• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2020.10a
• /
• pp.65-65
• /
• 2020

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.109-119
• /
• 2012

For membrane structure, there are three main steps in design and construction, which are form finding, statistical load analysis, and cutting patterning. Unlike the first two stages, the step of cutting pattern involves the translation of a double-curved surface in 3D space into a 2D plane with minimal error. For economic reasons, the seam lines of generated cutting patterns rely greatly on the geodesic line. Generally, as searching regions of the seam line are plane elements in the step of shape analysis, the seam line is not a smooth curve, but an irregularly divided straight line. So, it is how we make an irregularly divided straight line a smooth curve that defines the quality of the pattern. Accordingly, in this paper, we analyzed interpolation schemes using spline, and apply these methods to cutting pattern generation on the curved surface. To generate the pattern, three types of spline functions were used, i.e., cubic spline function, B-spline, and least-square spline approximation, and simple model and the catenary-shaped membrane was adopted to examine the result of generation. The result of comparing the approximation curves by the number of elements and the number of extracted nodes of simple model revealed that the seam line for less number of extracted nodes with large number of elements were more efficient, and the least-square spline approximation provided smoother seam line than other methods.

• Korean Journal of Pharmacognosy
• /
• v.49 no.4
• /
• pp.349-361
• /
• 2018

Socheongryong-tang (SCRT) was one of the major traditional herbal medicines wildly used in the treatment of respiratory disease. SCRT is being commercially produced in the form of mix extracts powder and soft dry extract by different extract methods in the Korean Herbal Pharmacopeia (KHP). In this study, the contents of marker components and biological activities of the SCRT mix extract powder were compared with those of the SCRT decoction. To analyze the marker components of SCRT, nine marker from eight herbal preparations were chosen. And the method using high performance liquid chromatography (HPLC) with diode-array detector method was established for the simultaneous analysis. Method validation was accomplished by linearity, precision test, and recovery test. The contents of nine marker components in this extract was ascertained by ratio. The biological activities were examined the effect of SCRT on anti-oxidation and pro-inflammation mediated by LPS-stimulation. We confirmed that both of SCRT mix extrct powder and decoction have the similar contents on total polyphenol and flavonoid and inhibited the secretion of nitric oxide (NO), $IL-1{\beta}$, IL-6, tumor necrosis factor $(TNF)-{\alpha}$ and the expression of iNOS, COX-2, $IL-1{\beta}$, IL-6, $TNF-{\alpha}$. These results suggest that SCRT mix extract powder and decoction have a significant correlation.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.100-108
• /
• 2001

An understanding of potential lumber cutting yields may lead to increased utilization of the lower grades of lumber in wood industry. Computer simulations of rough-mill operations require a lumber database as input to give reasonable estimates of such yields. The lumber database must contain detailed information regarding the location and type of defects, and then all manufacturing sequences can be tested with the same raw material. However, no suitable lumber database with mapped defects exists for Korean wood industry. In this study lumber databases of Pinus densiflora S. et Z and Quercus acutissima which are the main Korean domestic species were developed to prepare for coming era of "utilization of domestic species" in the near future. These databases were put into lumber cut-up simulation model(gang-rip-first simulator) to investigate the part yields. Gang-rip first simulation showed average part yields of 44.75% and 63.10% for Quercus acutissima and Pinus densiflora lumber database developed, respectively. In most cases process set-up of fixed blade best feed showed the best part yields and the level of acceptable defects could not make significant differences in part yields.

• Journal of Biomedical Engineering Research
• /
• v.40 no.3
• /
• pp.105-115
• /
• 2019

Brain tumor surgery may be difficult, but it is also incredibly important. The technological improvements for traditional brain tumor surgeries have always been a focus to improve the precision of surgery and release the potential of the technology in this important area of the body. The need for precision during brain tumor surgery has led to an increase in Robotic-assisted surgeries (RAS). One of the challenges to the widespread acceptance of RAS in the neurosurgery is to recognize invisible tumor accurately. Therefore, it is important to detect brain tumor size and location because surgeon tries to remove as much tumor as possible. In this paper, we proposed brain tumor detection procedures for MRI (Magnetic Resonance Imaging) system. A method of automatic brain tumor detection is needed to accurately target the location of the lesion during brain tumor surgery and to report the location and size of the lesion. In the qualitative assessment, the proposed method showed better results than those obtained with other brain tumor detection methods. Comparisons among all assessment criteria indicated that the proposed method was significantly superior to the threshold method with respect to all assessment criteria. The proposed method was effective for detecting brain tumor.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.20-29
• /
• 2002

