• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.576-581
• /
• 2016

해양환경에서 큰문제가 되고 있는 아주 작은 크기의 플라스틱 입자인 미세플라스틱(Microplastic)은 잔류성이 크고 생물축적성이 있는 잔류성 유기오염 물질(POP)을 잘흡착하여 해양환경과 먹이사슬에 지대한 피해를 끼친다. 본 연구에서는 해양에 존재하는 대표적인 미세플라스틱 uPVC와 입자상의 잔류성 유기오염 물질 PAH를 원형 실린더로 가정하여 해양 환경에서 침강하고 있는 미세플라스틱이 잔류성 유기오염 물질에 의해 오염될 가능성을 알아보았다 이를 위해 표층및 심층수 환경에서 반지름에 따른 충돌효율과 접촉 시간을 구하여 두 실린더가 접촉할 시간의 기댓값인 기대 접촉시간을 계산하였다.

• Journal of Food Hygiene and Safety
• /
• v.6 no.2
• /
• pp.83-87
• /
• 1991

Beef, pork and chicken on the market were analyzed for determination of tetracyclines residue and decomposition of tetracyclines by heating were studied. The content of oxytetracycline was trace in chicken A, 0.09 mg/kg in C and trace in beef C, pork A and B, but in the other samples was not detected oxytetracycline. Chlortetracycline residue was 0.14, 0.02 and 0.01 mg/kg in chicken A, C and beef B respectively. In HPLC analysis, two peaks of 8.1 and 9.0 min of retention time were found from beef and pork and expected to be component of meat, and because of same retention time, the one of 9.0 min interrupted determination of tetracycline. But those were not found in chicken, therefore the residue was 0.01 mg/kg in sample A. The residue were degradated rapidly by heating of roast, but slightly by that of boiling.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.266-268
• /
• 2011

본 논문은 폐타이어 열분해 잔류물인 char를 이용하여 수증기 활성화법으로 활성탄을 제조하였다. 활성화 온도가 증가할수록 비표면적은 증가하였으나 활성화 시간에 따른 비표면적은 3시간에서 최대를 보인 후 시간이 지속되면 비표면적은 감소하였다. 본 연구결과, 타이어열분해 잔류물 char를 이용한 활성탄 제조에 있어 최적의 실험조건은 활성화 온도 $850^{\circ}C$, 활성화 시간 3시간, 승온속도 $5^{\circ}C/min$이었으며 이 조건에서 제조한 활성탄의 비표면적은 $517.6m^2/g$으로 나타났다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1035-1040
• /
• 2015

4-Hexylresorcinol (4-HR) has been used for prevention of melanosis in shrimp. Recently, 4-HR in EU and other countries was authorized with maximum residue levels of 1~2 mg/kg but remains unauthorized in Korea. Therefore, the aim of this study was to investigate the effect of 4-HR on melanosis inhibition and residual levels in Korean shrimp according to various concentrations and soaking times. We previously reported that the HPLC-FLD method can be used for detection of 4-HR at maximum levels of 1~2 mg/kg in shrimp. Our results show that residual levels of 4-HR in peeled and unpeeled shrimps were in the range of 0.86 to 13.46 mg/kg and 0.02 to 2.33 mg/kg, respectively. In addition, 4-HR treatment at concentrations of 10 and 20 mg/L for 72 h were effective for inhibition of melanosis in peeled shrimp compared with unpeeled shrimp. These results provide basic data for the establishment of guidelines and regulation related to 4-HR.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.45-50
• /
• 2007

In this study, uptake rates of internal organs and daily urinary excretion rates were measured to get more reliable estimation results for Korean. Radioactive iodine($^{131}I$) of $100{\mu}Ci$ was administered by ingestion to 28 adult males for the experiment and then the radioactivity in thyroid gland, liver, stomach, small intestine, kidneys, and urine was measured after time intervals of 2, 4, 6 and 24 hours. Uptake rates of each organ and daily urinary excretion rates were calculated on the basis of these experimental results. As a result, uptake rates of 19.70% for thyroid and daily urinary excretion rates of 71.12%, on the average, were indicated. The maximum of uptake rates and daily urinary excretion rates were recorded after 2 hours of administration of $^{131}I$, but those rates were decreased gradually later. It was also found that uptake rates were the highest in stomach, followed by the left kidney, liver, small intestine and right kidney except for thyroid gland. In this experiment, the calculated uptake change rate in thyroid gland after 24 hours of administration of $^{131}I$ was different from that of ICRP-54/67(30%) and ICRP-78(25%). Thus, it is necessary to apply more reliable approach, reflecting the characteristic of Korean physiology and to obtain the basic data of results using this approach for calculation of the internal adsorbed dose. In the future, this approach can be helpful for the internal dose assessment of radiation workers in a nuclear power plant or in a hospital.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1000-1002
• /
• 2017

Here, the unsteady Navier-Stokes solver has been developed using implicit dual time stepping method. The implicit dual time stepping method introduced the pseudo time step for solving the new residual including the steady state residual and real time derivative. For the validation of code, Stokes 2nd problem, the laminar flow on the oscillating flat plate was selected and compare the calculating results with analytic solutions. The calculating velocity profile and skin friction has a good agreement with analytic solutions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.147-154
• /
• 2014

