• Title/Summary/Keyword: 장치식별

Search Result 363, Processing Time 0.028 seconds

초단파무선통신(VHF) KEYING현상 발생과 대응 방안

  • Lee, Seung-Hui;Bu, Hye-Jeong;Bu, Ji-Un
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.05a
    • /
    • pp.237-239
    • /
    • 2018
  • 선박관제용 VTS시스템은 레이더, 선박자동식별장치(AIS) 등을 이용하여 정보를 수집하여 관제정보가 필요한 선박국에게 초단파무선통신(VHF)를 통하여 전달한다. 레이더와 선박자동식별장치(AIS) 등은 장비를 이중화하여 안정적인 운영을 할 수 있지만, 관제장비에서 가장 중요한 역할을 담당하는 초단파무선통신(VHF)는 장비만을 이중화하는 것으로 부족한 이유는 바로 주로 선박국이나 육상국에서 일어나고 있는 KEYING현상 때문이다. 최근 제주, 목포, 완도, 여수연안 VTS 등에서 동시 발생한 VHF KEYING 현상을 분석하여 효율적인 대응 방안을 제시하고자 한다.

  • PDF

Sectorizztion effectiveness using Yagi antenna in the maritime mobile service (해상이동업무에서 야기 안테나를 사용한 섹터 수신 효과)

  • Kim, Byung-ok
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2016.10a
    • /
    • pp.195-196
    • /
    • 2016
  • In the maritime mobile radiocommunication service, AIS(Automatic Identification System) devices are most widely using for the exchange of ship's navigational information. The AIS time slot usage increases due to increasing number of ships installed with AIS, and thus the reception rate of AIS data decrease. In order to mitigate this problem, international organizations recommend a sectorised receiving technique using directional antenna. This paper analyzed the sectorised receiving effectiveness of AIS data using Yaga antenna.

  • PDF

Comparison of Heat Exchanging Performances Depending on Different Heat Exchanging Pipe Arrangement (열회수장치의 열교환 파이프형식별 열교환 성능 비교)

  • 서원명;윤용철;강종국;김정섭
    • Proceedings of the Korean Society for Bio-Environment Control Conference
    • /
    • 2001.04b
    • /
    • pp.100-102
    • /
    • 2001
  • 본 연구에서는 온실의 난방에 사용되는 열풍식 난방기 등의 배기 연통에 부착하여 배출되는 가스로부터 열을 회수할 수 있는 장치를 개발함에 있어서 연통과 열회수 장치간의 열 교환 성능을 3가지 상이하게 설계된 열 교환 장치(Fig. 1 참조)에 대하여 실험적으로 비교 분석하였다. Fig. 1-(a)는 열 교회수기 개발을 위해 기존에 사용한 장치로서 회수용 공기의 흐름방향이 배기 연통과 직각을 이룬 형식이며, Fig. 1-(b) 및 (c)는 열 회수 성능 개선을 위해 새로 설계된 형식으로서 각각 열 교환 파이프의 배치형식이 상이하나 회수용 공기의 흐름방향이 180도로 굴곡되는 U-자형 흐름이 이루어지도록 하였다. 실험에 사용된 공기 순환 펜의 용량은 AB-형의 경우에는 최대 25㎥/min이고, C-형 및 D-형의 경우는 공히 최대 42㎥/min으로서 송풍전압 조절장치를 이용하여 풍량을 연속적으로 조절할 수 있도록 하였다. U-자형 흐름형식인 C-형 및 D-형의 경우 흐름 방향의 굴곡으로 인한 마찰저항이 있을 것으로 예상은 했으나 당초 예상했던 것에 비해 마찰 저항이 지나치게 큰 것으로 밝혀졌다. 비록 설계된 열교환 튜브의 배열형식별 열 교환기의 외부 모양이 달라 회수기의 표면을 통한 대류 열 교환이 다소 차이를 보일 것으로 예상되지만 본 연구에서는 열 회수장치에 내장된 열 교환 튜브부분만을 통한 열 회수율을 중심으로 형식간의 성능을 비교하였다. 실험을 통하여 측정된 자료중 대표적인 예는 Fig-2와 같으며, 측정자료를 기준으로 분석된 열회수 성능에 대한 설계형식별 비교 결과는 Table-1과 같으며, 분석된 결과를 요약하면 다음과 같다: 1. AB-형 열회수시스템의 경우, 초기 투자비용과 현재의 농용 전력요금 하에서 에너지 절감규모를 비교하면, 대체로 1년을 전후하여 투자에 대한 보상이 충분히 가능할 것으로 판단된다. 2. C-형 및 D-형 열회수시스템의 경우, 열 회수용 공기의 흐름방향이 동일 공간내에서 180도 굴절됨으로서 저항이 크게 발생되어 송풍 펜의 전압 증가에 따른 유속증가가 미미하였으며, 굴절형의 열교환장치는 비록 열교환면적은 직선형과 유사하더라도 송풍 펜의 공기저항이 커져서 결국 열 회수성능이 기대했던 것만큼 크게 개선되지는 못했다. 3. 송풍펜의 용량은 AB-형에 사용된 용량인 25㎥/min 전후가 적절할 것으로 판단되며, 적정 송풍 펜용량 하에서 열 회수성능은 굴절형이 직선형보다 효과적인 것으로 나타났다. 다만, 곡선형은 물론 직선형에서도 열교환 튜브의 배치밀도, 튜브 길이 및 두께 등의 변화에 따른 최적화 연구가 수반되어야 할 것으로 판단된다.

