• Journal of Conservation Science
• /
• v.28 no.3
• /
• pp.193-204
• /
• 2012

This research aims to examination the material characteristics changes of the ancient clay depending to firing temperature and to verify the firing temperature of the Joseon potteries from the Yongam site in Ssangyongdong of Cheonan, Korea. To this study, we conducted a firing experiments using the ancient clay that was verified raw material of the Joseon potteries from the study area in the temperature range from 500 to $1,200^{\circ}C$. The yellowish tint, the reddish tint and the specific gravity of firing samples increase according to firing temperature rise. But the absorption ratio and the porosity decreased under same firing temperature range. The soft potteries from the Yongam site has similar material characteristics with the fired samples at 800 to $950^{\circ}C$. And the hard potteries from the Yongam site bears the same relation to the fired samples at about $1,100^{\circ}C$. This result is considerably signification for the interpretation of firing temperature. The geochemical characteristics of the original clay according to the firing experiments, on the other hand, is not affected of temperature in this study.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.738-747
• /
• 2021

This study attempted to investigate the metallurgical characteristic through material scientific analysis of hammer scale produced as a direct smelting method restoration experiment for each raw material of iron. To this end, four hammer scale groups were set up, respectively, by experimenting with Gyeongju-Gampo Iron sand and Yangyang Iron ore. For the analysis, principal component analysis, compound analysis, microstructure observation, and chemical composition were confirmed. As a result of principal component analysis, as forging and refining progressed, the content of Fe increased and the content of non-metallic objects decreased. As a result of compound analysis, iron oxide-based compounds were identified. As a result of confirming microstructure and chemical composition, Wüstite and Fayalite were observed overall, and agglomerated Wüstite were observed in some. Magnetite on shape of polygon and pillar was observed. In addition, it was confirmed that internal defects, impurities, and non-metallic interventions gradually decreased. In the future, it is necessary to investigate the metallurgical characteristic through material scientific analysis of hammer scale produced through restoration experiments using various raw material of iron, and compare them with those excavated from Iron manufacture ruins.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.563-567
• /
• 2015

우리나라 하천관리의 패러다임은 1990년대 이후 기존의 치수 및 이수능력을 고려함과 동시에 하천환경의 보전 및 복원을 새로운 목표로 설정한 자연친화적 방식으로 변화되었다. 하천법령 및 제도적 측면에서도 수자원 장기종합계획 및 유역 종합 치수계획은 하천의 환경보전 및 다목적 이용계획을 포함하도록 규정하고 있으며, 국내 하천법에 따르면 하천기본계획 수립 또한 자연친화적 하천조성 및 이와 관련된 보전지구 지정 등을 포함하도록 규정하고 있다. 하천설계기준, 자연 친화적 하천관리에 관한 통합지침, 또는 수자원 장기종합계획에서 적용하고 있는 하천환경조사 및 평가지표는 서로 다를 뿐만 아니라 과학적인 근거가 명확하지 않는 등 국가차원의 표준화가 이루어지지 못한 상태라 할 수 있다. 1990년대 이후 미국, 독일, 영국, 호주 등 선진국들은 하천환경 복원사업의 추진과정에서 복원사업의 타당성 제고 및 성공적인 사업수행을 위하여 그들 국가의 하천특성에 적합한 하천환경 평가 체계를 구축한 바 있으며, 이들 평가체계는 새로운 과학적 지식과 기술의 축적에 힘입어 지속적으로 발전되고 있다. Fujita의 유형화(Segment 분류)법에 의하면, 하천구간(Segment)은 하상경사, 하상재료, 식생, 생태 등이 통계적으로 동질인 하천 구간으로서, 하도 특성과 하천생태계 공간을 구분하는 단위이다. 자연하천에서 동일한 경사를 갖는 하천구간은 하상재료, 소류력, 저수로 폭, 수심 등이 대체로 동일한 값을 나타내고 있으며, 하도 특성을 지배하는 주요 인자로 각 하천의 평균 연최대유량, 하상재료의 대표입경, 하상경사 등을 설정하고 있다. 본 연구에서는 하천구간을 유형화하는 기준을 하상경사로 적용하여 평가단위를 분류하였으며, 평가체계는 미국의 USEPA를 한국형 하천환경에 맞도록 수정보완 하였다. 특히 미국의 USEPA의 지표 중 하안영역의 식생피복, 하반림 등은 생물분야 식생영역과 상충되어 제외하고 우리나라 특성에 적합한 하천횡단형상, 하천횡단 구조물 등의 평가기준을 재정립하여 내성천에 평가적용 분석하였다. 하천환경의 수리 및 하도 특성 평가기준 개발에 따라 평가체계의 개념적 틀을 토대로 통합적이고 표준화된 한국형 하천평가기준 개발을 위한 방법론을 정립하고, 나아가 하천환경의 지속가능성을 전제로 한 하천복원사업의 장 단기적 성공 여부를 평가할 수 있는 실무지침의 과학적 근거를 제시하고자 한다.

