• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1452-1460
• /
• 2001

A new method of parameter determination in the fatigue residual strength degradation model is proposed. The new method and minimization technique is compared experimentally to account for the effect of tension-compression fatigue loading of spheroidal graphite cast iron and graphite/epoxy laminate. It is shown that the correlation between the experimental results and the theoretical prediction on the fatigue life and residual strength distribution using the proposed method is very reasonable. Therefore, the proposed method is more adjustable in the determination of the parameter than minimization technique for the prediction of the fatigue characteristics.

• Korean Journal Plant Pathology
• /
• v.12 no.3
• /
• pp.307-315
• /
• 1996

토마토 잎에 집적된 triflumizole 잔류량 동태에 미치는 온도 영향과 Cladosporium fulvum에 대한 triflumizole의 살균효과를 구명하였다. 8주간 키운 토마토 식물체에 triflumizole을 분무 살포한 후 식물생장용 항온실에서 키우면서 4가지 온도 조건을 처리하였다. 주기적으로 토마토 잎을 채취하여 HPLC 방법을 이용하여 triflumizole의 잔류량을 조사하였다. Triflumizole 잔류량의 경시적 동태는 약제살포후 적산온도를 독립변수로 사용하는 지수적 감소 몸형으로 나타낼수 있었으며, 이는 triflumizole의 잔류성이 온도 영향을 크게 받는다는 것을 뜻한다. 경기도 농촌진흥원에 위치한 토마토 비닐하우스에서 수행한 실험에서 얻은 자료를 이용하여 평가한 결과 이 모형의 타당성이 인정되었다. Triflumizole의 약효에 대한 in vitro 실험 결과, 이 살균제는 C. fulvum의 균사 생장과 포자형성을 뚜렷이 억제하였으며, 잎곰팡이병 방제를 위해서는 토마토 잎에 집적된 triflumizole 잔류량이 최소한 10 ppm 이상이 되어야 할 것으로 추측된다. 본 연구에서 연구된 지수적 감소 모형은 토마토 잎에 집적된 triflumizole 잔류량을 추정하는데 활용될 수 있으며, 실용적인 측면에서 볼 때, 토마토 잎곰팡이병을 효과적으로 방제하는데 필요한 triflumizole의 최소 잔류량을 식물체에 유지하기 위하여 triflumizole을 살포해야 할 시기를 결정하는데 활용될 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1900-1907
• /
• 2012

Since the subpanels of polygonal-section shell have the corners of an obtuse angle larger than 90 degree unlike general plate or box-section structures, this could have an influence on forming nodal lines against local plate buckling or stress distributions. However, there is not sufficient material in the relevant study results or design recommendations. The very feasible models of the initial imperfections were acquired through the literature studies and then the parametric studies were conducted along with the initial imperfection models by using the finite element method. The parameters like the size of residual stresses, the portion of compressive residual stresses, and steel grades were considered. From the parametric studies, it was found that the maximum residual stress is more influential factor than the distribution pattern of residual stresses. In addition, The design strength equations for the simply supported plates can be applicable to the determination of the local buckling strength of the polygonal cross-section shell structures.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.104-110
• /
• 1997

To predict the effect of ring expansion and ring compression on residual stress relief of Al 7175 ring rot]s, 2-D axisymmetric thermal analysis and elastoplastic analysis were performed. The residual stress distributions along the thickness of T73, T7351 and T7352 treated rings were measured using three step sectioning method. The measured results were compared to numerical ones for quenched and stress relieved rings. After quenching, calculated hoop and axial residual stresses were similar to measured ones for T73 treated rings. The residual stresses of T7351 and T7352 treated rings were decreased remarkably compared to T73 treated rings. The effect of axial residual stress relief was superior to that of hoop one, and also ring compression to ring expansion. It was concluded that ring compression is advantageous over ring expansion in view of stress relief effect and practicality, and vice versa in view of dimensional control and press power.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1369-1375
• /
• 2011

Shot ball impacts to materials cause residual compressive stress on their surfaces. Improving the fatigue strength of a material that has this residual compress stress is the purpose of the shot peening process. A numerical study was performed to evaluate the effect of the strain rate sensitivity and hardness of the shot ball on the residual compressive stress. We calculated the residual compressive stress due to multiple impact shot peening using ABAQUS 6.9-1. AISI 4340 steel was the material used in this study. We compared the effects of high strain rate sensitivities and low strain rate sensitivities and found that when the material's sensitivity to the strain rate increased, the residual compressive stress decreased. In addition, the residual compressive stress of low-hardness material is higher than that of high-hardness material.

