• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.248-256
• /
• 2008

The study aims at verifying no generation of electrical power induced noise voltage on telecommunications lineside cable by analyzing the practical findings of noise voltage produced at the telecommunication lines in the vicinity of electrified high-speed railways like KTX, while proposing to make the current standard measurement circuit along with its measuring conditions revised in compliance with international ITU-T recommendations by identifiably finding out the present problems in balance level measuring instruments as well as their errors in the measurement method now applicable by local telecommunications companies and the Radio Research Laboratory.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.86-92
• /
• 2001

Various array processing techniques to identify the noise source position or bearing have been developed. Typical array processing techniques which are based on time delay between received signals at two sensors, are classified as conventional beamforming, correlation function and NAH (Near-Field Acoustic Holography) techniques which have their own characteristics with respect to application field and signal processing method. In this study, correlation function technique which could be applied for broadband noise source detection, is adopted and the effective detection technique is proposed considering the effects of source bandwidth and measurement noise correlation of noise sources. The validity of the Proposed technique is evaluated using the 3-dimensional nonlinear any which does not give 3-dimensional Position or bearing ambiguity

• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.112-123
• /
• 2005

자기지전류 탐사의 적용에 있어 인공잡음의 영향은 탐사의 승패를 좌우하는 중요한 요소이며 인공잡음의 영향을 최소화할 수 있는 탐사의 설계와 자료처리가 요구되고 있다. 본 연구에서는 수치공간자료를 이용한 공간모델링을 통해 MT 주파수 대역에서의 잡음을 예측하고 실제 탐사 자료와 비교분석하여 MT 잡음 모델링을 가능성을 살펴보았다. 수치지도로부터 추출된 잡음원일 가능성이 높은 건물, 도로, 고압 송전선에 의해 발생하는 전자기장의 강도를 지하매질의 전기전도도에 따른 전자기파의 전파 특성을 고려하여 예측하는 잡음모델을 제안하였다. 제안된 잡음모델로부터 예측된 잡음 파워와 실제 탐사를 통해 측정된 MT 자료와의 상관도 분석을 수행한 결과, 전반적으로 전기장에서는 넓은 주파수 대역에서 높은 상관관계를 보이는 반면 자기장은 60 Hz 부근의 대역에서만 상관관계를 가진다. 본 연구에서 제안된 공간모델링을 통한 잡음 예측은 특히 고도로 산업화되어가는 도시 주변지역에서의 MT 탐사를 수행하는데 있어 유용한 정보를 제공할 수 있을 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.241-248
• /
• 1998

The accurate measurement of the room sound level is required in environment noise control. However, it has been found that the measurement system noise always corrupts the actual noise from the sound source. In this study, a new sound level measurement technique in which the system noise is eliminated from the measured signal by the cross spectrum method, is proposed. The received signals of two measuring microphones are recorded to DAT through the pre-amplifier and digitized by A/D converter. The cross spectrum calculated from the digitized signals gives the accurate sound level since the system noise is uncorrelated with the sound source noise which we want to measure. The performance of the proposed technique is verified experimentally to be effective and the technique is found to be economic since the low cost general purpose microphone could be used in this technique.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.376-381
• /
• 2009

The image data compression, recognition, restoration, etc. are parts of the digital image processing technology. In the process by various devices, noises would be made. Because the noise could damage the image, we use the image filter to preserve the original image from the noise. The image filter used in digital image process basically has a two-dimensional structure. There an two methods of creating the filter - One is reiterating one dimension and the other is using an indivisible two-dimension image filter. The image filter is being widely used along with one-dimension filter according to each noise, and various median filters are being used to remove the impulse noise. In this paper, I suggested a powerful modified median filter, and compared with conventional filters for objective verification.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1990.06a
• /
• pp.745-748
• /
• 1990

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1272-1280
• /
• 2008

In this paper, we have proposed a phase noise model of fast frequency hopping synthesizer with DDS Driven PLL architecture. To accurately model the phase noise contribution of noise sources in frequency hopping synthesizer, they were investigated using model of digital divider for PLL, DAC for DDS and Leeson's model for reference oscillator and VCO. Especially it was proposed that the noise component of low pass filter was considered together with the phase noise of VCO. Under assuming linear operation of a phase locked loop, the phase noise transfer functions from noise sources to the output of synthesizer was analyzed by superposition theory. The proposed phase noise prediction model was evaluated and its results were compared with measured data.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.4-7
• /
• 2022

기존 합성곱 신경망 기반의 잡음 제거 네트워크들은 학습을 위한 noisy-clean 데이터 쌍을 필요로 한다. 하지만 실제 카메라 잡음의 경우, 잡음에 대한 깨끗한 원본 영상을 얻는 것은 불가능하거나 많은 비용이 소모된다. 따라서 이러한 방법을 해결하기 위하여 원본 영상 없이 잡음 영상만으로만 잡음 제거 네트워크를 학습하는 방법들이 제안되어왔다. 그 중 카메라 잡음 영상을 처리하기 위한 대표적인 방법으로 학습과 추론에서 비대칭적인 downsampling을 사용하는 AP-BSN이 제안되었다. 본 논문에서는 Functional neural network를 AP-BSN 알고리즘에 적용하여 다양한 downsampling ratio에 대응되는 하나의 네트워크를 학습하였다. 이를 통해 기존 hyperparameter로 사용되던 downsampling ratio에 대한 결과를 하나의 네트워크에서 분석 및 확인하였다. 또한 해당 파라미터를 조절함으로써 다양한 잡음 제거 후보들을 추출하고 사용자가 원하는 잡음 제거 정도를 조정할 수 있도록 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1383-1388
• /
• 2016

Although image signal processing is used in many fields, degradation takes place in the process of transmitting image data by several causes. CWMF, A-TMF, and AWMF are the typical methods to eliminate noises from image data damaged under salt and pepper noise environment. However, those filters are not effective for noise rejection under highly dense noise environment. In this respect, the present study proposed an algorithm to remove in salt and pepper noise. In case the center pixel is determined to be non-noise, it is replaced with original pixel. In case the center pixel is noise, it segments local mask into 4 directions and uses linear interpolation to estimate original pixel. And then it applies spatial weight to the estimated pixel. The proposed algorithm shows a high PSNR of 24.56[dB] for House images that had been damaged of salt and pepper noise(P = 50%), compared to the existing CWMF, A-TMF and AWMF there were improvements by 16.46[dB], 12.28[dB], and 12.32[dB], respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8C
• /
• pp.788-794
• /
• 2003

It is very important to construct statistical model in order to exactly estimate the signal variance from the noisy image. By using estimated variance of original image, in general, Wiener filter is constructed, and it is applied to the noisy image. In this paper, we propose a new statistical mixture modeling of wavelet coefficients for image denoising. Firstly, a simple classification method is used to construct a significance map that captures significant property of wavelet coefficients. Based upon the significance map, the state probabilities of mixture model is computed, and signal variance is estimated by using them. Experimental results show that the proposed method yields 0.1-0.2㏈ higher PSNR than conventional methods for image denoising.