• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.368-377
• /
• 2000

This study was conducted to examine the recent developments in timber certification schemes at global level such as FSC certification and ISO 14001 system and to analyze their potential impacts on the Korean forest products trade. Data and information on standards and procedure of timber certification and certified forest lands were collected from relevant papers, statistics and reports published by regional and international organizations. In order to analyze the impacts on the Korean forest products trade, questionnaire survey to the affected parties was conducted on acknowledge of key words relating to environment and trade and on the additional amount of willingness to pay for a labeled timber from environmentally sound and sustainably managed forests. Quantities of certified timbers supplied would continue to increase due to lots of timber certification schemes developed and implemented at national, regional and global levels and growing interests in certification from many countries. Demand for certified timbers, however, is far from clear at this stage. The deciding factor would be consumer reaction to the certified products. In the short run, the timber certification would have a little impacts on forest products imports into Korean markets since domestic purchasers do not have much interests in environment related trade measures and their willingness to pay price premiums for certified timbers is not high. However, it could be expected that timber certification has negative impacts on exports of forest products, such as flooring and plywood, to developed European markets where timber certification is used as a trade barrier.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.133-133
• /
• 2008

Recently, as the down-scailing of field-effect transistor devices continues, Schottky-barrier field-effect transistors (SB-FETs) have attracted much attention as an alternative to conventional MOSFETs. SB-FETs have advantages over conventional devices, such as low parasitic source/drain resistance due to their metallic characteristics, low temperature processing for source/drain formation and physical scalability to the sub-10nm regime. The good scalability of SB-FETs is due to their metallic characteristics of source/drain, which leads to the low resistance and the atomically abrupt junctions at metal (silicide)-silicon interface. Nevertheless, some reports show that SB-FETs suffer from short channel effect (SCE) that would cause severe problems in the sub 20nm regime.[Ouyang et al. IEEE Trans. Electron Devices 53, 8, 1732 (2007)] Because source/drain barriers induce a depletion region, it is possible that the barriers are overlapped in short channel SB-FETs. In order to analyze the SCE of SB-FETs, we carried out systematic studies on the Schottky barrier overlapping in short channel SB-FETs using a SILVACO ATLAS numerical simulator. We have investigated the variation of surface channel band profiles depending on the doping, barrier height and the effective channel length using 2D simulation. Because the source/drain depletion regions start to be overlapped each other in the condition of the $L_{ch}$~80nm with $N_D{\sim}1\times10^{18}cm^{-3}$ and $\phi_{Bn}$ $\approx$ 0.6eV, the band profile varies as the decrease of effective channel length $L_{ch}$. With the $L_{ch}$~80nm as a starting point, the built-in potential of source/drain schottky contacts gradually decreases as the decrease of $L_{ch}$, then the conduction and valence band edges are consequently flattened at $L_{ch}$~5nm. These results may allow us to understand the performance related interdependent parameters in nanoscale SB-FETs such as channel length, the barrier height and channel doping.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.567-576
• /
• 2017

The object of this research is an establishment of BIM-based quantity takeoff(QTO) and cost estimation guidelines for reinforcement concrete structures focused on improvement of field applicability in transition period from 2D drawing-based environment to 3D BIM-based environment. Preliminary studies on existing guidelines and standards for BIM modeling, QTO and cost estimation of reinforcement concrete structures are performed, and then a standardization of BIM-based cost estimation process is proposed through comparative analysis between 2D drawing-based cost estimation process and 3D BIM-based. In addition, modeling, QTO, and cost estimation processes of cost-BIM model for RC structures are conducted. The contributions of this research and the guidelines suggested by this research are 1) lowering barriers to entity to the new BIM-based environment for small size companies, 2) reducing construction cost by a close estimate, 3) establishing the foundation for integrated management of informations through construction project life cycle, 4) and ultimately, developing the BIM ecosystems.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1999.10a
• /
• pp.70-74
• /
• 1999