• Journal of Conservation Science
• /
• v.28 no.1
• /
• pp.7-20
• /
• 2012

This study was to identify the material characteristics and provenance of the Joseon (the 15th to 17th century) potteries from Ssangyongdong Yongam site in Cheonan. The pottery samples of the kilns and the workshops (habitation) from the study area have grey or red color with similar matrix but various shapes and different hardness, according to firing temperature. All of the pottery and the workshop soils were very similar patterns with characteristics of occurrences, mineralogy and geochemical evolution trend. But soils from around the site does not correspond with them. So the workshop soil that the fine clay is raw clay for making pottery in Yongam site. Firing temperature of soft-type potteries were presumed to be formed around $900^{\circ}C$ based on phase transition of clay minerals and mica. Hard-type pottery, mullite was detected and plagioclase was not detected by X-ray diffraction analysis, which means that potteries had experienced firing between 1,000 to $1,100^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.133-133
• /
• 2019

하천의 하상재료는 전반적인 하천 계획 및 정비 등의 기초자료이다. 특히 하천의 하상재료 조사는 하천의 조도계수 산정, 하천의 유사이송 특성 분석 및 하천 서식처 등의 하천환경 조사를 위하여 수행한다. 지금까지의 하천 하상재료 조사는 사람이 직접 하상토를 채취하거나 사진을 이용하여 대략적인 스케치를 통해 진행하다보니 자료의 품질에 대한 신뢰도가 떨어지고, 사람이 직접조사를 해야 하기 때문에 비용이 많이 필요하여 몇 개 지점을 대상으로 하상재료 조사를 수행해야 하는 등의 한계를 가지고 있다. 따라서 하천 환경 평가를 위한 하상재료 조사를 위해서는 좀 더 체계적이고 과학적인 기술 개발이 요구된다. 특히 물속의 하천 하상재료를 조사하는 것은 육안 또는 카메라를 이용한 조사로는 어려움이 많기 때문에 하천 전체의 공간적인 하상재료 조사를 위해서는 새로운 기술이 필요하다. 이에 본 연구에서는 보다 정확한 조도계수 산정을 위해 초분광 영상을 이용하여 하상재료를 분류하고, 이를 이용하여 하천 환경 평가를 할 수 있는 하상재료 분포도를 만들기 위한 하상재료의 분광특성 분석 연구를 수행하였다. 초분광 영상의 분광특성은 수백개의 밴드가 연속적으로 구성된 정보를 말하며, 영상 내 모든 화소의 파장정보를 포함하는 데이터 큐브형식으로 구성된다. 물체의 파장정보는 분광기나 초분광 영상 촬영 장치를 통해 수집할 수 있으며 파장정보는 파장과 이에 해당하는 영역의 반사도를 측정하여 하상재료의 분광반사특성으로 확인할 수 있다. 따라서 본 연구에서는 하천의 다양한 하상재료들만의 고유 분광반사특성을 분석하여 하상재료별 분광 라이브러리를 구축하고자 한다. 또한 이와 같이 하상재료별 분광 라이브러리를 구축한 결과를 활용하여 무인기 기반의 초분광 영상을 활용한 하천 하상재료 분류 기술을 개발하고자 한다. 이를 위해 본 연구에서는 하상재료별 분광라이브러리를 구축하였고, 실제 하천에서 무인기 초분광 영상에 활용한 결과 수체가 존재하는 영역에서도 초분광 영상을 활용하여 하상재료의 분류가 가능한 것을 확인하였다.

