• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2004

This study was carried out to investigate the sheet properties of Indian mallow Hanji, made by different pulping methods, such as alkali and sulfomethylated pulpings, and different stock compositions, various mixing ratios of bast fiber and woody core fibers. Indian mallow hanjis made from the sulfomethylated pulps had higher brightness and sheet strength than the alkali pulps. It was found that the brightness of sulfomethylated pulp was enough high without an extra-bleaching. In the mechanical properties of Indian mallow hanjis mixed with bast fiber and woody core stalk pulps, the sheet strength were decreased as wood core pulps contents were increased. The sheet formation were increased as the increase of woody core pulps contents, while the sheet strength decreased. Although the sulfomethylated pulping resulted in higher pulp yield, no morphological differences of fiber surfaces were shown as compared to the different pulping methods.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.15-22
• /
• 1970

This experiment is to investigate the influence on business by varying the scouring condition of raw silk. The conditions of experiment are changed by temperature, time concentration and scouring reagent as well as the pH value of scouring solution, involving the repeat number of treatment in the same reagent solution. The results are as follows. 1) The shorter the scouring time, the more lousiness showed on law silk. The difference of lousiness quantity are especially remarkable between 30 min. and 60min, while the appearance of lousiness is slight between 50min. and 90min. 2) The lousiness shape was just like splited end and short wool fiber type during than 60 min. scouring, and splited end and long wool fiber type was appeared during 120 min. scouring. 3) The seperation of threads on silk panel was difficult with undissolved sericin in case of lower than 90$^{\circ}C$ of scouring temperature, so that it was almost impossible to inspect lousiness. 4) In case of repeating one after another scouring in the same solution, the more number of treatment, the less sho wed lousiness. Little difference were appeared in the quantity of lousiness from first to eighth repeated scouring, while large difference of quantity was appeared between 8th and 9th repeated scouring. 5) The quantity of lousiness was also increased until scouring reagent (Marseilles soap) is added to 0.75％, but rather decreased with more than 0.75％ of soap. The most variety of lousiness quantity was occured when the concentration of soap is changed from 0.15％ to 0.20％. 6) The peculiarities of lousiness shape by the concentration of scouring reagent were as followings; most of lousiness are splited end short wool fiber type with lower wool fiber type with higher than 0.75％, and the mixture of both the former and the latter with 0.5％ concentration. 7) The quantity of lousiness by the kind of scouring reagent was the least with 5％ of Na$_2$CO$_3$ solution, and the most with the mixture of 0.25％ Marseilles soap and 0.25％ Na$_2$CO$_3$. 8) The more increased pH value, the more lousiness showed. The peculiarities of lousiness shape was the splited end and short wool fiber type, and the end and long wool fiber type with higher value of pH 11 because of the decreased strength of threads and the cutting of brin. 9) With the discussions mentioned the above, the scouring conditions to decrease the lousiness quantity are summarized as follows. (1) It is better to take the possible long time of scouring. (2) Temperature should be kept higher than 95$^{\circ}C$ for complete scouring. (3) It was the best to use 0.5％ of Marseiles soap as scouring reagent. (4) No good results were produced by using the mixture of scouring reagent. (5) The best pH range of scouring solution was 9.5 to 10.5.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.363-375
• /
• 2015

This research investigated the effects of diameter and material of energy frame on the impact velocity or strain rate of Strain Energy Frame Impact Machine (SEFIM). The impact speed of SEFIM have been clearly affected by changing the diameter and material of the energy frame. The reduced diameter of the energy frame clearly increased the impact velocity owing to the higher strain at the moment of coupler breakage. And, titanium alloy energy frame produced the fastest speed of impact among three materials including steel, aluminum and titanium alloys because titanium alloy has faster wave velocity than steel. But, aluminium energy frame was broken during impact tests. In addition, the tensile stress versus strain response of high performance fiber reinforced cementitious composites at higher and wider strain rates between 10 and 72 /sec was successfully obtained by using four different energy frames.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.25-35
• /
• 1997

