• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.292-292
• /
• 2020

방조제는 국토 확장, 수자원 확보 및 배수 개선에 사용되는 구조물로, 재난 발생 시 자산, 국가산업 및 환경에 큰 영향을 끼칠 위험이 있다. 따라서, 파도월류, 지진, 투수, 액상화와 같은 다양한 피해 원인에 대비하여 구조적 사용성과 안정성을 확보하기 위해 신중한 검토 및 분석이 수행된다. 그러나 변화하는 환경조건에서 방조제는 다양한 외력의 변동성과 불확실성에 노출되며, 설계 시 고려된 손상 요인이 개별적으로 발생하기보다는 여러 요인이 복합적으로 반응하고 그 영향이 전달되어 피해의 발생과 전파 과정이 복잡한 양상을 나타낸다. 따라서 방조제에 대한 사고 예방 및 안정적인 유지관리를 위해서는 발생 가능한 위험을 종합적으로 고려한 위험도 평가가 중요하게 요구된다. 본 연구에서는 방조제 손상 원인 중 큰 비중을 차지하는 제체 내부 침식 위험에 대하여 위험인자 간 상호작용을 고려할 수 있는 확률통계학적 접근으로 Bayesian network 기법을 도입하였다. 위험인자에 대한 파괴 메커니즘을 조사하여 분류 후, 설계값과 측정자료를 기반으로 위험변수의 통계적 특성을 반영하기 위해 Monte Carlo 시뮬레이션을 수행하여 파괴 매커니즘의 위험도를 계산하였다. 위험도는 연간기대피해액으로 제공되었으며, 이는 방조제 손상으로 인한 피해에 대비하여 예방할 수 있는 솔루션을 제공할 것으로 기대된다.

• Smart Media Journal
• /
• v.12 no.9
• /
• pp.124-133
• /
• 2023

Currently, Korea shares culture, economy, and society together as a member of the international community along with rapid economic growth. In particular, in the 2000s, the construction of local cultural performance halls has been promoted through efforts and methods for the development of local culture. As a result, many local governments built medium-sized or larger performance halls, and achieved both quantitative and qualitative effects by satisfying citizens and attracting visitors. However, this study aims to analyze the safety of the space used by many visitors at the same time and whether an effective evacuation plan is applied to frequent disasters and disaster situations in recent years.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.5
• /
• pp.23-33
• /
• 2020

As the scale of the economy expands, the number of cases of damage in enclosed spaces such as tunnels is increasing due to the accident of transportation vehicles of dangerous substances such as explosive flammable materials that have increased rapidly. In the case of road tunnels in particular, in the aspect of protection against the long-winding trend and the environment in the downtown area, the number of cases of passing through the downtown area increases, and securing the safety of structures against unexpected extreme disasters such as explosions during tunnel passage is very urgent. For this reason, developed countries are already conducting a review of internal bombardment, but there are almost no evaluation and countermeasures for explosion risk in Korea. Therefore, in this study, in order to evaluate the explosion safety of road tunnels, a boiling liquid explosive explosion (BLEVE), which is considered to have the greatest explosion load among vehicles driving on the road, is set as a reference explosion source, and the equivalent TNT explosion load is used for simulation of the explosion. A method of conversion was presented. In addition, by applying the derived explosion load, dynamic behavior simulation was performed by assuming various variables for the tunnel, and the explosion safety of the tunnel was analyzed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.13-19
• /
• 2008

Time synchronization of nodes in sensor network synchronizes sensor nodes to one time clock. This is very essential in sensor networks so that the information collected and reported from the sensor nodes becomes meaningful. If sensor nodes are not synchronized, disaster report with time information can be wrong analyzed and this may lead to big calamity. With the limitation of battery and computing power, time synchronization algorithm imported in sensor nodes has to be as simple as it doesn't need big complexity, nor generates many synchronization messages. To reduce the synchronization error, hop count should be kept small between reference node to initiate synchronization and sensor nodes to be synchronized. Therefore, multiple reference nodes are used instead of single reference node. The use of multiple reference nodes introduce the requirement of synchronization among reference nodes in the network. Several algorithms have been proposed till now, but the synchronization among reference nodes are not well considered. This paper proposes improved time synchronization for sensor networks by synchronizing multiple reference nodes inside the network. Through simulation, we validated the effects of new algorithm.