• Composites Research
• /
• v.16 no.1
• /
• pp.13-18
• /
• 2003

Prediction of composite fatigue life is not a straightforward matter, depending on various failure modes and their interactions. In this paper, a methodology is presented to predict fatigue life and residual strength of composite materials based on Phenomenological Model(non-linear fatigue damage model). It is assumed that the residual strength is a monotonically decreasing function of the number of loading cycles and applied fatigue stress ratio and the model parameters(strength degradation parameter and fatigue shape parameter) are assumed as function of fatigue life. Then S-N curve is used to extract model parameters that are required to characterize the stress levels comprising a randomly-ordered load spectrum. Different stress ratios (${\sigma}_{min}/{\;}{\sigma}_{max}$) are handled with Goodman correction approach(fatigue envelope) and the residual strength after an arbitrary load cycles is represented by two parameter weibull functions.

• Computational Structural Engineering
• /
• v.5 no.1
• /
• pp.97-108
• /
• 1992

This paper is an attempt to account for the uncertainty of the residual strength in the reliability analysis of structural systems. For this purpose the stochastic finite element method(SFEM) is linked to the system reliability analysis procedure. The stochastic finite element is known to be able to a more explicitly consider the effect of uncerainties of material and geometric variables on those of load effects in structural analysis procedure. The method has been applied to system as well as component reliability analysis of a plane structure. Comparison of the results by the present approach is made with the method in which the residual strength of failed component is treated as deterministic variable. Several case studies have been carried to show the effect of uncertainty in residual strength of a member after failure. Is has been conformed that reidual strength very much affect the system reliability level. It can be, hence, concluded that the uncertainties in the post-ultirnate behaviour may have to be taken into account in the system reliability analysis for a better a ssessment of the system reliability especially for a structure of which member behaviour is modelled as asemi-brittle model. And then the stochastic finite element method can efficiently evaluate the system reliability.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.6
• /
• pp.565-572
• /
• 2009

This work intends to establish the reliability and fracture toughness $K_{IC}$ criterion of welded joints by EGW for high strength EH36-TMCP ultra thick plate. For this, firstly thermo elasto-plastic analysis has been carried out on two pass X-groove butt joint model to clarify the thermal and mechanical behaviour(residual stress, plastic strain, magnitude of stress and their distribution and production mechanism). Moreover, to establish fracture criterion, analysis of fracture toughness $K_{IC}$ has been performed under the notch machined and residual stress with the load condition on EGW welded joints. A quantitative fracture criterion for EGW welded joints is suggested by using $K_{IC}$.

• Composites Research
• /
• v.20 no.3
• /
• pp.37-42
• /
• 2007

Tensile residual stress is occurred by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite with occurring of compressive residual stress in the matrix by its shape memory effect. A hot press method was used to create the optimal fabrication condition for a Shape Memory Alloy(SMA) composite. The bonding effect of the matrix and the reinforcement within the SMA composite by the hot press method was strengthened by cold rolling. In addition, acoustic emission technique was used to quantify the microscopic damage behavior of cold rolled TiNi/A16061 shape memory alloy composite at low temperature. The damage degree for the specimen that underwent thermal shock cycles was also discussed.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.73-85
• /
• 2002

This paper is focused on studying the undrained cyclic triaxial behavior of saturated Nak-dong River sand, using anisotropically consolidated specimens. A test of isotropically consolidated specimens was performed to compare the results of the anisotropically consolidated specimens. The cyclic shear stre3ngth of the sand under various combinations of initial static shear stress and relative density was considered. Failure was defined as a 5% double amplitude cyclic strain and a 5% residual axial strain for both reversal stress and no reversal stress conditions. Using this definition, the cyclic strength of the anisotropically consolidated specimens was affected by the initial static shear stress. For anisotropically consolidated Nak-dong River dense sand, the cyclic strength is greater than that of Toyolura silica sand but is smaller than that of Dogs Bay carbonate sand. By comparing the experimental and predictecl results, it was possible to predict the residual pore pressure of Nak-dong River sand using Hyodo's model with initial static shear stress subjected cyclic loading.