발전소 시뮬레이션 시스템 기술은 종합적인 지식을 바탕으로 자료수집 및 분석, 소프트웨어 개발 환경, 수학적 모델, 전산기 구성, 각종 계기류 설계 및 구매 장착 등의 노하우를 알아야만 제작할 수 있는 종합적인 기술이다. 또 지시기반의 기술이며 부가가치가 높은 기술이기 때문에 선진 각국에서는 계측제어 시스템의 기술개발 및 시장 확대를 위하여 힘을 쓰는 동시에 타국으로의 기술정보 유출을 경계하는데 신경을 곤두세우고 있다. 현재 복잡화되어 가고 있는 산업 사회의 전력 수요에 대한 대폭적인 증가 추세에 따라 발전소에서는 보다 효율적이며 합리적이고 경제적인 전력 공급을 위해서 전력 생산에 대한 신뢰성 향상 및 안정성 확보는 물론, 효율성 높은 운전이 절실히 요구되고 있다. 한편, 국내의 시뮬레이션 시스템 분야 기술은 아직도 완벽한 수준에는 미치지 못하며, 이 분야의 기술력 확보 및 신기술 개발은 향후 미래의 모든 시스템산업의 성쇄를 판가름하는 아주 중요한 척도가 될 것이다. 이 중에서 접지 분야는 고전압 혼촉에 의한 저압측 선로의 전압상승 방지, 모선(Bus)이나 전력 기기의 절연보호 및 회로전압의 안정등으로 시스템 성능을 한층 증가 시켜줄 뿐아니라 기기의 오동작이나 낙뇌등으로 인명피해 발생을 없애주는 아주 중요한 분야임에도 불구하고 이 분야의 국내 관련법규등이 미비한 사항이다. 그래서 발전소 분산제어 시스템분야의 장기간 신뢰성 및 안정성을 가지고 있고, 국내에서 많이 사용하는 미국 Bailey의 infi-90 및 독일 ABB의 Procontrol-P를 비교 분석하여 발전소 시뮬레이션 시스템의 접지에 응용 하고져 한다.상호 발생기를 이용한 다양한 시스템 검증 및 분석에 이용할 수 있을 것이다. 본 논문은 가상호 발생기의 구조와 최대 용량 시험 방법을 소개하고, 더 나아가 호 Traffic에 대한 최대 용량 시험뿐 아니라 QoS를 향상시키기 위한 교환 시스템의 제반 성능 시험 및 분석에 이를 이용하기 위해 개선이 필요함을 서술하고자 한다.textrm{m}$~3.4$\mu\textrm{m}$ 범위에서의 투과 및 흡수 스펙트럼을 측정하였다. 결정 성장 결과 B3+, Er3+, Cr3+ 이온은 Ti4+ 이온과 이온의 크기 차이가 심하여 결정의 정상적인 성장을 방해하는 물성을 나타냈고, V5+, Cr3+ 이온은 흑색의 결정, Fe3+ 이온은 적갈색의 결정으로 성장되었다. Al3+, Zr4+, Al3+의 순서로 투과도가 높아지는 것이 관찰되었다. 불순이온의 농도에 따른 영향으로서 Al3+ 이온의 경우 주입농도가 높아질수록 low angle boundary와 oxygen deficiency가 감소하였고, 투과율은 조금 감소하거나 큰 차이가 없는 것으로 나타났다. 반면에 Cr3+ 이온을 주입한 경우 0.003 atomic%에서 최적의 물성을 보였으며, 주입농도가 높아질수록 결정성장이 어려워지고 광의 투과도가 급격히 저하되었다.은 1.3을 나타내었다.로 보인다.하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.279-282
• /
• 2006

Magnetic tunnel junctions (MTJs), which consisted of amorphous ferromagnetic NiFeSiB free layers, were investigated. The NiFeSiB layers were used to substitute for the traditionally used CoFe and/or NiFe layers with the emphasis being given to obtaining an understanding of the effect of the amorphous free layer on the switching characteristics of the MTJs. $Ni_{16}Fe_{62}Si_{8}B_{14}$ has a lower saturation magnetization ($M_{s}:\;800\;emu/cm^{3}$) than $Co_{90}Fe_{10}$ and a higher anisotropy constant ($K_{u}:\;2700\;erg/cm^{3}$) than $Ni_{80}Fe_{20}$. The $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(in\;nanometers)$structure was found to be beneficial for the switching characteristics of the MTJ, leading to a reduction in the coercivity ($H_{c}$) and an increase in the sensitivity resulted from its lower saturation magnetization and higher uniaxial anisotropy. Furthermore, by inserting a very thin CoFe layer at the tunnel barrier/NiFeSiB interface, the TMR ratio and switching squareness were improved more with the increase of NiFeSiB layer thickness up to 11 nm.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.427-438
• /
• 2004