The composite stock cutting problem is to allocate rectangular and/or irregular patterns onto a large composite stock sheet of finite dimensions in such a way that the resulting scrap will be minimized. In this paper, the distributed simulated annealing with the new cost error tolerant spatial decomposition is applied to the composite stock cutting problem in MPI environments. The cost error tolerant scheme relaxes synchronization and chooses small perturbations on states asynchronously in a dynamically changed stream length to keep the convergence property of the sequential annealing. This paper proposes the efficient data structures for representation of patterns and their affinity relations and also shows how to determine move generations, annealing parameters, and a cost function. The spatial decomposition method is addressed in detail. This paper identifies that the final quality is not degraded with almost linear speedup. Composite stock shapes are not constrained to convex polygons or even regular shapes, but the rotations are only allowed to 2 or 4 due to its composite nature.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.33-42
• /
• 2010

Patterning with a geodesic line is essential for economical or efficient usage of membrane materialsin fabric tension membrane structural engineering and analysis. The numerical algorithm to determine the geodesic line for membrane structures is generally classified into two. The first algorithm finds a non-linear shape using a fictitious geodesic element with an initial pre-stress, and the other algorithm is the geodesic line cutting or searching algorithm for arbitrarily curved 3D surface shapes. These two algorithms are still being used only for the three-node plane stress membrane element, and not for the four-node element. The lack of a numerical algorithm for geodesic lines with four-node membrane elements is the main reason for the infrequent use of the four-node membrane element in membrane structural engineering and design. In this paper, a modified numerical algorithm is proposed for the generation of a geodesic line that can be applied to three- or four-node elements at the same time. The explicit non-linear static Dynamic Relaxation Method (DRM) was applied to the non-linear geodesic shape-finding analysis by introducing the fictitiously tensioned 'strings' along the desired seams with the three- or four-node membrane element. The proposed algorithm was used for the numerical example for the non-linear geodesic shape-finding and patterning analysis to demonstrate the accuracy and efficiency, and thus, the potential, of the algorithm. The proposed geodesic shape-finding algorithm may improve the applicability of the four-node membrane element for membrane structural engineering and design analysis simultaneously in terms of the shape-finding analysis, the stress analysis, and the patterning analysis.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.219-226
• /
• 2003

보 유사법을 이용하여 연속 압축재의 유효길이 계수를 각 경간별로 결정하는 방법을 제안한다. 제안하는 보 유사법은 4가지 단계로 요약할수 있는데 그 첫 단계는 주어진 압축재를 이것과 동일한 단면성능 및 경간을 갖는 연속보로 치환하는 것이다. 제 2단계에서는 연속보 각 경간의 중앙에 가상 집중 횡하중을 작용시킨 후 이로 인한 지점들에서의 재단 moment를 계산한다. 이때 각 경간중앙의 가상 집중 횡하중 방향은 좌굴 mode를 고려하여 교호로 바뀌도록 한다. 제 3단계에서는 또 하나의 제안식과 재단 모멘트를 이용하여 Kinney의 부분 고정도를 결정한다. 최종단계에서는 부분 고정도를 이용하여 유효길이를 각 경간별로 산정 한다. 제안한 방법은 다 경간 압축재에서 어느 경간이 맨 먼저 좌굴을 일으키는지 또한 이때의 임계하중은 어떤 값을 갖는지를 예측하게 한다.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.57-75
• /
• 2015

The study introduces the case of initial adoption and convergence of accounting system under the K-IFRS by the quasi-government entity, the National Research Foundation of Korea(NRF). Followings are the methodology used in the study. (1) The study provides several accounting issues, their impact on the financial information of the NRF and implications about NRF's financial information in the course of convergence of accounting system under the K-IFRS. (2) As examples of accounting issues, the NRF reflected several accounting difference such as revaluation of fixed assets, economic useful life, depreciation method, reclassification of investment, representation of transfer revenue from the government, the timing of revenue recognition, and employ benefits, etc. As results of adjustments under the K-IFRS, the NRF decreased 1,109 billion of total assets and 1,064 billion of total liabilities. Also, increase in operating expenses results a slight decrease in net income, which may have an impact on future management evaluation of the NRF. A successful case of K-IFRS adoption by the NRF which brings deep insight on adoption and convergence of new accounting system to other quasi-government entity.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.399-403
• /
• 2004

Education of clothing and textiles in the university is various according to the purposes. Among that clothing construction and practice is what is needed the most in understanding the process of apparel producing, and is the basic subject of areas from apparel designs to quality management. Producing apparel starts from planning the bodice pattern according to the human body shape. Basic bodice pattern should be highly practical so that production of all items of apparel patterns can be possible. Also, a basic bodice pattern needs to be planned in the way that even beginners can use it by classifying sizes according to each body measurements. Thus in this study. bodice patterns will be produced in way of draping method subjecting university students in early 20s. standardized and classified sizes will be calculated from it and bodice pattern made by studied flat pattern method will be examined and compared so that finally suitability will be compared. As a result of examining and comparing bodice patterns made by draping method and studied flat pattern method on the model of the human body produced by plaster method, sizes were classified into 5 levels. As a result of evaluation of creation. satisfying consequence from various body shape was acquired and it is expected of the beginners who are stating from clothing construction and practice to be educated by using the result of this study.