• Journal of the Korea Convergence Society
• /
• v.10 no.9
• /
• pp.37-45
• /
• 2019

In recent years, the emergence of virtual reality (VR Virtual Reality) technology has provided a new model of safety education, enabling users to learn and respond to disasters in a virtual safety education environment. However, the related VR products related to domestic and foreign R & D are relatively simple, there is no practical training on specific accident, and it is not practical enough to play a sufficient role in safety education. In this paper, the problems and disadvantages of VR technology applied in the field of automobile safety education as an example of automobile accident among the types of disasters are examined, and a system framework of automotive safety education based on VR technology is proposed. The vehicle safety education system proposed in this paper will help users to improve driving safety consciousness, to acquire safety knowledge in driving, and to acquire driving safety skill which is very important for automobile safety education. In addition, the design and production methods of safety education based on VR technology are considered to have important reference implications for the application of modern teaching and teaching theory by integrating with VR technology and developing related teaching materials products and finally introducing education.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.650-657
• /
• 2020

Purpose: In this study, the effectiveness of pilot project of PLSP (Priority Lane and Signal Preference) system, which was operated in Cheongju City, was analyzed. Method: The priority signal was operated by a police officer switching to a blue signal when approaching a fire truck through CCTV, and the priority lane of emergency vehicles was displayed on the road to enable preferential traffic. VISSIM simulation analysis was performed for the 1.2km section (3.8km) of the pilot project section and vehicle data was analyzed for some of the test operation sections. Result: Simulation analysis shows that the moving speed of the emergency vehicle can be increased by 42 km/h with the introduction of PLSP, which can be increased by approximately twice the speed. Travel time was reduced by about 3 minutes, and considerable improvements of 69% compared to cities that are not operating was analyzed. The pilot operation of Cheongju City showed a time-shortening effect of about two minutes on average, with the average time reaching 4 minutes and 14 seconds in the first period and the average time reaching 5 minutes and 40 seconds in the second period. Conclusion: The system has been shown to be effective in minimizing time-to-site arrival of emergency vehicles.

• Journal of the Society of Disaster Information
• /
• v.19 no.1
• /
• pp.161-172
• /
• 2023

Safety education delivered to construction workers in a lecture manner has limitations in concentration and immersion, so delivery power and interest are low. In order to improve unstable behavior through education and prevent safety accidents, it is necessary to change the paradigm to hands-on education. Purpose: Experiential safety education aims to contribute to preventing accidents for construction workers by quickly recognizing risks, improving emergency response skills, and verifying the effectiveness of pre- and post-learning. Method: Based on a survey of workers who experienced the same work environment as the actual construction site, an opinion survey on the pre- and post-safety experience education and a variable measurement tool were planned, and a research hypothesis was established. Results: The Bayesian theory and MC simulation analysis were used to analyze the structural equation model, and the change in construction worker behavior was confirmed through the intended safety (A), non-experiential education in the sub-area of anxiety (B), average, standard deviation, and minimum and maximum values. Conclusion: The effect of education and industrial accidents are reduced only when construction workers are motivated to participate.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.519-531
• /
• 2023

With the aim of preventing safety accidents at construction sites, the company aims to create safe behaviors intended through variables called smart safety and health activities to help reduce industrial accidents. Purpose: It analyzes how smart safety and health activities affect accidents caused by unsafe behavior and changes in worker behavior, which is the root cause, and verifies the hypothesis that it helps prevent safety accidents and protect workers' lives. Method: Smart safety and health activities were selected as independent variables (X), and intended safety and anxiety, which are workers' behavioral intentions, were set as dependent variables (Y), attitude and subjective norms, and planned behavioral control as parameters (M). Exploratory factor analysis, discriminant validity analysis, and intensive validity analysis of safety and health activities were used to analyze the scale's reliability and validity. To verify the hypothesis of behavior change, the study was verified through Bayesian model analysis and MC simulation's probability density distribution. Result: It was found that workers who experienced smart safety and health activities at construction sites had the highest analysis of reducing unstable behavior and performing intended safety behavior. The research hypothesis that this will affect changes in worker behavior has been proven, the correlation between variables has been verified in the structural equation and path analysis of the research analysis, and it has been confirmed that smart safety and health activities can control and reduce worker instability. Conclusion: Smart safety and health activities are a very important item to prevent accidents and change workers' behavior at construction sites.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.93-100
• /
• 2012

Recently, the security monitoring and control systems based on spatial information in various field are operated and being developed according to evolve the spatial information technology. Especially, the CCTV monitoring and control system can be used in various field as a typical system. However, the security vulnerability problems have become an issue because the system connected by computer network and getting bigger than before. Therefore we studied security vulnerabilities of CCTV monitoring and control system which is being developed and operated. In addition, it is important to consider disaster and terrorism with unauthorized changes on location information. Therefore we analyzed the performance of observation when the cameras are break down as a result by hacking to CCTV monitoring and control system.

• Journal of Internet Computing and Services
• /
• v.17 no.5
• /
• pp.17-23
• /
• 2016

Wireless sensor-actuator networks (WSANs) enhance the existing wireless sensor networks (WSNs) by equipping sensor nodes with an actuator. The actuators work with the sensor nodes and perform application-specific operations. The WSAN systems have several applications such as disaster relief, intelligent building, military surveillance, health monitoring, and infrastructure security. These applications require capability of reliable data transfer to act responsively and accurately. Biologically inspired modeling techniques have received considerable attention for achieving robustness, scalability, and adaptability, while retaining individual simplicity. In this paper, an epidemic-inspired algorithm for data dissemination with delay constraints while minimizing energy consumption in WSAN is proposed. The steady states and system stability are analyzed using control theory. Also, simulation results indicate that the proposed scheme provides desirable dissemination delay and energy saving.