• 해운
• /
• no.4 s.27
• /
• pp.10-18
• /
• 2006

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1100-1102
• /
• 2017

본 연구는 양손이 불편하거나 없는 상지장애인이 도어락의 잠금 해제를 할 수 있도록 화자 인식 기술을 이용한 도어락을 구현하였다. 현재까지 대부분의 도어락 기술은 일반인 대상으로 개발되어 생체인식 기술을 활용하는 단계까지 발전하였으나 기본적으로는 사람이 가장 잘 사용하는 신체 부위인 손을 기준으로 발달되어 손의 활용이 필요한 방식으로 양손이 불편한 상지 장애인의 사용에는 불편함을 주었다. 따라서 본 연구는 도어락 장금 장치에 화자인식 기술을 활용하여 상지 장애인도 이용 가능한 도어락 잠금 패키지를 제안하고, 구현한다. 일반인에서 상지 장애인도 사용할 수 있도록 화자 인식 기술을 이용하여 보다 보편적으로 사용 가능한 도어락 시스템을 설계하는데 기여할 수 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.20 no.1
• /
• pp.33-49
• /
• 1982

This study was undertaken to observe the porcelain porosity exerted by the contamination of the alloy and liquid. The alloy used in this study was Jelstar; liquids were Ceramco Sta-Wet liquid, distilled water and tap water; and Ceramco vacuum porcelain powder was used. The measurements with photomicroscope (x200, Olympus) were made on the porosity, the diameter (mm) of the pores and the numbers of the pores ($No/mm^2$) The results of this study were obtained as follows: 1. In the porosity, the opaque layer contained over 70% of the total porosity, and the porosity was increased about twice in every porcelain layer by the tap water. 2. The contamination of the alloy and liquid caused porosity to increase markedly at the interface of the metal-porcelain. 3. The diameter of the pores were increased about 1.5 times larger by the contaimination of the liquid, and only a slight increase in the opaque layer due to the contamination of the alloy. 4. In the numbers of the pores, there were significant differences according to the contamination of the alloy and the porcelain layer. And the contamination of the liquid caused significant differences only in the opaque layer.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1729-1731
• /
• 2015

스마트 디바이스의 고성능화 초소형화로 사용자의 편리 증대를 위한 다양한 응용 연구가 진행되고 있다. 이러한 응용 연구의 주된 목적은 편리함 및 다양한 서비스 측면을 고려하고 보안 연구는 도외시되고 있어 이와 관련된 개인정보 유출 문제가 발생되고 있다. 이러한 이유로 스마트 디바이스의 다양한 장금 기법이 개발되었지만 주로 사용되는 잠금 기법의 대부분은 사용자가 Key로 사용되는 패스워드를 직접 입력하는 과정을 거쳐야 한다. 이 과정에서 Key가 타인에게 노출될 수 있으며 이는 가장 많이 사용되는 해킹 수법 가운데 하나이다. 본 논문은 스마트 디바이스의 가속도 센서를 활용한 잠금 기법으로 잠금을 해제하는 일련의 추가적인 과정이 없도록 사용자가 디바이스를 손에 쥐고 들어올리는 과정을 Key로 사용하는 TTU(Take To Unlock)를 제시한다. 타인이 보기에 디바이스의 잠금 여부를 추측하지 못하도록 자연스러운 잠금을 제공하는 것이 TTU의 목적이며 동시에 사용자가 Key를 입력해야 하는 추가적인 행위를 최소화 한다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.3
• /
• pp.181-196
• /
• 1991

The Purpose of this study was to evaluate the marginal fit of ceramo-metal crown according to the different ceramo-metal alloy types and the curvature of labio-cervical margin. Degudent $G^{(R)}$ as precious and $Verabond^{(R)}$ as non-precious ceramo-metal alloy were used. The abutment was preparaed with two different curvature types : a normal curvature type and a pronounced curvature type. 20 crowns were farbricated using four different combinations and their marginal fits were measured at 3 consecutive stages (before degassing, after degassing, after glazing) using microscope under 200 magnification. The results were as follows: 1 . Marginal fitness before degassing. The groups of precious ceramo-metal exhibited better marginal fit than the groups of non-precious ceramo-metal with significant difference(P<0.05) . In the same ceramo-metal groups, the normal curvature group exhibited better marginal fit than the pronounced curvature group but without significant difference(P>0.05). 2. Marginal fitness after degassing. By degassing, the group of pronounced curvature and non-precious ceramo-metal was deformed the most, and the degree of margin fitness of each group was the same as before degassing. 3. Marginal fitness after glazing The group of normal curvature and precious ceramo-metal exhibited better marginal fit than the group of pronounced curvature and non-precious ceramo-metal with significant difference(P>0.05), and the degree of margin fitness of each group was the same as before degassing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.144-164
• /
• 1997