오늘날 열대림 면적의 급격한 감소, 지구온난화등 지구환경 보전의 관점에서 이들 목재이외의 자원의 활용 및 양마와 같은 새로운 비목재자원 개발의 중요성이 재인식되기에 이르렀으며, 이 가운데서 양마는 생장이 라르고 수확량이 크며, 목질부의 단섬유는 물론 긴 섬유장을 가진 인피부섬유로 구성되어 있고, 실리카함량도 매우 적어, 특히 산림자원이 부족한 개발도상국에서 펄프.제지용 자원으로서 주목되고 있다. 양마가펄프.제지용자원으로서 오늘날과 같은 세계적 주목을 받게 된 것은 미국 농무성 북부지역연구센타 에서 이루어진 “새로운 섬유작물”에 관한 기초연구에서 양마가 제지용 섬유작물로서 높이 평가되고 있다. 양마의 경우 인피부는 비교적 리그닌함량이 적고, 목질부는 활엽수재에 가까운 리그닌을 함유하고 있는데다, 섬유형태에 있어서도 인피부와 목질부간에 큰 차이가 발견된다. 본 연구에서는 양마를 중성아황산법으로 전처리하여 제조한 반화학펄프로 부터 제조한 종이의 광학적 성질을 검토하였다 펄프의 광학적 성질은 원료의 화학적 조성,섬유의 형태, 부위.화학적 처리정도, 원료의 저장기간 및 충전제의 첨가에 따라 크게 영향을 받았다. 장섬유와 낮은 리그닌함량을 가진 전간부 펄프시트는 불투명도가 낮았으며, 목질부 펄프로부터 상대적으로 밀도가 다소 높고, 불투명도도 높은 종이를 만들 수 있었다. 펄프원료의 저장기간이 백색도를 낮추었으며, 불투명도에는 그다지 영향하지 않았다. 약품전처리 및 표백이 백색도 및 불투명도에 크게 영향하였고, 특히 충전제 첨가로 광산란을 증가시켜 불투명도가 높은 종이를 제조할 수 있었다.6. CL종의 난황콜레스테롤 수준에 대한 계란의 일령 상호간에는 전체적으로 상호간에 차이가 없었다. 7. 26주령시 혈중콜레스테롤 수준은 CL종이 다른 두 육계종들 보다 유의적 (P$\leq$0.05)으로 높았다. 8. 성별간 혈중콜레스테롤 수준의 차이는 CL종, BR1 및 BR2 중에서 CL종에서만 나타났으며, 수컷은 암킷보다 혈액 100 mL당 약 90 mg이 낮았다.구체적인 생화학적인 연구가 이루어져야 될 것으로 여겨진다.야 할 것으로 사료된다. 냉장 저장을 하고 저장기간이 길어질 경우는 냉동저장을 사용하는 것이 바람직하다고 생각된다.S, FOS나 말티톨로 대체된 스폰지 케익은 설탕 100% 사용한 케익과 비교하여 크게 나쁘지 않거나 휠씬 나은 특성을 보이므로 스폰지 케익 제조에 그들의 이용이 가능함을 확인하였다.thione 같은 다른 항산화제의 절약 효과, CYP2El의 유도 저하를 통하는 것으로 생각되며 그중 어떤 것에 가장 큰 영향을 받는 지는 아직 알려지지 않았고 더욱 많은 연구가 요구된다.우와 사료에 $\omega$3계 지방산 급원을 첨가, 동물에게 이행시켜 $\omega$3계 지방산 강화식품을 제조하는 두 가지 방법이 있을 수 있는데 전자는 통조림, 과자, 건강보조식품류에 다용되며 후자는 다양한 기능성 축산식품에 활용되고 있다. $\omega$3계 지방산 강화 축산식품에는 돼지고기, 우유, 치이즈, 계란, 분유, 햄 등 다양한 제품에 활용, 개발되고 있으며 최근에는 이러한 식품 개발에 더욱 박차가

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.2
• /
• pp.102-106
• /
• 2007

While the effort has been made in recycling the FRP (Fiber Reinforced Plastic) used for the medium-to-small size ships, researchers try to find out the methods more favorable for the environments and more value-added. In respect to the fact that the FRP consists of two types of layers, roving and mat, differentiated by the 2-dimensional structure, our group was able to separate the layers of FRP instead of grinding it. The roving cloth was cut to the long glass fibers (about 50 mm long; calling it 'F-fiber' afterwards). F-fiber showed increasing tensile strength and chemical-resistance possibly due to the remained resin (about 25% by weight). In this experiment fiber-reinforced mortars are made of the F-fiber as a recycling method of FRP. The mortar containing 2% (v/v) F-fiber results in 34.6% increment of bending strength from the standard after 28 day curing. The resulting strength is similar to that of the mortar with imported polyvinyl fiber P-54. These results imply that F-fiber can be applied to the 'fiber reinforced mortar' and furthermore may be a substitute for the imported fibers.

• Journal of the Korea Concrete Institute
• /
• v.21 no.6
• /
• pp.705-712
• /
• 2009

HPFRCCs (high-performance fiber reinforced cementitious composites), which is relatively more ductile and has the characteristic of high toughness with high fiber volume fractions, can be used in structures subjected to extreme loads and exposed to durability problems. In the case of PVA (polyvinyl alcohol) fiber, it is noted by former studies that around 2% fiber volume fractions contributes to the most effective performance at HPFRCCs. In this study, flexural tests were carried out to evaluate the flexural behavior of HPFRCCs and to optimize mix proportions. Two sets of hybrid fiber reinforced high performance specimens with total fiber volume fraction of 2 % were tested: the first set prepared by addition of short and long PVA fibers at different combination of fiber volume fractions, and the second set by addition of steel. In addition, in order to assess the performances of the HPFRCCs against to high strain rates, drop weight tests were conducted. Lastly, the sprayed FRP was applied on the bottom surface of specimens to compare their impact responses with non-reinforcing specimens. The experimental results showed that the specimen prepared with 1.6% short fibers (REC 15) and 0.4% long fiber (RF4000) outperformed the other specimens under flexure, and impact loading.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.478-500
• /
• 1994

