• Archives of design research
• /
• v.14 no.2
• /
• pp.7-14
• /
• 2001

Facing the 21th century, the cultural era, a lot of people show much more concern on cultural products than before. These cultural products can be regarded as our national countenance because they might contain the national tradition and spirit. So, it is quite obvious that the image of a product will be directly related to the national image. The current problems of developing cultural products in Korea are underdeveloped product design and technique, and widespread of poor quality products. Fist of all, it needs to develop competitive designs by reflecting cultural aspects in each product, based on the specialized research and information on our culture. And it is important to invest in developing materials and skills for mass production and the improvement that can excel the past. Also, there are needs to reform the sales structure to connect producers and consumers directly, not through the wholesalers who cause the price rising. Finally, museums as well as government should cope with this cultural competitive era actively by giving the continuous cultural education and inducing the participation from citizens.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.586-592
• /
• 2009

The preparation of structures with nanosized arrays allows mimicking many different morphologies that exist in nature. In addition, polymer is considered as a material that can be easily applicable to the fabrication of nanostructures and can effectively exhibit nanosize effects since material, synthesis and processing cost is low, and many of polymer structures are well studied. Porous alumina template prepared by anodization of aluminum among nanofabrication methods is the one of promising routes that cost-effectively provides very regularly arrayed nanostructures. In this review, we describe the fabrication of the nanotemplate and template-based polymer nanostructures and their applications.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.89-89
• /
• 2001

종이는 목재섬유와 물의 현탁액을 스크련을 통해 균일하게 분산시킨 판상섬유 제품 으로서 가격이 저렴하고, 열, 전기절연성, 필터기능, 난연성 및 폐기성이 우수하여 다양한 분 야에서 활용되고 있다. 특히 최근에는 종이의 고부가가치화, 차별화를 위하여 내열성, 전기 절연성, 내수성, 기계적 특성, 내약품성, 생체적응성을 지닌 다양한 기능지가 개발되어 식품, 전기, 전자, 건축, 화학, 의료 관련 산업에 있어서 주요 재료로 이용되고 있다. 특히 전기, 전 자산업 발전과 더불어 전기절연성이 우수한 종이의 역할과 수요는 크게 증대되고 있으며 산 업발전의 핵심적인 제품으로서 자리매김을 하고 있다. 하지만 국내의 경우 전기절연지와 관 련된 제품 및 생산기술 부족으로 전량을 수입에 의존하고 있는 실정이며, 그 수입량은 앞으 로 전기 및 전자 산업의 발전으로 인해 더욱 증가할 것으로 예상된다. 이러한 수입의존성을 극복하기 위해서는 전기절연지와 관련된 제품개발 및 생산기술에 관한 연구가 시급히 요청 되고 있다. 이러한 기술의 국산화는 수입 대체 효과 뿐만 아니라 관련 산업의 발전에도 기 여할 수 있을 것으로 예상되며 수출산업으로 성장할 수 있을 것으로 예상된다. 종이의 전기적 성질은 유전상수, 유전손실율과 같은 유전적 특성과 전기저항, 절연 파괴강도의 기계적 특성으로 구분할 수 있다. 종이의 전기적 성질 가운데 유전율은 전기장 에 대한 종이의 물리화학적인 반응으로 일반적으로 종이의 밀도와 종이를 구성하는 성분의 쌍극자 모멘트에 비례하며 온도에 따라서도 변화한다. 일반적으로 온도가 상승하면 열에너 지를 얻게된 쌍극자가 전기장에 배열됨으로써 유전율이 상승하지만 온도가 유리전이점 이상 으로 높아질 경우 열적 교란에 의해서 분극 능력이 감소하게 되어 유전완화 현상이 나타난 다. 전기절연지로 사용될 종이의 절연특성을 이해하기 위해서는 사용환경에 따른 유전적 특 성 및 tan$\delta$에 관한 연구가 펼요하다. 본 연구에서는 종이의 유전특성을 개선하기 위해서 펼름형성능력이 우수한 polyvinyl alcoholCPV A)과 aery lonitrile을 이용하여 시아노에틸화한 P PYA의 표면처리에 따른 종이의 유전적 특성의 변화를 검토하였다. 그 결과 PYA에 도입된 시아노에틸기에 의해 유전율을 증가시킬 수 있음을 확인하였다. 또 본 연구에 적용된 시험 범위에서는 온도상승에 따라 유전율이 상승하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.86-86
• /
• 2018

