• Korean Journal of Veterinary Service
• /
• v.26 no.3
• /
• pp.199-202
• /
• 2003

Solid phase extraction(SPE) and matrix solid phase dispersion(MSPD) have been studied as preparation procedures for tetracyclines analysis by high-performance liquid chromatography(HPLC) in meat. The recovery range was 74${\sim}$98% for SPE, and 72${\sim}$93% for MSPD at spiked levels of 100ng/g for oxytetracycline(OTC), tetracycline(TC), chlortetracycline(CTC), and doxycycline(DC). The detection limits were 15${\sim}$78ng/g for SPE and 25${\sim}$84ng/g for MSPD, respectively. Analytical method was HPLC with UV detector. The purpose of this study was developing a practical, accurate and precise method for rapid extraction and quantitation of tetracycline residues in meat.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.286-286
• /
• 2011

현재의 NEDO (New Energy and industrial technology Development Organization) style Si 정련은 두 단계로 구분되어 있다. 고출력 집속 전자빔을 이용한 금속 실리콘의 1차 용융과 대기압 근처의 플라즈마 아크 용해를 이용해서 B, P를 약간의 반응성 가스를 첨가 하여 제거하는 방법이다. 그러나 저가형 실리콘을 생산하려는 취지와 달리 두 가지의 고가 장비가 필요하다. E-beam melting 장치에서도 반응성이 높은 라디칼을 생성할 수 있다면 하나의 장비에서 두 가지의 정련 작업을 진행시킬 수 있다. 본 연구에서는 고진공에서(< 10-4 Torr) 동작하는 E-beam의 성능에 전혀 영향을 주지 않으면서 플라즈마를 용이하게 생성 시킬 수 있는 방법을 개발하고 이를 적용하여 실제 금속 순도 실리콘 내에 존재하는 B, P가 제거되는지 확인하는 것을 연구 내용으로 한다. 본 연구는 MG (Metal Grade) - Si 을 플라즈마 보조 전자빔 정련을 이용하여 정련한 Si 의 불순물 함량의 개선 효과를 조사하는 것이다. MG-Si 의 정련 방법 중에서 고출력 집속 전자빔을 이용하여 휘발성 오염물질을 제거 후, 플라즈마 아크 용해를 이용해서 B 를 제거하는 방법을 접목시켰다. MG-Si 에 DC power 와 전자빔을 집속시켜서 정련을 하면 챔버 내의 잔류 수증기가 플라즈마에 의해 분해되어 O를 생성하고, B와 반응을 하여 BO 형태로 제거가 된다. 방전 전압 700 V 와 전자빔 가속 전압이 4.5 kV, 방출 전류는 11 A, 진공 챔버 내의 압력은 $7.2{\times}10^{-4}$ Torr에서 정련을 진행하여 B를 제거했다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.1
• /
• pp.24-28
• /
• 2009

In this study, we investigated whether the anhysteretic demagnetization process would be applicable to remove a complicated magnetization of a steel tube as a part of the experimental earlier study for a deperming of naval vessel. The magnetic tube used in this study was a 10cm-long and 1cm-diameter steel tube, and magnetized with a E-shape ferrite core to form a nonuniform magnetization in it. In the anhysteretic demagnetization process, a dc magnetic field applied along the longitudinal direction of the tube decreased from ${\pm}$3kA/m to zero-field with the step of ${\pm}$300A/m. At the same time, an ac bias magnetic field with the frequency of 60Hz and the field intensity of 300A/m was excited along the circumstantial direction of the tube. It was found that the anhysteretic process was useful to demagnetize a small-object like a steel tube from the experimental results showing the residual magnetization reduced over 90%.