  • PDF

Improvement in Performance of ATM Network Interface Card and Performance Evaluation (ATM 망 접속 장치의 성능 향상 방법과 성능 평가)

  • Kim, Cheul-Young;Lee, Seung-Ha;Na, Yun-Joo;Nam, Ji-Seung
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2001.10b
    • /
    • pp.1383-1386
    • /
    • 2001
  • Internet 이용자의 급격한 증가와 광대역 통신망(B-ISDN) 구축의 확산에 따라 ATM(Asynchronous Transfer Mode)망 접속장치의 큰 수요가 기대되며, 또한 ATM망 접속장치의 성능 향상도 요구되고 있다. 기존의 연구들은 컴퓨터 프로그램의 메모리에 대한 참조가 지역적이라는 특성을 이용한 가상 메모리의 효율적인 페이지 교체 알고리즘 및 캐쉬 처리 방안들이 진행되어 왔다. 본 논문은 ATM 프로토콜 프로세서를 설계하는데 있어 네트워크 트래픽의 지역성(Locality of Reference)을 고려한 캐쉬 메모리 구조를 적용하여 보다 향상된 ATM 셀 수신이 가능하도록 한다. ATM 셀의 가상 패스 식별자/가상 채널 식별자(VPI/VCI)를 캐쉬 처리함으로써, 패킷을 분해, 재조립(Segmentation and Reassembly)할 때 관련 테이블의 검색 시간을 줄일 수 있다. 캐쉬 메모리 적용으로 인한 성능 향상을 평가하기 위해 ATM NIC 프로세서와 내부 캐시 메모리 그리고, 외부 SRAM 사이에 셀 수신 정보의 Read 와 Write에 드는 시간 비용(System Clock Cycle)을 캐시의 Hit 또는 Miss 등에 따라 구분하고, 이를 기반으로 한 시뮬레이터에 3 종류의 ATM 셀 스트림을 가하여 각각에 대해 평균 셀 처리시간, 데이터 버스의 트래픽 비율 그리고, 히트율의 3가지 평가요소를 측정하고, 비교하였다.

  • PDF

Concept Design of Marine-RFID (해상 RFID 개념 설계)

  • Ku, Ja-Young;Yim, Jeong-Bin;Jeong, Jung-Sik;Nam, Taek-Keun;Lee, Jae-Eung
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.29 no.1
    • /
    • pp.153-161
    • /
    • 2005
  • Recently, The government of Korea declared to develop RFID(Radio Frequency IDentification) as one of key strategic technology to perform U-Government using Ubiquitous technology. But, most of the related technologies for RFID are mainly focused on the inlaned application excepting marine applications. The last target of this study is to implement new Marine RFID(M-RFID) that can cover all of EEZ areas as large five times as inland volume. In this paper, as a basic study for the M-RFID, we carried out an establishing the concept design of M-RFID, developing the construction method of M-RFID and, extending the idea of M-RFID. As studying results, it is known that the M-RFID can be use in many practical areas such as the protection of EEZ area and aqua culture, the safety of fisher man, the disaster control for inlander and, fisheries ligistics with real-time.

  • PDF

Implementation of AIS Transponder with a New Time Synchronization Method (새로운 시각 동기 방안을 적용한 자동 식별 장치의 구현)

  • 이상정;최일흥;오상헌;윤상준;박찬식;황동환
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.40 no.7
    • /
    • pp.273-281
    • /
    • 2003
  • This paper proposes a new time synchronization scheme for the Automatic Identification System(AIS). The proposed scheme utilizes a Temperature Compensated Crystal Oscillator(TCXO) as a local reference clock, and consists of a Digitally Controlled Oscillator(DCO), a divider, a phase comparator, and register blocks. Primary time reference is IPPS from GPS receiver that is synchronized to Universal Time Coordinated(UTC). And if GPS is unavailable, other station's signal is utilized as secondary time reference. The phase comparator measures time difference between the 1PPS and the generated transmit clock. The measured time difference is compensated by controlling the DCO and the transmit clock is synchronized to the Universal Time Coordinated(UTC). The synchronized transmit clock(9600Hz) is divided into the transmitting time slot(37.5Hz). The proposed scheme is tested in an experimental AIS transponder set. The experimental result shows that the proposed module satisfies the timing specification of the AIS technical standard, ITU-R M.1371-1.

