기 때문에 두 기술의 융합이 용이하기 때문에 많은 응용분야에 대한 연구가 이루어지고 있다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.42-48
• /
• 2017

When concrete structures expose to fire, the structures were damaged accompanied with degradation of material properties of concrete. In order to determine the reuse of fire-damaged concrete structures, it is needed a careful determination considering conditions of fire damage, such as exposure temperature and exposure time, and also potential to restore fire damage. This study investigates on the evaluation of residual material properties of fire-damaged concrete under different post-fire curing regimes. An experimental study was performed on concrete samples to measure the dynamic elastic modulus by the impact resonance vibration method. Upon the experimental results, the evidence of restoration of material properties was confirmed on specific post-fire curing regimes, higher humidity conditions. Additionally, a correlation analysis was performed on the dynamic elastic modulus with the tensile strength for identifying the effects of post-fire curing regimes on both material properties of fire-damaged concrete.

• Composites Research
• /
• v.28 no.3
• /
• pp.130-135
• /
• 2015

This study investigates the property of graphene filled polymer nanocomposites in LEO(Low Earth orbit) environment conditions. In order to improve compatibility with polymer matrices and resistance of carbon material against AO(Atomic oxygen) attack, silanization of graphene oxide with organosilane was carried out. The corresponding moieties were characterized through X-ray photoelectron spectroscopy (XPS). Graphene oxide filled nanocomposites were prepared using solution based processing methods. The sets of specimen series were tested in an accelerated LEO simulated space environment facility. Graphene oxide and silane treated graphene oxide reinforced nanocomposites were compared with neat epoxy. The comparison revealed that the silane treated graphene filled polymer composite shows inherent resistance against atomic oxygen attack while the lack of silane treatment resulted in a reduction in performance.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.221-225
• /
• 2005

성층권 비행선 기낭용 막재료를 개발하였다. 성층권 비행선을 구현하기 위한 초경량/고강도의 막재료를 설계 개발하였다. 요구조건을 만족시키기 위하여 벡트란, 테들라 등의 최신 고분자 화합물을 적층한 막재를 개발하였다. 개발된 막재료에 대한 유한요소 미세구조 모델링을 수행하고, 물성치를 예측하였다. 막재료에 대한 물성시험을 수행하였다. 단위 시편에 대한 강도-강성 시험을 수행하였으며, 이를 유한요소 예측치와 비교하였다.

• Composites Research
• /
• v.30 no.3
• /
• pp.169-174
• /
• 2017

Demand of glass fiber reinforced composites (GFRC) increased with developing aircraft and defense industries using resin transfer molding (RTM) process to produce complex product. In this research, wetting, interfacial, and mechanical properties were evaluated with different Cross-linking Density by Molecular Weight of Hardener. Epoxy resin as matrices was used bisphenol-A type and amine-type hardeners with different molecular weight. Specimens were manufactured via RTM and wetting property of resin and glass fiber (GF) mat was evaluated to viscosity of epoxy and injection time of epoxy matrix. Mechanical property of GFRC was determined via flexural strength whereas interfacial properties were determined by interlaminar shear strength (ILSS) and interfacial shear strength (IFSS). The difference in mechanical property depends upon the fiber weight fraction (wt %) of GFRC by RTM as well as the different Molecular Weight of Hardener.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.273-278
• /
• 2019

In this study, a new simple method for the estimation of hyperelastic material properties by indentation tests is proposed. Among hyperelastic material models, the Yeoh model with three material properties ($C_{10}$, $C_{20}$, $C_{30}$) is adopted to describe the strain energy density in terms of strain invariants. Finite element simulations of the spherical indentation of hyperelastic materials of the Yeoh model with different material properties are performed to establish a database of indentation force-displacement curves. The indentation force-displacement curves are fitted by cubic polynomials, which are approximated as a product of third-order polynomials of ($C_{10}$, $C_{20}$, $C_{30}$). A regression analysis is conducted to determine the coefficients of the equations for the indentation force-displacement curve approximations. A regression equation is used to estimate the hyperelastic material properties. The present method is verified by comparing the estimated material properties with true values.