볼트, 너트 등의 파스너는 건축 재료나 기계부품을 고정하는 데 사용하는 기계요소로, 건축, 철도, 조선 등 전 산업분야에 걸쳐 사용되고 있다. 그 중 스테인리스 소재의 볼트, 너트는 뛰어난 내식성과 저렴한 가격으로 널리 사용되고 있는데, 소재의 특성 및 작업현장의 상황, 온도의 변화 등의 원인에 의해 고착현상(galling)이 발생한다. 고착현상이란 성분 혹은 표면경도가 비슷한 금속의 나사산을 조이는 과정에서 발생하는 압력의 증가 및 마찰력에 의해 냉간 용접(cold welding)이 일어나는 것으로 나사산의 표면이 눌어붙게 된다. 이러한 고착현상은 스테인리스 소재에서 많이 발생하는데, 한번 발생한 후에는 비파괴 해소가 불가능한 상태가 되어 경제적 손실을 야기한다. 이러한 고착현상의 해소를 위해 본 연구에서는 주석과 알루미늄을 사용한 새로운 열 확산 코팅 기술을 개발하고 이를 304 스테인리스강에 적용하여 열처리 온도에 따른 특성변화를 확인하였다. 열 확산 코팅을 위해 팩 세멘테이션 방법을 이용하여 아르곤 분위기 하에서 열처리 하였고, 온도는 $200{\sim}250^{\circ}C$에서 코팅을 수행하였다. 이에 따른 코팅 전과 후의 표면 및 단면 분석을 통해 성공적으로 코팅층이 형성됨을 확인하였고, 온도가 증가함에 따라 코팅성분의 양이 증가하는 현상을 보임을 알 수 있었다. 또한, 고착방지성능을 확인하기 위하여 ASTM G196-08 시험을 통해 코팅조건에 따른 고착현상을 분석하였으며, 그 결과 기존에 코팅되지 않은 304 스테인리스강보다 고착현상이 개선됨을 확인하였다. 따라서 304 스테인리스강 소재의 볼트, 너트 제품에 주석-알루미늄 코팅층을 적용시키면 기존의 고착현상을 개선하고 서비스 품질을 향상시킬 수 있을 것으로 판단된다.

• Clean Technology
• /
• v.17 no.3
• /
• pp.191-200
• /
• 2011

Natural polymers, biopolymers, and synthetic polymers based on renewable resources are the basis for the 21th portfolio of sustainable and eco-friendly plastics but high-volume consumable plastics continue to be dominated by nondegradable petroleum-based materials. Three factors have recently made biodegradable polymers economically attractive: (i) rising costs of petroleum production resulting from the depletion of the most easily accessible reserves, (ii) environmental and economic concerns associated with waste plastics, and (iii) emissions of carbon dioxide from preparation of petroleum-based materials. These pressures have driven commercial applications based on biodegradable polymers which are related to reduction of carbon dioxide in processing, such poly(hydroxy alkanoate) and poly (lactide). Since initial degradation of these polymers leads to catastrophic mechanical failure, it is necessary to control the rate of initial degradation for commercial applications. In this article, we have a critic review on the recent progress of polymer modification for the control of degradation.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2008

Fiber Reinforced Polymer, FRP has a light weight, a high tensile strength based on design, non-electronic, non-magnetic, and rust-resistant feature, etc and many researches are being conducted recently on FRP in the construction area. Among them, GFRP (Glass Fiber Reinforced Polymer) is excellent in price competitiveness and is widely being used. However, since GFRP has a relative low modulus of elasticity and causes excessive deflection, the section must be large to be used as a structural component and an investigative review must be carried out in design to set the limit for deflection by the use load. Therefore, in order to solve the mentioned technical problems, this study suggested a section of a module form such that application of a large-scale section is possible. Also, to secure the low rigidity of FRP, this study developed a new FRP+ concrete composite girder form that confined the concrete. To identify the structural movement of the developed FRP+ concrete composite girder, shear strength test was carried out.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.634-637
• /
• 2008

Performance-based Project Delivery System(PPDS) is one of Project Delivery System that when owner ask for performance than constructor feel free to choose materials, technology, an engineering method. PPDS rank higher position than Performance Warranty Contract and Technical Proposal Bid. This study aims to propose Improvement Idea for PPDS that based Housing Performance Grading Indication System. 'Request-performance Checklist' is used as communication means(between owner and constructor) and a kind of corroborative facts make the procedures achievement of project like contract easier.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.245-248
• /
• 2008

Recently, much research has been conducted on FRP composite to replace steel. However, the concept of FRP girder filled with concrete has not been fully attempted. This study focuses on the analytical behavior of FRP girders filled with concrete. FRP girders usually have large deflection due to relatively low elastic modulus compared to steel members. However, in the previous experimental investigation on small sized modular beams, it has been verified that the displacement of FRP-girder filled with concrete is reduced and the strength is increased considerably. In this research, analytical investigations have conducted to verify the analytical method by comparing the results with tests. In addition, analyses on large girders assembled with small modules have been carried out to predict the feasibility before tests. The analytical results showed that the assembled FRP girders can be used as substitutes for steel girders.

• Journal of Korean Society of Forest Science
• /
• v.19 no.1
• /
• pp.49-54
• /
• 1973

Surveys of stock volume on steep and vast expanse of mountains, involves various difficulties. And it is extremely uneconomical in forest management point of view, to spend lots of time and man power for surveying such tree volume as the value is much cheaper in comparison with volume and weight. Therefore, a stand volume table estimate easely stock volume per hectare basis from aerial photographs was prepared and correlations to stand volume among factors affecting tree volumation, were studied. Data were 114 places selected from planted Korean white pine, Pinus koreiensis Sieb. et Zucc. stands in Kwangnung Experiment Forest and were computed and analysed by the means of the quantification in the multi-variate statistical analysis. Electronic Data Processing System was applied for data processing at Korean Instiute of Science and Technology. Coefficients of multiple correlations of stand volume table was ranged 0.85~0.88.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.401-406
• /
• 2015

Getter is a class of materials used in absorbing gases such as hydrogen and moisture in microelectronics or semiconductor devices to operate properly. In this study, we developed a new device structure consisting of porous anodized alumina films on textured silicon wafer, which have cost efficiency in materials and processing aspects. Anodic aluminum oxide (AAO) with controlled pore sizes can be applied to a high-efficiency moisture absorber due to the high surface area and OH- saturated surface property. The moisture sorption capacity was 2.02% (RH=35%), obtained by analyzing isothermal adsorption/desorption curve.