• Conservation Science in Museum
• /
• v.13
• /
• pp.71-80
• /
• 2012

So-hwan earring(small hoop earing) is orbicular earring that have only main hoop. In this study, So-hwan earring from Baekje tombs are analyzed scientifically and those is attempted to find the correlation between scientific results and historical constituent. Six earrings were excavated from Habjung-ri sites in Buyeo and formative features and material characteristics of them were analyzed by microscope and XRF. As a results, various toreutics about producing gold silver alloy, pressure welding and amalgam plating that existed in Baekje from Ungjin period to Sabi period.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.171-185
• /
• 2013

The purpose of this study were to interpret making characteristics and clay sources for Proto-Three Kingdoms period potteries which were excavated from Bakjimeure site in Tangjeong, Asan, Korea, on the basis of shape types. The pottery samples of the studied included deep bowl pottery, cylinder shaped pottery, duck shaped pottery and rounded based jar with short neck. And the last jar was dominant among them. This is supported in nearby Yongduri Jinter site, Galmaeri site and Baekseokdong site. They vary in terms of color of clay, absorption ratio and mineral classification. Based on the fact that their absorption ratio range was 4.50 to 25.19% and firing temperature range was 850 to $1,150^{\circ}C$, they were thought to be widely used. The equivalence of cylinder shaped pottery, duck shaped pottery and deep bowl pottery was high in terms of material characteristics and their firing temperature range was 850 to $950^{\circ}C$. However, the deep bowl pottery, compared to other pottery shapes, contained great amount of coarse grained quartz and feldspar, and was different from others in terms of function. For soil sample collected from relative plains (area 3) in the southernmost part of the site, their mineralogical and geochemical characteristics were the most similar to those of the potteries excavated from the Bakjimeure site and even most of the potteries collected from different sites.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.329-334
• /
• 2014

A scientific analysis of ancient textiles provides significant data to understand weaving techniques and culture of textiles in each region and charateristics of materials used at that time. In addition, species identification of waterlogged wooden objects is a scientific analysis method that allow us to verify information of relation of foreign species trade and exchange, of preferable species through kinds of wooden products, and of forest environment as well as method setting of conservation. As a result of a species analysis about historical textiles and a wooden comb in a bronze bowl that were excavated from Hapgang-ri, Dong-Myun, Yungi-gun, Chungcheongnam-do, Textile1 and Textile3 are identified as Urticacese Boehmeri nivea ; ramie, Textie2 is identified as Malvaceae Gossypium herbaceum, and a wooden comb is identified as Betulaceae Betula spp. It is expected that this result will help to make further comparative studies, identifying species of textiles and trees of ancient times.

• Journal of Conservation Science
• /
• v.23
• /
• pp.53-65
• /
• 2008

This research investigated and analyzed the structure and material feature of the wall behind the Buddha of main temple in An-dong Bongjeonsa through applying the natural scientific method, in order to closely examine its production technique. As a result of the research, the structural and material feature of the wall has been clarified and its production technique applied to the structure has been understood in a comprehensive sense. The target sample basically adopted the two-layer wall system, which showed a symmetric structure to the center made with the wooden material, and is estimated to follow the structural tendency of a general wall which is organized with the first layer, the midterm layer, and the painting wall layer. Each layer formed by the production procedure showed difference in the material and production method according to its characteristics and roles. And it was identified that, in general, the higher a layer lies, the finer grains it has. Combination of the main materials and the additives, used for the wall forming, was presumed to contribute to improving its durability and conservativeness. Also interaction between the materials generating the conservativeness and the producer's technical effect seemed to fortify solidity of the wall.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.689-700
• /
• 2019

This study aimed to analyze the nature and characteristics of the preserved state, materials, and colored pigments of a Buddhist painting of Eunhaesa temple(gwaebultaeng), which is Treasure No. 1270 of Korea, through scientific investigation and analysis. Based on the historical background of the subject, the study investigated the aspects of conservation and analyzed the material characteristics of each pigment in the painting. Results indicate that various colors were created using inorganic pigments such as white lead, minium, cinnabar, orpiment, gold, atacamite, malachite, and smalt and using organic pigments such as black and indigo. The Eunhaesa painting used "cho" as a material for wallpaper, which was unusual during the Joseon period. In addition, a white layer was formed using various white pigments, which was also rare during this period.