The purpose of this study were to investigate the chemical composition, mean particle size, linear thermal expansion coefficient and metal-bonding strength of the regular opaque powder and core powder. In this study, 4 types of ceramic powders, namely Duceram Jacket Opaque powder, Duceram Opaque powder, Vita Hi-Ceram powder, Vita VMK Paint On-88 powder were used. Chemical composition was evaluated by EDS(Energy Dispersive X-ray Spectrophotometer, Oxford QX-2000, England), particle size was measured by MALVERN Instruments(MALVERN Instruments SB. OC., U.S.A.. ad linear thermal expansion coefficient was measured by dilatometer(Motoyama, Japan). Bond strength was measured by the Universal tsting machine(Istron Co., Ltd., U.S.A.). The Results were as follows : 1. Through recognition of the relative difference in chemical composition between the core powder and the regular opaque powder, the difference in the proportion of $Al_2O_3$ in each type of material is demonstrated ; Duceram Jaket Opaque powder : 30.16%, Duceram Opaque powder : 16.60%, Vita Hi-Ceram : 63.64%, Vita VMK Paint-On 88 : 16.16%. 2. There was no significant difference in the proportion of metal-bonding materials between the core powder and the regular opaque powder. 3. In the regular opaque powder, alkaline materials were incoporated in order to increase the coefficient of thermal expansion. 4. In the particle size analysis, there was no significant difference in mean particle size or in the particle size distribution between the core powder and the regular opaque powder. 5. In the thermal expansion test for temperature range of $25-600^{\circ}C$, the regular opaque powder had higher coefficient of thermal expansion than that of core powder. 6. In the 4 point flexural bending test, there was no statistically significant difference in the mean bond strength between the core powder and the opaque powder among the Duceram products.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.447-453
• /
• 1985

The effects of preheating and calcium chloride on prevention of tissue softening was examined during fermentation and storage of radish root kimchi. In order to find the optimum condition of preheating treatment, activities of pectinesterase (PE) and polygalacturonase (PG) in radish root were measured with respect to $CaCl_2$ concentration and temperature. A maximum firmness was obtained with treatment in 0.05M $CaCl_2$ at $55^{\circ}C$ for 2hr which was optimum conditions for PE activity, while PG was inhibited at the $CaCl_2$ concentration of 0.05M. Firmness of radish root kimchi prepared by preheating treatment was decreased little during fermentation and storage for 25 days.

• Geophysics and Geophysical Exploration
• /
• v.1 no.2
• /
• pp.110-115
• /
• 1998

Self-potential, VLF-EM and dipole-dipole resistivity methods have been widely used for exploration of conductive sulfide ore deposit, because of the convenience and low cost of field work and the reliability of their results. The geophysical responses for vein-type sulfide outcrop of Changkoom mine located in Bukwi-Myon, Jinan-Gun, Chollabuk-Do were investigated and compared with its drilling results. The geology around the survey area is composed of acidic volcanics and sediments of Yuchon Group. And sulfides bearing pyrite, pyrrotite, galena etc. are deposited in disseminated or vein type within acidic volcanics. Typical geophysical responses were detected from the above vein type ore body, respectively. From the shape and extent of S.P. anomaly, ore body is dipping westward and extending about 50 m. It is detected that the VLF EM response matching the outline of ore zone is considered as indication of dyke dipping westward. And also resistivity response indicating conductive dipping dyke is detected. From drilling results for outcrop and geophysical anomalies, the shape of ore body is vein type dipping about $70^{\circ}W$ and extending about 50 m.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2
• /
• pp.347-354
• /
• 2000

This paper presents the efficient mechanisms for concurrency control and writing authority control in collaborative writing system are represented by the tree structures which consist of the logical objects and the content objects connected to the terminal objects of trees. For concurrency control, we adopted the approach to extend the multiple-granularity-locking-scheme. This scheme allows us to lock any objects at each level of the hierarchy. We also defined the locking compatibility table by analysing the operations applicable to any objects at each level of the hierarchy. We finally suggest the extended-multiple-granularity-locking mechanism which uses the locking compatibilility table for deciding to lock an object. This scheme gives the benefit to maximize the possibility of concurrent accessing to the shared objects. In addition, we suggest a mechanism for writing authority control which prohibits the Non-Group users from modifying the shared objects based on the concept of Group/Non-Group The proposed mechanism allows us to protect copyright very reasonably.