• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.56-60
• /
• 2009

In this paper, a novel voltage controlled oscillator (VCO) has been presented by using the microstrip square multiple spiral resonator for reducing the phase noise of VCO. The microstrip multiple square resonator has the large coupling coefficient value, which makes a high Q value, and has reduced phase noise of VCO. The VCO with 1.8 V power supply has phase noise of -115.0~-117.34 dBc/Hz @100 kHz in the tuning range, 8.935~9.4 GHz. When it has been compared with microstrip square multiple spiral resonator and coventional spiral resonator, the reduced Q value has been -32.7 dB and -57.6 dB respectively. This low phase noise VCO could ve available to a VCO in X-band.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.351-355
• /
• 1996

유연한 보의 진동문제에 대해 Filtered-X LMS 알고리즘을 이용하여 제어계를 구성하고 디지탈 신호처리보드를 이용하 여 실시간 제어를 수행하였다. 제어 엑추에이터로는 피에조 세라믹을 사용하였고 정현파 및 백색잡음 형태의 외력으 로 Shaker를 이용하여 보를 가진하였다. 백색잡음가진 실험결과 1차 고유진동수에서 14dB의 진동저감을 할 수 있었 으며 관심 주파수영역내에서진동이 고르게 저감되었다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1292-1293
• /
• 2015

기존에는 전동기 제어기법으로 PI제어기가 주로 사용되어 왔다. 그러나 실제 시스템의 경우 외란과 센서 잡음에 노출되기 쉽고, 모델의 불확실성에 대한 오차가 발생하기 때문에 보다 강인한 제어기법이 필요한 시점이다. $H{\infty}$제어기법은 명령 추종 성능, 시스템 모델 오차와 외란, 센서 잡음에 대해 강인성을 보장하는 고급제어기법으로서 현재 그 성능을 입증 받아 산업분야에서 다양하게 적용되고 있다. 본 논문은 매입형 영구자석 동기전동기(IPMSM)의 속도제어기에 $H{\infty}$제어기와 PI제어기를 적용하여 모의실험을 통한 성능비교를 통해 모델오차와 같은 시스템의 불확실성과 외란에 대해 $H{\infty}$제어기의 강인한 제어성능을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.202-207
• /
• 2010

In this paper, a novel voltage-controlled oscillator(VCO) using the open loop multiple split ring resonator(OLMSRR) is presented for improving the phase noise, implemented in 130 nm CMOS technology. Compared with the conventional CMOS LC resonator, the proposed CMOS OLMSRR has the larger coupling coefficient value, which makes a higher Q-factor, and has improved the phase noise of the VCO. The proposed CMOS VCO based OLMSRR has the phase noise of -99.67 dBc/Hz @ 1 MHz in the oscillation frequency. Compared with the VCO using the conventional CMOS LC resonator and the proposed VCO using the CMOS OLMSRR structure has been improved in 7 dB. The prototype 24 GHz CMOS VCO is implemented in 130 nm CMOS and occupies a compact die area of $0.7\;mm{\times}0.9\;mm$.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.4
• /
• pp.72-78
• /
• 2009

This paper proposes a low phase noise ring voltage controlled oscillator(VCO) with a standard $0.13{\mu}m$ CMOS process for PLL circuit using the VCO-gain-controlled Delay cell. The proposed Delay cell architecture with a active resistor using a MOS transistor. This method can reduced a VCO gain so that improve phase noise. And, Delay cell consist of Wide-Swing Cascode current mirror, Positive Latch and Symmetric load for low phase noise. The measurement results demonstrate that the phase noise is -119dBc/Hz at 1MHz offset from 1.9GHz. The VCO gain and power dissipation are 440MHz/V and 9mW, respectively.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1294-1295
• /
• 2015

BLDC 모터는 고효율, 비 관성에 의한 큰 토크, 제어의 단순성과 같은 뚜렷한 장점들 때문에 일반적으로 로봇공학 및 항공 우주, 자동차 같은 응용 분야에 널리 사용된다. 따라서 사용자가 원하는 속도를 일정하게 유지하는 것은 중요하다. BLDC 모터는 무게 변화와 같은 파라미터 변화나 센서 잡음, 외부환경 변화에 따른 외란의 영향이 항상 존재하게 된다. 하지만 일반적인 제어기 설계방법으로는 파라미터 변화, 센서 잡음이나 외란의 영향에 효과적으로 대응하는 것이 쉽지 않다. 본 논문에서는 강인 제어 기법 중 하나인 H-infinity 제어기법을 BLDC 모터에 적용하여 속도제어기를 설계하였다. 또한 DSP 구현을 통하여 일반적으로 널리 사용되는 PI 제어기와의 비교를 통해 H-infinity 속도 제어기의 우수성을 보였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.150-156
• /
• 2007

Noise is generated by several causes, when signal is processed. Hence, it generates error in the process of data transmission and decreases recognition ratio of image and speech data. Therefore, after eliminating those noises, a variety of methods for reconstructing the signal have been researched. Recently, wavelet transform which has time-frequency localization and is possible for multiresolution analysis is applied to many fields of technology. Then threshold-and correlation-based methods are proposed for removing noise. But, conventional methods accept a lot of noise as an edge and are impossible to remove the additive white Gaussian noise (AWGN) and the impulse noise at the same time. Therefore, in this paper we proposed new wavelet-based algorithm for reconstructing degraded signal by noise and compared it with conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.777-786
• /
• 2003

The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed phase noise model in this paper more accurately predicts the phase noise spectrum of frequency synthesizer. To accurately model the phase noise contribution of noise sources in frequency synthesizer, the phase noise sources were analyzed via modeling of the frequency divider and phase noise components using Leeson model for reference signal source and VCO. The phase noise transfer functions to VCO from noise sources were analyzed by superposition theory and linear operation of phase-locked loop. To evaluate the phase noise prediction model, the frequency synthesizers were fabricated and were evaluated by measured data and prediction data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1926-1933
• /
• 2022

Parameterized multichannel Wiener filter (PMWF) is a linear filter that can control the trade-off between residual noise and signal distortion using the embedded parameter. To apply the PMWF to noisy inputs, accurate noise estimation is important and multichannel minima-controlled recursive averaging (MMCRA) is widely used. However, in the case of the MMCRA, the accuracy of noise estimation decreases when a directional interference is involved into the array inputs. Consequently, the performance of the PMWF is degraded. Therefore, we propose a noise power spectral density (PSD) estimation method for the PMWF in this paper. The proposed method is based on a consecutive process of eigenvalue decomposition on noisy input PSD, estimation of the target component contribution using directional information, and exponential weighting for improved estimation of the target contribution. For evaluation, four objective measures were compared with the MMCRA and we verify that the PMWF with the proposed noise estimation method can improve performance in environments where directional interfereces exist.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.699-702
• /
• 2012

본 논문에서는 WCDMA(Wide Code Division Multiple Access) 시스템 사양을 만족시키는 주파수 합성기 블록 중 위상잡음 및 전력소모의 최적 설계가 필요한 LC-VCO(voltage controlled oscillator)의 설계를 제안 하였다. 최적 설계를 위한 핵심내용은 LC-tank의 손실성분을 보상하는 MOS트랜지스터의 전달컨덕턴스와 인덕턴스 평면에 여유이득라인과 튜닝 범위 라인을 그어 설계 가능한 영역 내에서 위상잡음이 최소가 되는 인덕턴스 값을 구하고 선택하는 것이다. 제안한 최적 설계방법에 의해 진행된 LC-VCO의 시뮬레이션 결과 위상잡음 특성은 1MHz옵셋에서 -113dBc/Hz였다.