In this study, chlorine modeling technique based on fuzzy system is proposed to reduce the carcinogenic substance and decide the optimal chlorine injection rate, which is affected by chlorine evaporation rate in sedimentation basin according to detention time, weather and water quality. The additional chlorine meter is installed in the inlet part of sedimentation to reduce the feedback time and implement cascade control, which leads to maintaining the residual chlorine concentration decided by fuzzy rule. It helps to take a preemptive action about long time delay, the characteristics of the disinfection process, and reduce the variation of residual chlorine rate by 7.3 times and the chlorine consumption by 40,000 dollars. It made a significant contribution to supply hygienically safe drinking water.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.2
• /
• pp.37-45
• /
• 2007

A lot of conventional algorithms has tried to cancel the Residual Frame Synchronization Error (RFSE), which causes the performance degradation of channel estimation when using interpolation in lattice-type pilot-aided Time Division Duplex (TDD) OFDM systems. Among them, a pre- and post-compensation method has been attractive to eliminate the effects of RFSE, providing good performance but requiring high computational complexity. In this paper we propose a new method which lowers computational costs by adjusting the starting point of TDD OFDM systems' FFT window in order to compensate for the RFSE. For the performance verification, we apply the proposed method to IEEE 802.16e standard and also estimate additionally required computational power of it compared to the pre- and post-compensation method. Simulation and implementation results show that the proposed algorithm has performance similar to the conventional method and is very efficient with low power implementation, requiring only 4.9 % of the power which the conventional method needs additionally.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.1-17
• /
• 2022

As pedestrian deaths account for a high proportion of traffic accident deaths in Korea, interest in pedestrian safety is growing. In particular, it is necessary to develop various pedestrian-centered traffic signal operation techniques to improve the pedestrian environment at signal intersections. Therefore, in this study, a method for time-of-day operating a pedestrian signal based on residual pedestrians was studied. To this end, the pedestrian signal operation technique in response to the pedestrian demand, which is operated by extending the pedestrian signal time only during the time when the pedestrian demand and the number of remaining pedestrians increase, was applied to the field. The difference in safety according to the application of the new pedestrian signal operation technique was statistically analyzed. As a result of the analysis, the residual pedestrian rate decreased by 20% (3.3 people) before application and 8% (1.4 people) after application, and the residual pedestrian rate in the crosswalk at the time of red signal decreased by 12% (1.9 people), And it was analyzed that the position of the residual pedestrian decreased by 3.3m from 5.2m before application to 1.9m after application.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.84-92
• /
• 2010

현재 가동 중인 몇몇 가압 경수로 원전 안전 1등급 설비의 이종금속 용접부는 일차수응력부식균열(PWSCC : Primary Stress Corrosion Cracking) 발생의 세가지 조건(민감 재질, 부식 환경, 인장응력)을 동시에 충족하고 있다. 즉, 이종금속 용접부는 PWSCC에 민감한 재질인 Alloy 600 계열 합금으로 제작 또는 용접되어 있으며 고온 수화학 부식 환경 하에 놓여있다. 아울러 오스테나이트 스테인리스 강의 예민화 예방을 위한 용접 후열처리 미실시로 높은 인장 용접 잔류응력이 작용하고 있다. 이러한 이종금속 용접부의 특성상 PWSCC가 발생할 잠재성이 있을 뿐만 아니라 국내외적으로 Alloy 600 계열 합금으로 제작 및 용접된 가압 경수로 원전 안전 1등급 설비의 이종금속 용접부에 실제 PWSCC가 발생된 사례들이 다수 보고되고 있다. 운전 환경 및 재질 변화 없이 PWSCC 발생을 예방하기 위해서는 인장 잔류응력을 이완시켜 낮은 인장 또는 압축 응력화하여야 한다. 이러한 인장 잔류응력 이완방법들로는 PWOL(Pre-emptive Weld Overlay), 레이저 피닝(Laser Peening), MSIP(Mechanical Stress Improvement Process), 워터 제트 피닝(Water Jet Peening), IHSI(Induction Heating Stress Improvement) 방법들이 있는데 공정 시간이 짧고 열 에너지 원이 필요 없으며 전체적인 소성 변형을 야기시키지 않는 레이저 피닝을 본 연구의 대상 방법으로 한다. 본 연구에서는 동적 유한요소 해석을 통해 용접 잔류응력을 이완시키는 레이저 피닝의 효과를 검증하고 용접 잔류응력에 미치는 레이저 피닝 변수의 영향을 고찰하고자 한다. 내부 보수용접이 수행된 경수로 원전 가압기 노즐 이종금속 용접부에 레이저 피닝을 적용한 경우에 대해 상용 유한요소 해석 프로그램인 ABAQUS를 이용하여 동적 유한요소해석을 수행한 결과, 고온 수화학 일차수와 접하는 Alloy 600 계열 합금 내면에서의 인장 잔류응력이 상당히 이완됨을 확인하였다. 또한, 최대충격 압력이 증가할수록, 충격압력 지속시간이 증가할수록, 레이저 스팟 직경이 증가할수록 내표면 인장 잔류응력 이완 정도는 감소하나 이완되는 영역의 깊이는 증가함을 알 수 있다. 또한, 레이저 피닝 방향이 잔류응력 이완에 미치는 영향은 미미함을 알 수 있다.