Cosmeceuticals products we not the products simply for moisturizing and protecting skin but the ones for encouraging to make improvements on wrinkles and helping to whiten, tan, and protect skin against ultraviolet light. In a broader sense, they refer to products with aiming to maintain healthy condition of skin such that skin troubles could be improved or aging of skin could be delayed. However, cosmeceuticals should not have any side effects because they are applied to the whole body for a long period of time differing from medical products which are used on specific areas for a short time. The number of such cosmeceuticals has increased from 500 in 2001 to 2300 in 2003. In order to develop and broaden the scope of cosmeceuticals, the concept of cosmetics needs to be changed from caring skin to delaying aging of the skin and reviving cells. For this purpose, high-valued materials should be developed through basic researches related to the biological function of skin, in vivo experiment and reaction of skin in response to various stimuli using biotechnologies and bioengineering methods. At the same time, it should be proceeded to develop new nano materials for overcoming skin barriers and transfer matericals for helping to absorb effective substances and maintaining stability.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.3
• /
• pp.223-230
• /
• 2017

In this study, we evaluated the skin moisturizing effect of Brasenia schreberi (B. schreberi) mucilage polysaccharide on human skin and in vitro and the potent cosmetic ingredient for skin. To protect skin from various environmental stresses and aging, we should increase moisture content of skin and prevent water loss. We have found that polysaccharides extracted from mucilage of B. schreberi improved the roughness of skin with its lubricating behavior. In vitro, the expression of transglutaminase 1 (TGM1) gene, which plays a role in cross-linking the skin barrier, was increased when the keratinocytes were treated with B. schreberi polysaccharides. In addition, the expression of hyaluronan synthase 3 (HAS3) gene, an enzyme that synthesizes water-binding matrix hyaluronic acid, aquaporin 3 (AQP3), which regulates the movement of water and glycerol were also increased. In addition, an experiment to evaluate its potential as a cosmetic ingredient has shown anti-inflammatory and collagen synthesis-promoting effects. As a result, the mucilaginous polysaccharide from natural products which has not existed before, showed moisturizing effect, anti-inflammation and collagen synthesis-promoting effects for skin protection and hydration.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• International Commerce and Information Review
• /
• v.18 no.1
• /
• pp.55-78
• /
• 2016

This paper discusses on Electronic Payment System between U.S.A. and Canada. In particular, I focused on ACSS compare with FedACH(Fed Automated Clearing House) to advance a research effects. Because both of them is a low-value, high-volume retail payment system which their countries represent. The ACSS(Automated Clearing Settlement System) is the system through which the vast majority of CPA payment items are cleared, through various payment streams. In 2014, ACSS system cleared approximately 6.8billion payments worth a total value of $ 44.9 trillion. While, The FedACH Network are the center of America Commerce, moving more than $40 trillion each year. That's made up of almost 23 billion electronic financial transaction, including direct deposit via ACH, social security and government benefits, electronic bill payments such as utility and mortgage payments. Thus in this article, first of all, I considered features of payment system and the types of payment items between ACSS and FedAch. Second, I analyzed the status of central bank and legal background. Third, I focused on the operational policy and risk aversion policy. Lastly, I suggested that their payment and banking system have to assume, with good reason, more efficiently accurately and securely operation to protect their customer from credit risk and financial fraud.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.467-472
• /
• 2019

Growing smartphone usage in South Korea has also accelerated the pace of development of mobile games, but competition is intensifying as the market grows. As one of the factors for the success of the game in this mobile game market, UI has been presented, suggesting that the design of such mobile game UI should be approached in terms of designing the user's experience, along with its function, aesthetic expression, function-oriented design and information delivery before. In this paper, we propose an effective lobby layout of mobile RPG using experience among UX factors. Through the layout classification of Ernest Adams and Andrew Rollings, we selected 9 mobile RPGs in the 20th place of google play cumulative sales rankings and analyzed the layout of the lobby. As a result, the lobby layout of the game, which led the first market success of the mobile RPG genre, The result was that it became the standard of the boxed game. It can be interpreted that the lobby layout, which is similar to the game used previously by the user, is effective because low entry barriers and learning are unnecessary due to the experience of using the existing RPG. Future studies may produce a common layout of a broad genre if studies are conducted to measure the optimum UX for other genres than RPG.