The preparation of potassium hexatitanate whisker by flux method was investigated. In this study, 8 types synthesis of flux such as $V_2O_5$, $Bi_2O_3$, $B_2O_3$, $Pb_3O_4$, KCl, $K_4P_2O_7$, $K_2WO_4$ and $K_2MoO_4$ were tested to find a suitable flux for the synthesis of potassium hexatitanate whisker. Effects of various reaction variables such as reaction temperature, time, $TiO_2$ mole ratio to $K_2CO_3$, flux mole ratio to the mixture of $K_2CO_3$ and $TiO_2$, and slow-cooling treatment on the crystallization of potassium hexatitanate whisker were investigated. $K_2MoO_4$ and $K_2WO_4$ were better flux than others tested for the synthesis of potassium hexatitanate. In the presence of $K_2MoO_4$ or $K_2WO_4$ flux, the optimum condition for the synthesis of potassium hexatitanate whisker was that reaction temperature of $1000{\sim}1100^{\circ}C$, reaction time of 5 hours, $TiO_2$ mole ratio to $K_2CO_3$ of 6.0, and flux mole ratio to mixture ($K_2O+nTiO_2$) of 4.0. Slow-cooling treatment showed good effect on the growth of long fibrous potassium hexatitanate.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.367-373
• /
• 1999

Increasing consumer demand for recycle of most paper products is challenging manufacturers to use lower value raw materials while maintaining high quality. This study was carried out to investigate the composition of old corrugated containers (OCC) and to manufacture printing and writing papers of over 85% (ISO) brightness by ECF and TCF bleaching from OCC. Fiber length of American old corrugated container (AOCC) was longer than that of Korean old corrugated container (KOCC) in fiber length. The former was composed of unbleached kraft pulp (UKP) of about 80 percentage, the latter about 20 percentage. OCC is feasible for manufacturing of pulps i.e., AOCC is for printing and writing papers and KOCC is for whiteboards, in the aspects of brightness and mechanical properties on the other hand, the cost of manufacturing upgraded papers by OCC is high because of bleaching chemicals. Neverthless, considering various aspects, especially environment, there are many advantages in recycling. In case of the treated AOCC pulp, over 85% (ISO) brightness can be achieved through TCF or ECF bleaching step, while the treated KOCC pulp did not allow high brightness through TCF bleaching. The tensile index of the bleached KOCC pulp was lower than that of the bleached AOCC pulp, but the burst and tear index of KOCC was higher than that of AOCC.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.29-37
• /
• 2012

This study is to find out the characteristics of the behavior of Geosyntehtic Reinforced Retaining Earth Wall(GRREW) through the laboratory experiment with the reduced-scale model, and to verify the effect of reinforcement by materials of GRREW. The loading tests after combining nonwoven geosynthetic, re-bar mesh nets and drainage blocks respectively among the components of the GRREW were performed in three cases of their slopes. In the cases of the behavior analysis including all of the components of the GRREW, the maximum horizontal displacement was generated 8.4mm at the location of 0.57H in the slope of 1:0.3; 3.8mm at the location of 0.57H in the slope of 1:0.6; 3.6mm at the location of 0.86H in the slope of 1:1.0. On average, the horizontal displacements of the GRREW were reduced by 83.8% against those of the original slopes. Lastly, seepage analysis and slope stability analysis were performed by modelling section of field, to confirm the effect of installation of drainage block in GRREW. We can confirm to compare increasing the slope safe factor and decreasing ground water in accordance with drainage blocks.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.765-772
• /
• 1993

Two-dimensional potassium tetratitanate ($K_2Ti_4O_9$) and three-dimensional potassium hexatitanate ($K_2Ti_6O_{13}$) fibers have been prepared by the combined method consisting of the flux melting (1150$^{\circ}C$)-slow cooling (cooling rate = 5$^{\circ}C$/h) process from the starting raw materials of $K_2CO_3$, and $TiO_2$ with the flux of $K_2MoO_4$. It was found that the fiber growth reaction is strongly dependent upon the mole ratio of flux (F) to raw material (R), which is 7 : 3 (F : R) as for the optimum growth condition. Relatively long fibers (average length ${\thickapprox}$ 4 mm) with a mixture of $K_2Ti_4O_9$ (major) and $K_2Ti_6O_{13}$ (minor) could be obtained when the reaction was carried out for the $K_2MoO_4-$K_2O{\cdot}4TiO_2$ (F : R = 7 : 3) system, but for the $K_2$MoO_4$-$K_2O{\cdot}6TiO_2$ (F : R = 7: 3) one, only the short fibers with ${\thickapprox}$ 2 mm long could be grown as the mixed phase of $K_2Ti_6O_{13}$ and $K_2Ti_4O_9$.