• Analytical Science and Technology
• /
• v.18 no.3
• /
• pp.250-256
• /
• 2005

A selective method of high performance liquid chromatography with UV detector has been applied to determine 4 tetracycline antibiotics in the animal food, simultaneously. The targets were chlortetracycline (CTC), doxycycline (DC), oxytetracycline (OTC), and tetracycline (TC) that are used routinely in veterinary medicine for prevention and control of disease. Food samples were beef, pork, chicken, milk, whole egg, flatfish (Limanda yokohamae), jacopever (Sebastes hubbsi), seabream (Chrysophrys major), eel (Anguilla japonica) and lobster (Hommarus americanus). After extracting food samples with 20% trichloroacetic acid and McIlvaine buffer, they were purified by a $C_18$ SPE cartridge with 0.01M methanolic oxalic acid solution. The concentrated residue was re-dissolved in methanol, filtered, cleaned up and analyzed on a $C_18$ column. The mobile phase was a mixture of 0.01M oxalic acid and acetonitrile with a gradient ratio from 85:15 to 60:40. The UV wavelength was 365 nm. The overall recoveries were ranged from 71% to 98% and the limit of detections were 0.022 for CTC, 0.012 for DC and OTC and 0.009 mg/kg for TC at signal/noise > 3, respectively. As results, CTC, DC and TC were not detected in all selected food samples, however, OTC was detected in meat and fishes. The determined level of OTC was 0.04 ppm for pork, 0.17 ppm for flatfish and 0.05 and 0.08 ppm for jacopever, that were within the Maximum Residue Limits (MRLs) in the food.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.928-934
• /
• 2002

Gallium doped Zinc Oxide(GZO) films were deposited by dc magnetron sputtering using a GZO ceramic target at various conditions such as substrate temperature (RT, 400), residual water pressure ($P_{H_2O}$; 1.61${\times}10^{-4}∼2.2{\times}10^{-3}$ Pa), introduction of $H_2$ gas (8.5%) and different magnetic field strengths(250, 1000G). GZO films deposited without substrate heating showed clear degradation in film crystallinity and electrical properties with increasing $P_{H_2O}$. The resistivity increased from 3.0${\times}10^{-3}$ to 3.1${\times}10^{-2}{\Omega}㎝$ and the grain size of the films decreased from 24 to 3 nm when PH2O was increased from 1.61${\times}10^{-4}$ to 2.2${\times}10^{-3}$ Pa. However, degradation in electrical properties with increasing $P_{H_2O}$ was not observed for the films deposited with introduction of 8.5% $H_2$. When magnetic field strength of the cathode increased from 250G to 1000G, crystallinity and electrical properties of GZO films improved remarkably about all the $P_{H_2O}$. This result could be attributed to the decrease in film damage caused by the decrease in plasma impedance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.164-171
• /
• 2007

This experiment was conducted to investigate heavy metal speciation and bioavailability from soil to the edible parts of water dropwort near industrial complex. The soils and water dropwort were collected from the paddies cultivating water dropwort(10 sites), stream sediments(5 sites), and background soils(3 sites) near industrial complex. The total concentrations of Cd Cu, and Ni were higher than those of permissible level for soil contamination(Cd 3, Cu 100, Ni $50mg\;kg^{-1}$ in soil) suggested by Kloke(1979). Dominant chemical forms of Cd in paddies cultivating water dropwort and stream sediments were exchangeable form(49.1-56.3%), and those of Cu, Zn, and Ni were Fe and Mn oxide bound and residual forms. The mobility factor of heavy metals in paddies cultivating water dropwort and stream sediments was in the order Cd>Zn>Ni>Cu>Pb, specially, the mobility factor of Cd (62-72%) were relatively higher than that of other metals in soils. The total concentrations of Cd in soils showed significant positive correlation with the ratios of exchangeable and Fe and Mn oxide bound forms, while correlated negatively with residual form. Heavy metal contents in root parts were higher than those in top parts of water dropwort. The bioavailability of water dropwort varied considerably between the different parts and heavy metals. Cd, Cu and Ni contents in water dropwort were correlated with each fractions in soils. Specially, the exchangeable form of Cd and Ni in soils showed significant positive correlation with the those contents of water dropwort.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.601-606
• /
• 2000