A study on the estimation of underwater shipping noise using automatic identification system data (선박자동식별장치 데이터를 이용한 수중 선박소음 추정 연구)

  • Park, Ji Sung;Kang, Donhyug;Kim, Hansoo;Kim, Mira;Cho, Sungho
    • The Journal of the Acoustical Society of Korea
    • /
    • v.37 no.3
    • /
    • pp.129-138
    • /
    • 2018
  • In port and coastal areas where ship traffic is frequent, ship noise dominantly influences underwater noise in low frequency band below 1 kHz. In this paper, we propose a modeling method to estimate the underwater shipping noise using the voyage information of ship observed in AIS (Automatic Identification System). For the purpose of ship noise modeling, the navigation information of the vessels operating in the southern part of Jeju was observed using AIS and underwater noise was measured by installing a hydrophone in the experimental area to verify the modeled ship noise. AIS data were used to model the noise level of ship and compared with measured underwater noise. The variation of noise level with time was found to be similar, and the cause of the error was discussed. Through this study, it was confirmed that the noise level of ship can be estimated within 5 dB error range using AIS data.

Study on the Swine Farming Facilities by Survey for the Development of the Optimum Production System Models (최적화 생산시스템 모델 개발을 위한 양돈시설의 조사 연구)

  • 장동일;이봉덕;조한근;장홍희
    • Journal of Animal Environmental Science
    • /
    • v.2 no.1
    • /
    • pp.1-11
    • /
    • 1996
  • This study was conducted to analyze the present status and the levels of mechanization and automation for raising, feeding, water supply, propagation, health management, ventilation and heat control, data analysis, and etc, and to establish the guide of the future study on development of the optimum production system models of swine facility from the results of this analysis. The scheme of the future study on the development of the optimum production system model of swine facility was established as follows : 1. A Korean and environmental control type slatted windowless swine housing model would be developed according to the following basis : \circled1 Boars, gilts and sows, delivery sows should be raised individually and piglets, growing pigs, and finishing pigs should be raised in group. \circled2 The arrangement of furrowing house were two rows of furrowing crates facing the center aisle. 2. The environmental control system and waste management system that are suitable to Korean and environmental control type slatted windowless swine housing model would be developed. 3. An electronic identification device would be developed. 4. The automatic individual wet feeding system by electronic identification device and computers would be developed. 5. The individual management system would be developed, which could manage individually the breeding pigs by the electronic identification device. 6. An expert system would be developed, which could manage the health and data base of pigs.

  • PDF

Classification of Passing Vessels Around the Ieodo Ocean Research Station Using Automatic Identification System (AIS): November 21-30, 2013 (선박자동식별장치(AIS)를 이용한 이어도 종합해양과학기지 주변 통항 선박의 분류: 2013년 11월 21일~30일)

  • Hong, Dan-Bee;Yang, Chan-Su
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.17 no.4
    • /
    • pp.297-305
    • /
    • 2014
  • In this study, we installed the Automatic Identification System (AIS) receiver on the Ieodo Ocean Research Station (IORS) from November 21 to 30, 2013 in order to monitor marine traffic and fishery activity in the jurisdictional sea area. The collected AIS raw data consist of static data report (MMSI, IMO NO., Call Sign, Ship Name, etc.) and position information report (position, speed, course, etc.), and the developed program was applied to classify ships according to ship flag and type information. The nationalities are released from the first three-digit numbers (MID) of MMSI, but in general most of small ships do not send an exact ship flag through Class B type AIS, a simplified and low-power equipment. From AIS data with flag information, ships under the flag of China had the highest frequency and the second was Korean flag, while in ship type cargo and fishing vessels were dominant in sequence. As for the ships without flag information, we compared the tracks with others in order to estimate ship flags. It can be said that fleets of ships with Chinese frequently appear sail together for fisheries over the waters, because the unknown ships followed a similar moving pattern with Chinese fishing vessels.

International Trends for Utilization of Maritime Radio Communication Systems (해상무선통신시스템의 적용에 관한 국제동향 연구)

  • Jeong, Jung-Sik;Kim, Byung-Ok;Jang, Dong-Won;An, Kwang;Choi, Seong-Yong
    • Proceedings of KOSOMES biannual meeting
    • /
    • 2006.05a
    • /
    • pp.177-183
    • /
    • 2006
  • IMO and ITU-R have done an intensive study to develop performance standards and technical standards of maritime digital communication systems, respectively. In particular, each administration strives to develop new agenda items of adopting digital new technologies. IMO COMSAR submitted draft performance standard of LRIT to IMO MSC, so that IMO mandates carriage requirement of LRIT In addition to that, COMSAR is preparing performance standard of AIS-SART, and approved the utilization of mobile phones for SAR activities. On the other hand, a new agenda item concerning E-navigation strategy was submitted to MSC 81th meeting. These challenges toward enhanced maritime radio communication systems would make it change largely the concepts of traditional navigation We suggest future directions of maritime information communication systems, investigating the study results of IMO and ITU-R.

  • PDF