Nickel mono-silicide(NiSi) shows no increase of resistivity as the line width decreases below 0.15$\mu\textrm{m}$. Furthermore, thin silicide can be made easily and restrain the redistribution of dopants, because NiSi in created through the reaction of one nickel atom and one silicon atom. Therefore, we investigated the deposition condition of Ni films, heat treatment condition and basic properties of NiSi films which are expected to be employed for sub-0.15$\mu\textrm{m}$ class devices. The nickel silicide film was deposited on the Si wafer by using a dc-magnetron sputter, then annealed at the temperature range of $150~1000^{\circ}C$. Surface roughness of each specimen was measured by using a SPM (scanning probe microscope). Microstructure and qualitative composition analysis were executed by a TEM-EDS(transmission electron microscope-energy dispersive x-ray spectroscope). Electrical properties of the materials at each annealing temperature were measured by a four-point probe. As the results of our study, we may conclude that; 1. SPM can be employed as a non-destructive process to monitor NiSi/NiSi$_2$ transformation. 2. For annealing temperature over $800^{\circ}C$, oxygen pressure $Po_2$ should be kept below $1.5{\times}10^{-11}torr$ to avoid oxidation of residual Ni. 3. NiSi to $NiSi_2$ transformation temperature in our study was $700^{\circ}C$ from the four-point probe measurement.

• Polymer(Korea)
• /
• v.33 no.5
• /
• pp.496-500
• /
• 2009

Optically compensated bend liquid crystal display (OCB-LCD) has many application fields owing to its fast response time and wide viewing angle. However, in order to operate the OCB-LCD in bend state, this device needs quick transitions from the initial splay state to bend state. Unlike conventional approach using transient high voltage for the transition, the OCB-LCD with high surface tilt angle, which was achieved by polymerization of UV curable reactive mesogen monomer under certain voltage, was manufactured and the cell showed bend state initially. Electro-optic and electrical characteristics of the cell were analyzed. The cell shows a fast response time owing to high surface pretilt angle and very low residual DC less than 0.1 V although another polymer layer is formed above polymer alignment layers.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.104-109
• /
• 1983

Gas chromatographic method for the analysis of phorate(0,0-diethyl S-ethyl-thiomethyl phosphorithioate) and its metabolites in soil and vegetables was studied by using a mixed phase column(10% DC-200+8% Reoplex-400+2% QF-1 on Gas Chrom Q, $1.8{\times}2mm$ i.d, borosilicate glass column). This column can separate completely phorate and its four metabolites except phoratoxon sulfoxide. Retention time of standard mixture ranged 1.8 to 16.1 minutes at column temperature programming from 130 to $200^{\circ}C$ at $5^{\circ}C/min$ and detector sensitivity was also very high(0.05 to 1.05ng). Recoveries from soil and vegetables untreated but fortified with phorate and its three major metabolites at 0.05 and 0.5ppm levels were above 90% for phorate, phorate sulfoxide and phorate sulfone while recovery of phoratoxon metabolite was about 84%.

• Journal of the Korean Magnetics Society
• /
• v.4 no.3
• /
• pp.219-225
• /
• 1994

The alignment of Sr-ferrite magnetic powders, which is usually related to the fluidity and the applied magnetic field, is investicated in the anisotropic Sr-ferrite / resin-bonded permanent magnets. The magnetic powder alignment is observed to increase with the applied magnetic field and the fluidity which is a function of molding temperature and powder packing ratio. The best magnetic powder alignment is achieved at the following conditions; Sr-ferrite packing ratio of 56vol%, apparent viscosity of about 3000 poise in $1000sec^{-1}$ shear rate, and applied magnetic field of about 5kOe. The degree of preferred orientation of the magnetic powders in the field direction, as determined by the dc hysterisis graphs, is 84~85% (0.84~0.85). This result is in agreement with the value of 0.85 obtained by the X-ray experiments in the $2{\theta}$ range of ${23~40}^0$. The best magnetic properties obtained are:2.2kG of remanent flux density, 2.2MGOe of maximum energy product.